Your cart is empty.
Your cart is empty.Softride springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker Softride springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Matt Frost
2025-08-29 12:34:27
Fit perfectly and look great!! Thanks
John M
2025-05-23 16:17:26
Too bad they didn't add the bushings what a pain to find the right ones Part # se39t your welcome 😉
kgerkins805
2025-01-13 11:47:28
This was said to give between 2-4.5 inches of lift. After they were installed they added 6" of lift. Way too much! Would not suggest these for anyone else.
Recommended Products
