Your cart is empty.
Your cart is empty.Product Description
All Metal Shelf Pin Jig 1/4 Inch for Fastest Straight Hole Drilling
GOINGMAKE Shelf Pin Drilling Jig for Accuracy
GOINGMAKE provides high quality tools all the time and create more and more helpful and durable tools for DIYer, home owner and professional wood worker.
GOINGMAKE shelf pin straight hole drill guide is made of all metal and help you drill precise seven holes one time. Easy to use and perfect for shelves installation.
GOINGMAKE Shelf Pin Jig for Easy Work
Features of GOINGMAKE Shelf Pin Jig
Can easily drill 7pcs 1/4 inch holes at 32mm increments. You can also select 37/50/64mm offset depends on your need.
All Metal and 1/4 Inch Hardened Steel Drill Guide
Shelf pin jig is made of all aluminum alloy with 7pcs hardened steel drill guides.Durable and easy to drill 7pcs accurate straight holes one time faster.
37/50/64mm Offset
GOINGMAKE Shelf pin drill guide provides 37mm, 50mm, 64mm offset.Can meet different shelves size locating.
32mm Hole Spacing System
Standard 32mm hole distance is perfect for shelf pin hole drilling, hinges and drawer slides.
2Pcs High Quality 1/4 Inch Drill Bits
Including 2Pcs high quality and sharp drill bits help you drill faster and easily.
Build Your Own Shelves at Home with Shelf Pin Drilling Jig 1/4 Inch
Bill
2025-08-21 11:21:41
likes, all aluminum construction, seems very accurate and uses more sturdy 1/4 inch shelf pins instead of the 5mm onescomes with 2 bits which is a huge plus the competition makes you buy the 1/4 drill and only is set up for 5mm to start.this jig will work along side, for now, my other jigdislike is the fact it only has 1/4 pin capability not a deal killer in any way, and it has "pins" to support the jig on the edge again this is both an advantage and disadvantage as you can change the depth of where the pins are located BUT if you are making something smaller the jig may not calibrate consistently.on another positive you can replace the bits easily and commonly as they are not proprietary and simply standard 1/4 inch bitsthis will be a fine addition to my other goingmake tools and future ones
Pierre
2025-07-21 18:00:20
Outstanding tool easy to use the price is low the quality is high
CinemaPete
2025-07-18 10:22:13
I had a project where I was extending the depth of the bottom half of a bookcase I had made out of pre-drilled MDF from Home Depot. The original bookcase was 11" deep x 10' high. The extended depth of the bottom is to be used to hold audio gear and needed to be 18" depth, front to rear. I was able to increase the depth but had to insert additional panels on the left and right so that shelf pins could be installed. I needed a shelf pin jig to do that, and this jig was perfect for the job.After completing my holes and mounting some shelves I was pleased that the alignment with the inner portion of the shelf was perfect and the distance between holes lined up exactly as with the original panels from Home Depot.The jig is high quality fabricated aluminum, not plastic, and it comes with two drill bits, and stop and Allen wrench, including an instruction manual, all in an attractive plastic case.The jig is well worth the modest price and I would definitely recommend it for drilling shelf clip holes.
Kindle Customer
2025-04-18 18:06:18
It arrived quickly, was easy to set up and use.I drilled holes for shelves in several upper cabinets very quickly and accurateiy.
StillOK
2025-04-12 13:59:34
I used this drill guide to make holes for adjustable shelves in a closet remodel. The guide appears to be of good quality and design. The only problem I had with it is the locating pin is slightly larger than the diameter of the drill bit that comes with the set, so it was tough to get it engaged with the hole that I'd just drilled. The pin needs to be at least a few thousandths smaller, but even better would be to give it a slight taper. It could be a tolerance issue on the pin and I just happened to get one a bit over-sized, or the drill bit is slightly under-sized. Either way, they didn't match up very well. I wound up using a 1/4" bit that I had on hand and it worked acceptably well.
Elana
2025-04-07 15:16:33
Solid! Very well built and worth buying it.
Mike Bell
2025-03-11 17:22:32
This jig is AWESOME!!! I had previously bought a plastic jig and had a big issue with it blowing out the holes. I just drilled 300 shelf pin holes in my new garage cabinets with zero blowouts and the pins fit perfectly in each hole. The jig is extremely well made with plenty of hole location options. If you're needing to drill consistent and accurate shelf pin holes, this jig will definitely get the job done.
Null Pointer Expert
2025-02-26 16:03:30
I used this to make custom builtins for my wife. High quality build, easy to use, with great results. Very accurate and high value.
Peter gray
2025-02-20 09:54:43
works great, very accurate will buy from the company a gain.
JR Woodman
2025-01-10 16:03:51
Goingmake stuff? Just buy it.
Recommended Products