Your cart is empty.
Your cart is empty. FEATURE
*100% brand new, high quality, beautiful finish, testing is fine.
*Fine workmanship, high gloss, anti-oxidation.
*This bridge saddles enhance the tonal sound by creating a fuller even tone.
*Compensated with 5 stringed Jazz bass replacement parts, also can be a decoration of your bass.
*The wrench can adjust the height of the saddle.
*Equipped with 5 fixed screws, easy to install.
*Fully adjustable in height (action), and horizontal (intonation).
SPECIFICATION
*Bridge size (L x W): Approx. 95 x 50mm / 3.74 x 1.97inch
*Mounting Screws length: Approx. 20mm / 0.79inch
*String Spacing: Approx. 16.5mm / 0.65inch
*String Spread: Approx. 66mm / 2.6inch
*Steel material
*Black color
PACKAGE INCLUDES
*1 x Bass bridge
*1 x Wrench
*5 x Mounting screws
NOTE
*Before purchasing, please check whether the products are compatible with your products; and after receiving, please check the packages as below, including quantity, color, and so on. If you have any problems, please contact us at any time.
*Color might be slightly different due to the color calibration of each individual monitor.
*Please allow slightly measuring deviation due to manual measurement.
Francisco Gonzalez
2025-05-31 16:06:55
Perfect fit
Wayne Kirby
2025-05-21 15:47:35
No screw adjustment for intonation. You have to loosen the string, unclamp the saddle, move it by hand, guessing where it will intonate correctly. Even with that, it's still an improvement over the stock bridge.
Jsims4
2025-05-02 14:33:38
Great product..130 low b string almost doesnt fit. T ook some "convincing" to get it in.Other than that... great bass bridge!
Michael LeFebvre
2025-03-14 12:09:02
I was using a handheld screwdriver to install screws and the heads twisted off long before the screw bottomed out. Use your own screws
dashdrum
2025-02-10 11:58:53
I purchased this bridge as a replacement unit for a bass kit I was assembling. One the plus side, the bridge looks good, has sufficient mass, and seems to be solid - such that I suspect it will last for a good while.However, it is quite difficult to adjust both the string height and intonation. I am used to the classic bridge with machine screws and a spring for the intonation, and a pair of Allen screws for the height. The Hipshot bridge on which this model is based has both. To adjust the settings on this bridge, one has to loosen the string and push it to the side. Then, after the adjustment retune the string from fully slack. Second, it is easy to lose track of the previous position. When loosened the saddle and its "sled" can jump around. Finally, to adjust the height the sled must be removed entirely to loosen and move the saddle, which undos any intonation settings for that string.I think that once I finally get the setup dialed in, I should be set for a while, but it is going to be a difficult task. I won't buy this bridge for future builds.UPDATE: I have replaced this bridge after giving up on trying to adjust it successfully.
Anthony
2025-02-02 12:23:33
Exact fit for my bc rich mockingbird
henri c.
2025-01-27 20:00:55
works very well
Recommended Products
$22.43
$ 11 .99 $11.99