Your cart is empty.
Your cart is empty.
Fits the Following Vehicles:
1999-2007 Ford F250 Super Duty Truck
1999-2007 Ford F350 Super Duty Truck
1999-2007 Ford F450 Truck
1999-2007 Ford F550 Truck
Replaces Part Numbers:
924-528, 6C3Z1A131AA, 2C3Z1A131AA, F81Z1A131AF, XC3Z1A131DA, YC3Z1A131AA
Quality Guarantee:
12-Month Warranty
At Gledewen, we take pride in the quality of our products and in your satisfaction. If you have any problems, do not hesitate to contact us.
Jeff
2025-08-27 19:56:04
Fit my 03 Ford F-150, 2 wheel drive, super cab short box truck. Did not come with bolts so keep the original 2. Someone mentioned that it will not lower on it's own without weight and I saw that as well so I pulled some out on my work bench, once installed it would be awkward to lower the cable my yourself. Overall happy with the purchase.
Matt
2025-08-23 12:07:30
This hoist is 1/3 the cost of OEM and so far is a clean reproduction that works like OEM. It bolts up like it should with no complaints. Durability is unknown but it’s replacing a 25 year old part so I’m sure it will last atleast half as long.
Customer
2025-07-05 12:52:24
First of all, the bolt holes don't line up. I had to drill the frame bigger to get the bolts in the hoist. At that point I should have checked out the part closer. The new hoist sits at a perfect right angle to the mounting plate while the original hoist doesn't. Anyone that has changed a tire knows you need to attach the lock key to the extension rod Ford provides and stick it the hole provided in the rear bumper. The hole in the bumper is slightly lower than the hoist so the hoist needs to tilted slightly down towards the bumper so the lock key meets the hoist evenly and does not spin out. This hoist is not tilted making it impossible to get the key to sit flush against the hoist. The key kept jumping off the hoist till I looked at the old hoist and realized what was wrong. Horrible fit.
Tommy Wainwright
2025-06-25 11:04:29
Hole alignment was off about 1/8 inch. I drilled out both holes (on the truck) about 1/16 inch and added washers. It fits and works perfect.
Mellyhawk
2025-06-17 16:37:26
Easy to install and works like it should. Really enjoy removing the key requirement to raise and lower the spare.
john
2025-06-12 13:52:37
replacement for the Spare tire holder on Ford trucks.
Meister
2025-06-04 12:06:26
Operates well
C_Review
2025-05-20 12:33:59
While the Amazon part for assured me that this would fit....it didn't. However, this is not unique to this particular brand/part. This is the 3rd part (2 from a different vendor) that I was assured would fit just like the OEM. They are very similar but the distance between the integrated nuts in opposite corners is 1/4" difference. I had to modify (drill out with step bit) my stock truck AND the part (cut a 1/8" notch) in order to get them to line up. (No, I do not have a replacement bumper, bed, or any previous mods to the spare carrier.)With mods, it works fine and it's cheaper than OEM.But beware the bolts may not line up.
Lynn Morgan
2025-05-03 17:56:28
used to hang spare tire under the truck
Maddy m
2025-05-01 11:33:21
Easy to install, works well, seems well made.
Cam
2025-03-16 17:56:50
Seemed like a quality part until I looked under the back of my truck yesterday and noticed that my spare tire was gone. Apparently the cable snapped. Good stuff!
Customer
2025-03-03 11:55:01
The mounting bracket does not lineup with the truck frame, how to elongate the mounting bracket holes. Other than that worked great
George
2025-02-12 20:58:49
Product was fine I believe my opinion matters so you can pay me for my time
Recommended Products
