Your cart is empty.
Your cart is empty.
The START International LAB01 manual bottle label applicator applies labels to bottles, cans, jars, and other cylindrical objects from the diameter of a small tube to a one-gallon container. The LAB01 places labels in the same location for accurate and consistent placement. It can be adjusted without tools for different label sizes. The applicator housing is made from anodized aluminum for durability. The LAB01 is made in the U.S. This labeler is suitable for short runs of bottle labeling.
Specifications
Label Width Capacity 1 to 6.5" (25 to 165 mm) Label Length Capacity 0.5 to 12" (13 to 305 mm) Bottle Diameter 0.5 to 6.5" (13 to 165 mm) Overall Size of Unit 13.5 x 11.5 x 22.5"/343 x 292 x 571.5 mm (H x W x D)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Label dispensers and label applicators help remove a label from its liner or backing paper. They are used in manufacturing, bulk mailing, packaging, and the food and beverage industry. Manual label applicators and multi-roll label dispensers are useful for small jobs. The operator pulls the liner or backing paper around a plate or a bar, peeling the label away from the liner. High-speed electric label dispensers are often used in industrial settings. When the operator removes a label, a sensor detects its absence and switches the motor to advance the label roll. The label is pulled over a strip plate, which separates the label and its liner. Electric label dispensers use either a photosensor or a limit switch as a sensor. Specialized label dispensers of both manual and electric types are designed for labels of unusual size or material such as bottle and jar labels, die-cut parts, and hang tabs.
START International manufactures tape dispensers, label dispensers, and optical inspection tools. The company, founded in 1981, is headquartered in Addison, TX.
What’s in the Box?
- LAB01 manual bottle label dispenser
- Instructions
Customer
2025-08-18 14:05:29
It is really very tricky and hard to use, the label got wrinkled, or awry, crumples, and there is no way to get more info on how to install it properly....
T. (M.Engineer)
2025-08-14 16:23:30
This is such a well designed machine and easy to adjust to different bottle sizes. Also, easily adjust to the exact and consistent placement on the bottle as well.... This really has increased my companies productivity. What's also nice is that there is literally nothing to break on this machine. Super sturdy.I had a question about the set up in the beginning so I called START International and their customer service was excellent. I was set and applying labels in no time.
Frank in Va
2025-07-24 17:17:12
Just didn't work well for me. I had two bottle sizes and bother were easier to just peel off and add. Big disappointment.
Z
2025-06-09 11:05:46
Don't buy this if you are using this to amp-up production or save time. I read the previous reviews and thought i'd try it anyways.Not a good idea. The labels are NOT consistent. Every label comes out too high or too low. I have spent more time readjusting the machine/ tinkering/ fixing labels by hand. There is also nothing to really adjust either so you can't pin point where the problem is exactly because its such a simple yet poorly made machine. I am not happy and will be sending this back.
Janice Marie
2025-05-31 13:45:37
I truly like this labeler. It makes life much simpler for my company. I would definitely recommend it.
JayV
2025-02-23 10:11:53
so disappointed! I EXPECTED THIS TO REALLY COME IN HANDY AND SPEED UP OPERATIONS. It did the exact oppoisite. From the start it just never rolled correctly. Not sure if I got a used one but will never buy another for sure!
Steven Marshall
2025-02-21 12:42:27
This labeler is not very well designed. Even though there are guides on the label roll spool the labels get crooked very easily and the do not apply evenly. It takes a lot of re calibrating to get it to do a few bottles and then you have to re calibrate again. Would not recommend.
Mike
2025-01-19 10:58:34
Own a brewery, and bought this to label Quart sized cans (before only used printed glass growlers). We use large labels (6"h X 10"w) and it can hold a roll of 1,000 (just barely). You'll want a #4 label dispense option for the label roll (your printer will know what you're talking about), as shown on the video. I labeled about 1800 cans in 5-6 hours today so it works very well, especially for the price.There are some nuts on the screws of the two knobs (shown in the picture) that need to be adjusted higher so the knobs can tighten the end roller securely to the paper feed. Once you figure this out, and adjust the knobs until you get an even label placement, you're golden.Short of buying an automated canning line, I would recommend this product.
Sebastian Acosta
2024-12-09 15:44:15
VenÃa una pieza faltante.
H'OAT NATUREL
2024-12-04 13:25:52
Après le réglage, c'est un trés bon outil facile à utiliser
C n Scott
2024-12-01 17:39:06
Bargain price, great quality
Recommended Products
