Your cart is empty.
Your cart is empty.The Sound Town STRC-A8UT ABS road case is designed to meet the needs of musicians and pro audio/video professionals. The rack case is crafted with ABS construction and airplane-ready for your touring demands. It comes with 7U rack space and a standard 19â depth. Its removable front and rear covers provide easy and maximum access to rack rails. Better yet, the rack rails are built with 7mm zinc-plated steel and withstand long time use. The Sound Town ABS rack case is lightweight with no-compromise rackmount protection. It ensures industry leading strength and impact resistance. The retractable handle, built-in wheels and heavy-duty twist latches makes it easy to transport. Not sure which model is right for you? Check out this comparison chart: Model STRC-A2U STRC-A4U STRC-A6UT STRC-A8UT STRC-A10UT Rackable Width (in.) 19" 19" 19" 19" 19" Rackable Depth (in.) 19" 19" 19" 19" 19" Rackable Height (in.) 3.7" / 2U 7.2" / 4U 9.4" / 5U 12.7" / 7U 16.2" / 9U Internal Height (in.) 3.7" / 2U 7.2" / 4U 10.6" / 6U 14.1" / 8U 17.6" / 10U External Width with Lid (in.) 21.9" 21.9" 21.9" 21.9" 21.9" External Depth with Lid (in.) 24.5" 24.5" 24.5" 24.5" 24.5" External Height with Lid (in.) 5.9" 9.8" 13.6" 17.0" 20.6" Product Weight (lb.) 10.8 lbs 13.7 lbs 15.7 lbs 18.0 lbs 20.3 lbs Package Width (in.) 24.4" 24.4" 24.4" 24.4" 24.4" Package Depth (in.) 22.4" 22.4" 22.4" 22.4" 22.4" Package Height (in.) 7.5" 10.2" 14.2" 17.7" 21.7" Package Weight (lb.) 13.7 lbs 16.3 lbs 18.0 lbs 20.5 lbs 22.7 lbs  FEATURES Strong and perfect protection for your PA/DJ gears 8U case with 7U rack space, standard 19" depth Removable front and rear covers provides easy and maximum access to rack rails inside the case Lightweight ABS construction protects your gear when you're on the go Heavy-duty twist latches, built-in wheels and retractable handle makes it easy to transport SPECIFICATIONS Package Weight: 22.9 lbs Package Dimensions: 24.4 x 17.9 x 22.2 inch
Audience 1 Sports
2025-08-30 15:11:12
Needed a smaller case for special events. This works perfectly.The bottom does need space for the telescoping handle.Sturdy, well made travel case
Bill G.
2025-07-24 14:04:15
Slight damage, fell from a height of 4 feet. Protected the installed equipment. Just had to straighten the outer edge with a wooden mallet.
Jose luis santiago
2025-06-21 17:10:42
I bought this Rack And i had a little bit a problem with it because it was a little been in when I was trying to put the the Quitman on it it will not fit I will not find a place so I have to put a little pressure where it was been to make the equipment fit But after that Aidan the good
C.J. Johnson
2025-06-11 16:31:58
I like how much I can fit into a small space. I dislike that it ended up being very front heavy, which makes it awkward to carry. I suspect most components will end up this way. The wheels and the pull out handle take up quite a bit of space inside - so keep that in mind if you don't need the wheels and handle. The handle does not lock into place, so if you need to flip it around and push for a little bit, that doesn't work. A locking handle would be very helpful and make the wheels far more useful. All in all it's a good little rack system.
Ken Lawrence
2025-05-15 15:48:15
I bought this case to use as a go box for my ham radio equipment. While I've been able to make it work, I would not buy it again for the following reasons. The rack mount screw holes do not line up very well with any of the 19" racks or blank panels I bought to use with it. I had to tweak and twist the box and force the screws in at odd angles to get the screws in. The middle section of the enclosure where the handles are is indented making it impossible to get a 19" rack to fit in this section. I had to put my racks above and below this section which wasted space. On the pro side, it is a light weight case compared to others I've used, the handle and wheels make it easy to haul around. It is sturdy and should protect my radio gear well. But if I had to do it over I'd go with a different product.
Andrew
2025-05-07 14:39:03
I really wanted to like this case, but there are too many irregularities, and I'm not happy that I'll have to modify it with a Dremel for it to be usable (which also kills the splash proofing.Issue 1:The handle part of the cutouts so that you can pick it up, goes in too deep closer to make the rack space 17.5-18" instead of 19" standard. So you lose over another 2u of space unless you have items that don't need the width advertised. So far, I can only use PDUs and 2 pieces of gear in this area. It has to be arranged awkwardly around the middle section. Not knocking the bottom 1U space used for the wheels, as stated on their page.Note that I've tried using both standard 1U racks and gear from my other server racks (which had no problems), and they would not fit in that middle area. It might be that the case is slightly warped, but it is not perceptible if it is. This should not affect the distance between threadholes and definitely not to the point that the ears (WHICH HAVE GIANT SPACES to allow for wiggle) can be secured in the top/bottom for each rack ear.Issue 2:The holes (the old-school threaded telecom/audio-style ones but fine for 9/10 requirements) are not even aligned, so I have to choose to screw the tops of rack ears or a mix of them (top/bottom/ bottom/bottom). I can't screw in 4 of any of the holes in any rack gear for multiple racks. I should note that I'm using their provided hardware (spaces/screws).Overall, you get 5U space in the box (advertised at 8U, 7U space usable), but you use about 2U and one mount hole for the handle they extruded too deeply.I wanted to like this case, but too many issues. See the pictures. Nothing silly going on; those are holes, not tricks of camera angles.
Michael B.
2025-04-22 20:11:33
I am using as a tote for event recording. Added a shelf to divide so as to accommodate an unmounted splitter snake and multi channel recorder. As well as a few xlr cables and accessories. Plenty of room, sturdy and portable.
DJDave
2025-03-08 17:10:47
Rack holes do not line up even close to correctly, and some require a drill/impact driver to get the bolts in. Terrible / non-existent quality control. I may not be able to use all 11U available, or I will have to place items in the rack in the wrong order to get things to line up.
Bosabose
2024-12-30 17:45:52
The rack was just perfect for my Hobby DJ needs.
Paul Varro
2024-11-28 10:54:39
This is a good quality portable case for you DJ equipment. It is rated as a 4U case, but is more like a 3.5U.I had to use some tin snips to trim the inner metal edge to make it fit 4U worth of equipment, otherwise I would have rated it 5 star
Recommended Products
$169.95
$ 80 .99 $80.99