Your cart is empty.
Your cart is empty.The Inhab EV Load Manager is a UL Certified, flexible load management system designed for both retrofit or new construction applications. LM1160 monitors the home’s total energy being used and allows an EV Charger or other large load to draw power only when there is capacity to do so. It prevents the system from getting overloaded by automatically disconnecting power to this designated load when needed. As homes become more electrified, there is an increased risk of reaching the maximum electrical capacity in homes. The Inhab Load Manager is the needed solution to your challenges with potential system overload. It is compatible with any brand load center (100A-225A), for use with any brand residential EV charger or other type of load that requires a 2-pole circuit breaker up to 60A. The Inhab Load Manager facilitates a connection to a branch breaker within the electrical panel, all without impacting the load calculation. This offers a cost-effective solution for homeowners, resulting in substantial savings on electrical upgrades, installation expenses, and materials.
DesertDweller
2025-07-08 13:51:59
This device includes two current transformers that are installed over the two main hot lines at your service entrance or main breaker panel. The wires connecting the current transformers to the SIEMENS Inhab Load Manager need to be 500ft or less, this effectively limits the installation location to 500ft from the main service entrance or main breaker panel.The current transformers monitor the total load of your service, allowing you to set a point at which the EV charger or other load connected to the Inhab Load Manager will be turned on. Whenever the total load is less than the preset amps, your device connected to the Inhab Load Manager will be fed power. This allows for smaller services to use heavy loads such as Level 2 EV chargers safely.This could be used for anything, not just an EV charger. You could for example use it to turn on heat or AC to an outbuilding, but only when the main building is using less than the preset amps.Very useful in particular niche cases. This is the device you need when you have a large load that needs to be connected to a smaller service, and you want the load to only run when the existing service usage is low enough to allow for it.It's a clever design that keeps you safe from overloads.Construction quality is excellent. Everything feels beefy and durable. Comes with nearly everything needed to install. The price seems a bit high for what it is, but compared to a service upgrade, it's very reasonable.
Calbee Q
2025-03-14 10:11:13
The box is heavy duty and includes one (1) load manager and two (2) CTs, maximizes your existing electrical panel without expensive upgrades to your electrical service, easy to install and compatible with any brand load center (100-225A)For managing 2-pole loads up to 60A (such as EV chargers, electric water heaters, air conditioners, electric ovens, electric dryers, etc.)Due to the heavy weight of the box, it needs to be installed in areas with back walls, hollow walls cannot bear the weight!
Mil
2024-11-25 18:03:20
The media could not be loaded.
Recommended Products
$598.44
$ 99 .00 $99.00
$213.03
$ 99 .00 $99.00
$169.09
$ 80 .99 $80.99