Your cart is empty.
Your cart is empty.Product Description
Coil DPDT PCB Power Relay 8 Pins 2NO 2NC
Coil Voltage：DC3V, DC5V, DC9V, DC12V, DC24V
There are 5 models for you to choose.
Long operational life.
Stubbie
2025-09-05 11:19:27
For my application, their drop time was too slow. Not a defect in the part, just not the right part for me. Pretty consistent pick voltage, an attribute I found variable with other relays. Important when you are using just an RC to build up to pick.
Mike T
2025-08-25 12:00:19
These arrived on time and in good condition. As others mentioned, they're just loose in a plastic bag, and it would be better if they used a piece of foam or even cardboard to protect the pins. A few were a little bent, but easily straightened without break them. Lead spacing is standard so they fit solderless breadboard, vector board, stripboard. Contact resistance was 0.0 ohms. Coil current at 12Vdc was 16mA.
MLR
2025-07-28 13:06:38
I bought a bunch for a project I was constructing. Then some failed after the trainer was moved. I thought maybe after some use the contacts where carbonized, though the use was far lower then spec'd. Took them apart and found that the top orange plastic casing was very soft. I was gluing the relays casing to frame with hot glue. Well the casing was metal and cooled fast. The pressure I applied was not hard, but it distorted the casing and pushed the non moving contacts together. The clearances between the casing and the contacts is almost nill, so the casing pushed in enough to permanently push the contacts together.
netRanger
2025-07-20 18:25:20
A tiny bit of largwr print documentation would have been nice; however, the pin connections can be read on bottom of relay in the right light. In any case, worked as advertised. Great value for my 3v projects
W. R. Jordal
2025-07-11 13:11:37
Works as expected. Great value for the cost
Pat Dowell
2025-07-08 12:54:36
Their cases, as others have noted, are fairly thin and not very sturdy. But as long as you mount them securely on a circuit board and don't put any outside pressure on them they work just fine.
Bill Bryan
2025-06-14 11:22:13
They were simple 12volt DPDT relays.
Steve
2025-05-29 11:14:53
Used three of these twelve volt relays to integrate a Bluetooth receiver into a thirty four year old OEM car audio head unit. They’re working wonderfully, switching power and the audio inputs. I can’t tell you how awesome it is to have an old stock car stereo that supports Bluetooth.
J. Diviner
2025-05-15 21:29:53
Work perfectly as expected, had no problems.
Scooter McGavin
2025-04-15 16:03:08
These relays seem to be working very well for me. Took a while to figure the pin orientation out. FYI there is a faint diagram molded into the black part of relay. One note I would like to mention to buyers is the pins are quite short and not very thick. Make sure your circuit has been tested thoroughly before soldering these. I broke two pins off very easily trying to unsolder a mistake I made. Good relays , good buy.
Tom
2025-02-09 16:53:25
These work very well, and are the exact replacement you might need, if you did something foolish to your OGS-50W amplifier. ;)
Old Man T
2025-01-07 13:29:35
Functions exactly as you would expect. Decent price point but why oh why do they not ship them taped with their pins into a piece of styrofoam to protect them from bending in transit.Otherwise after a bit of straightening they have been working well for me.
Chuck
2024-12-23 16:57:27
Great way to cheaply build stock for quick turn around for my clients
Recommended Products