Your cart is empty.

SpeedyBee F405 AIO Flight Controller: 40A 25.5x25.5 3-6S Bluejay FC ESC PDB Board with Wirelessly Betaflight Setting INAV for 2inch 3' 4' and Ultra-Light 5inch FPV for DJI O4 O3 AIR Unit/PRO

4.8 (5) Write Review

Free shipping on orders over $29.99

$65.99

$ 31 .99 $31.99

In Stock

Qty.:

About this item

All-in-One Design: The SpeedyBee F405 AIO 40A flight controller integrates an ESC and flight controller into a single compact unit, saving space and simplifying installation on 3-6S FPV drones.
High-Current 40A ESC: Equipped with a powerful 40A ESC, this flight controller supports 3-6S LiPo batteries, providing ample current for demanding FPV freestyle and racing drones, allowing smooth power delivery for agile maneuvers.
Bluejay Firmware Compatibility: Pre-installed with Bluejay firmware, this flight controller enhances motor performance and efficiency, resulting in smoother flights and reduced power consumption.
Compact 25.5x25.5mm Mounting: With a 25.5x25.5mm mounting pattern, the SpeedyBee F405 AIO easily fits into compact drone frames, making it ideal for mini and micro FPV drones where space is limited.
Advanced F405 Processor: The built-in F405 processor delivers reliable performance with quick response times, ensuring stable and responsive flight control for racing, freestyle, and cinematic FPV drone applications.
【Expert Support】 For any issues, please contact SpeedyBee technical support first. We're here for prompt assistance and solutions.

Product Description

STM32F405 MCU, More Powerful Than F411, More Compatible Than G4

More Features

Meteor LED Function.Customize Your Own Style

When connecting the LED strip, use the included BEC for voltage regulation.LED strip need to be purchased separately.

Configure FC ESC & Equipped with ICM-42688 Gyroscope Hardware Filtering Further Enhanced!

With an independent LDO power supply and PSRR suppression ratio up to 100dB, the output ripple is reduced to just 1.3mV! This boosts gyroscope accuracy and enhances flight stability.

Equipped with New SPA06-003 Barometer Precision Further Improved!

Barometric measurement accuracy increased to 0.5%, and relative pressure accuracy improved to ±0.03hPa, equivalent to ±0.25m.

Flight Controller Specifications:

Product Name: SpeedyBee F405 AIO；
MCU: STM32F405；
Gyro: ICM-42688P；
USB Port Type: Type-C；
Barometer: SPA06-003；
OSD: Supported；
Bluetooth BLE: Supported, Bluetooth speed enhancement - 2.0；
Wireless Flight Controller Firmware Update: Supported (no need to press physical BOOT button)；
Wireless Download & BlackBox Analysis: Not supported；
DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering；
6-pin DJI Sky Port Direct Insertion: Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order；
Flash (for BlackBox): 8MB；
Betaflight CC Pads (Camera Parameter Adjustment): Supported；
Input Voltage: 3S-6S LiPo battery；
4V5 Output: Two 4V5 outputs; total current 1A；
5V BEC Output: Three 5V outputs; total current 2A; shared with 4V5；
9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A；

MOTOR: M1-M4；
UART: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])；
ESC Telemetry: None；
I2C: Supported；
LED Pads: Supported, used to control WS2812 LED lights；
Buzzer Pads: Supported, BZ+ and BZ- pads；
BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery；
RSSI Pads: None；
SmartPort: Not supported；
Supported Flight Controller Firmware: BetaFlight (Default), INAV；
Firmware Target Name: SPEEDYBEE F405AIO；
Mounting: 25.5 x 25.5mm, 2mm hole diameter；
Dimensions: 33.0mm (length) x 33.0mm (width) x 8mm (height)；
Weight: 13.6g (including CNC)；

ESC Specifications:

Product Name: SpeedyBee F405 AIO；
Input Voltage: 3-6S LiPo battery；
Continuous Current: 40A；
Burst Current: 45A (10s)；
ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors, please use with caution；
Output Voltage: VBAT battery voltage (used to power the flight controller)；
Current Sensor: Supported (Scale = 254, Offset = 0)；
Firmware: Bluejay JH-40 48kHz.

Charles

2025-07-26 11:34:37

Great little FC ESC combo. Only issue I've had is the negative grounding points on the board, ordered one directly thru speedybee on pre-release and one thru here. Both had same ground pad soldering issues. Have to super clean the ground points with iso and soft brush in order to get good soldering penetration and not have the solder joints pop off.Hooked directly thru betaflight, all components are good from factory, flies stable.

Richie

2025-06-28 17:01:38

Works as intended

Jessee Johnson

2025-03-28 16:20:22

I have bought a few of these now. They work great and take minimal space ðŸ˜ hook ups for everything. Have been flying these since they were first released and no problems yet. They are durable and powerful. I will be getting more ðŸ˜

Scotty

2025-02-27 14:36:50

Works extremely well. Ran about 20 packs through with zero issues. A little heavy but worth the weight in cooling. Worth every penny.

jeremy emsley

2025-02-12 12:29:54

A little heavy for an AIO but works great and can handle alot of crashes and keep working, in the motors tab with bidirect dshot on you will notice small error's at 4k x dshot 300 i found this to be nothing to worry about all works with no problems but if this bothers you just run 2.7k x dhsot 300 and that goes away this is something runcam/speedybee should take a look at also be very careful if you decase it theres is a lot of glue holding the heatsink on and because of this very easy to damage this AIO its best just to leave it on as its still lighter than a stack.

Shopping Cart