Your cart is empty.
Your cart is empty. This is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 2.1A, allowing for a holding torque up to 65Ncm(92oz.in).
Electrical Specification:
* Manufacturer Part Number: 17HS24-2104S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 65Ncm(92oz.in)
* Rated Current/phase: 2.1A
* Phase Resistance: 1.6ohms
* Inductance: 3mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 42 x 42mm
* Body Length: 60mm
* Shaft Diameter: 5mm
* Shaft Length: 24mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 500g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
Firephinx
2025-08-20 13:57:50
Very well built, powerful, and well packaged stepper motor. Does exactly what I needed it to do and came quickly. If I needed more stepper motors, I know that I can buy one of these again with no problems. I used it for a class capstone project and it never failed me.
Dan
2025-08-15 13:32:21
These are great steppers. I am using them in a new 3D printer build. They have a lot of torque do not get very warm after hours of printing.
R George
2025-07-25 11:45:06
I have two drives for the Right Ascension on my telescope. A smaller stepper drive for the clock drive, and this larger more powerful stepper motor to slew the telescope around ( 6 hours in about 10 seconds). A smaller motor doesn't have enough power to overcome the clutch system to turn the telescope, but this larger motor (running at 2400 steps per second) easily turns the telescope.
John
2025-07-13 14:36:58
These seem to be great steppers, beefy, solid, work well on my DIY CNC machine and are producing reliable results.
LionCat
2025-07-02 16:00:09
Small size for torque in a NEMA 17 MOUNTING
Nathan M.
2025-06-30 21:45:43
I use these guys for my extruder, awesome stepper motor, strong and hasn't given out for the beating I give it.
leland modoc
2025-06-10 19:59:11
Came exactly as advertised. was packaged extremely well.
Biggie's Equipment
2025-05-05 13:26:59
Great little motor and after running hard it was not very hot always a good sign of good quality.
Manuel Bergeron
2025-05-04 13:06:36
Même couleur que sur la photo!
Niclas
2025-02-03 14:51:15
it works
lorenzo
2025-01-10 18:51:27
ottima per la mia cnc
Daniel
2024-11-28 17:53:50
Usado en una impresora 3D para el eje Y ya que el peso de la cama influye en la velocidad y precisión, lo recomiendo al 100%, consigo alcanzar velocidades de 500mm/s en recorrido y 6000mm/s cuadrados en aceleraciones en una simple cartesiana, eso si, chetada hasta los topes y klipper. Si queréis un proyecto similar recomiendo este motor para el eje Y, para el X quizás sea demasiado pesado y tendréis que actualizar los motores del Z para contrarrestar el peso extra
quompaCC
2024-11-25 14:56:53
Hab die Motoren beim meinem voron clone im Einsatz. Habe die Motoren mit 1A im Betrieb, die werden nicht mal lauwarm. Im Vergleich mit den kleinen Motoren die ich vorher im Einsatz hatte, die schon bei 0,8A extrem heiß geworden sind. Kann ich auf jeden Fall nur empfehlen.
Recommended Products
$41.91
$ 21 .99 $21.99