Your cart is empty.
Your cart is empty.From the Manufacturer
Use on 3-Inch or 4-Inch rotary table, the chucks are clearly numbered for ease of use.
Alberto R.C.
2025-08-18 15:05:00
I purchased this chuck for my 75mm rotary table, it fits very well with the included nuts and bolts. The quality and price ratio is ok, this is intended for the hobbyst not for serious manufacturing jobs. The jaws are not reversible and do not run smoothly since adjustment between the screws and the jaws is a bit tigh, I imagine that the use will loose them up. The chuck key is hexagonal so it can be replaced by an allen key if lost. This little chuck is the only option I've found for the 75mm rotary table sold for small shop machinists. I think this chuck will also fit in a 100mm rotary table and the mounting plate makes it versatile if you want to use it for other tasks. I already have used in my small milling machine and performed nicely. Overall this is a good piece of equipment for the small machine shop, an extra set of jaws for large diameter stock would be nice and not so tight screws could make my life easier. I'm very satisified with my purchase and happy now Amazon can ship it overseas.
Justin Hopkins
2025-08-13 13:18:48
This is a pretty good chuck for a hobbyist. The jaws are reversible if you swap the bolt around. The jaws do fit tightly and it hasn't really seemed to loosen up much, but it hasn't loosened while holding a work piece. I can't say the chuck key seems that solid especially considering the force required to move the jaws, I just use a hex socket on a socket wrench because of this and that works great.
ExtantFrodo
2025-07-21 09:04:41
The jaws would barely move until I filed them free of burrs. Now they work great!
br0nline
2025-07-04 20:42:39
Not too impressed. Jaws don't really fit and chuck base had signs of rust...
Mike. Crilley
2025-07-01 18:50:54
one has to be carefull of the centre of the workpiece, but with the two set of jaws and their reversabiity it makes a good chuck. I am workig on attaching it to another base plate for versatility so i will comment more later.
Customer
2025-06-25 11:06:22
Did not fit my lathe, but that was probably my lack of knowledge and not the item.
scott
2025-05-27 17:22:21
The 4 jaw chuck works great, it mounts to a rotary table with ease and the numbered jaws make for easy adjustments
Jrod
2025-05-08 17:47:03
Fits onto the HF and grizzly 3" rotary tables.
Ramborod
2025-04-13 15:07:46
I purchased this little 4 jaw chuck with the backing plate to install on a 3 inch dividing plate. It works and fits as it should. Came with the outside jaws. It was a little stiff in operation but after a wash in solvent and oiling that cleaned up well. Overall a great purchase from Amazon.ca
Daniel Cyr
2025-03-11 09:32:48
pour de petit tournage ,c'est très bien ,
chris kagesheogai
2025-02-01 13:44:41
works great with my lathe i already had a face plate that was suitable
James Kingdon
2025-01-29 17:18:58
Excellent small chuck, supplied well greased and with two sets of jaws with concave and convex grinding (for internal & external holds). Well worth the asking price, and a steal when on special offer.
David Krieger
2025-01-15 14:47:58
I'T SMALL BUT WILL WORK ON LIGHT METALS
Recommended Products
$82.60
$ 39 .99 $39.99