Your cart is empty.
Your cart is empty.Product Description
HLR01 HomeLink Remote Control Kit Works with All TOPENS Gate Openers
TOPENS HLR01 HomeLink Receiver allows for seamless control of the gate opener through the built-in HomeLink system in the vehicle. Simply press the HomeLink button to enjoy instant access to your property.
Why Choose TOPENS?
Founded in 1998, TOPENS is one of the America's well-known and trusted consumer brands in gate automation industry.
TOPENS is always committed to providing the high-quality products as well as helpful service. When you have our products, you also get the favorable 12-month war-ranty, life-time tech guidance, and outstanding system consultant service.
We have a knowledgeable, talented team of technicians to assist you with all of your questions and troubleshooting.
Steps to Complete the Setup
Terminals Introduction
The receiver can be wired to the gate opener system via PORT 1 or PORT 2. Remote control button A is used to control PORT 1, while button B is used to control PORT 2.
HLR01 can be powered by the control board of the gate opener or by the external 12-24VDC power source.
HomeLink Pairing
1. Press and hold the HomeLink button for about 20 seconds until it entering programming mode.
2. Continue to hold the HomeLink button, and place the remote 2~5 inches away from HomeLink.
3. Press and hold the button on the remote.
4. Keep both buttons held until the programming is successful.
TOPENS HLR01 HomeLink Remote Control Kit - Highlights
-
Incredibly Convenient
- Eliminates the hassle of carrying separate remote controls, providing unmatched convenience.
-
Dual Channel (operate with remote)
- The HLR01 receiver can connect with two gate operators.
- After the PORT 1 and PORT 2 on the receiver are connected respectively, the A/B of the remote control can be used to control the respective gate opener.
-
Dual Channel (operate with HomeLink system)
- The distance between the two gates should be within the control range.
- Once programmed, every press of the HomeLink button makes the gate effectively operate between open-stop-close-stop-open.
-
Code Complication
- The HLR01 remote control uses code-copying technology to pair countless vehicles. Realize multiple vehicles to operate the gate opener. Advanced security code technology keeps the gate opener system safe.
- Frequency: 315MHz
Note: HLR01 is compatible with most third party gate opener or garage door opener whose control board accepts the "Normal Open Dry Contact" signal for the push button.
-
More Information
● Operating Current: Max. 70mA ● Output: Relay SPDT
● Channel: Dual Channel ● Modulation Mode: ASK (AM)
● Working Temperature: 0°F to 120°F (-20℃~ +50℃)
● Control Range: Max. 50ft. (15m)
About Signal
To extend the control range, it is recommended to stretch the antenna out fully or replace the original one with a new antenna.
HomeLink Receiver
2.2 x 3 x 1" (55 x 75 x 25 mm)
The receiver only works with the gate / garage door openers, and does not support other door access control systems.
Remote Control
1.1 x 2.4 x 0.4" (27 x 60 x 10 mm)
Battery of the Remote Control: 2 x 3V Lithium Cell CR2016 Battery (Incl.)
Help
Choose TOPENS accessory, visit our website to download the user manual, watch the installation video and enjoy consultant service directly.
-
Access & Control
- TC196 Tuya WiFi Remote Control (Asin: B0CGR6XX62)
- M12 Remote Control (Asin: B075L4BN21), ERM12 External Receiver (Asin: B075KHPLHD)
- TC188 Universal Keypad (Asin: B09VGTCCJQ), TC175P Wired Keypad (Asin: B07ZTB33JK), TKP3 Wireless Keypad (Asin: B075K783DS)
- HLR01 Homelink Remote Control Kit (Asin: B07CWNX1P8), TEW3 Vehicle Sensor Exit Wand (Asin: B07DF8ZQNB)
-
Push Buttons & Power Supply
- TC148 Waterproof Wall Push Button (Asin:B09VGKDNQL), TC147 Wired Push Button (Asin: B07ZTB2TQH), TC173 Wireless Push Button (Asin: B07ZTC75CX)
- TSP30W 30W Solar Panel Charging Kit (Asin: B07ZTBRVXL), TSQ20W 24V 20W Solar Panel Kit (Asin: B09PH859S5), TCS3 Solar Charge Controller (Asin: B07ZTC6317)
- UPS01 Uninterrupted Power Supply (Asin: B093GF6DM7), DPS180-U AC-DC Power Supply (Asin: B07DF8HQV3), TS24-U Adapter (Asin: B07CWNP9R6)
-
Safe & Security
- ET24 Electric Gate Lock (Asin: B07NKQH8H3)
- TRF3 Reflection Photocell Sensor (Asin: B07ZTCMWFT), TC102 Photo Eye Beam Sensor (Asin: B07ZTB4VML)
- JD24VY DC 24V Warning Light (Asin: B07ZTB326B), JD110VY AC 110V Warning Light (Asin: B07ZTB175Z)
-
Cable, Chain & Gear Racks
- 25FT Extension 5-Conductor Cable (Asin: B07WCW6W8T)
- LT08B 20 Feet Roller Chain (Asin: B07ZTBD6JZ)
- PYCGZT Limit Switch Magnet (Asin: B0BXNCG9S2)
- SR02 Heavy Duty Steel Gear Rack (Asin: B08HRXRVKW), RNH2 Heavy Duty Nylon Gear Rack (Asin: B093FCGDM7), RNH4 Heavy Duty Nylon Gear Rack (Asin: B078TCZ7TT)
Jared Julian
2025-07-01 13:35:41
Installed with a Vevor brand dual gates swing openers setup. It was pretty simple just needing 2 wires for + and -, and the other 2 for the external controller terminals on the main board. I had to do a little deciphering between the included instructions and my opener’s instructions to identify what wires went where but not at all complicated. The Included remote Paired easily with both vehicles homelink buttons (20120 Acura MDX, 2018 Ram 1500). Hopefully it lasts!
Robert in Fort Collins, CO
2025-06-14 21:12:03
PRO: I have a Genie 7050 garage door operator. The remote for it only works inside the garage so I bought one of these to address the problem. It works great with the included remote and the HomeLink remote mirror in my ID.4.CON: I purchased additional M12 remotes, and they DO NOT work at all. They're getting returned and I'll try again but it would have been better if could purchase a couple more of the remotes that are included in the original receiver.
Solidcore
2025-06-01 14:24:19
Simple installation according to the instructions provided with the unit. Remote worked fine. We hadn't programed our vehicles yet and for no reason the gate began opening and closing on its own. We tried contacting customer service who you would hope at this point would provide help ASAP, their answering service only recommended leaving an email request on their web site. We removed the Home-link adapter and the gate functioned properly as before. We returned it to Amazon and have no confidence to order it again.
Joshua Coleman
2025-05-07 11:53:42
Easy Install. I looked up the wiring diagram for my topens a8 gate system and had it installed and working in about 20mins.A bit over priced, in my opinion, for what it is. But it does work and will be one less crappy remote to use for the gate.The gate opener itself has held up for a few years now but the remotes.... the only stinking remotes that I can get to work with it are junk.Now I can use much better remotes that are homelink compatible for my vehicles without homelink built in.
Bob
2025-04-03 15:33:04
This connected right up with my 2024 vehicle but not my 2006. That’s okay though, since you get a remote to use for training and I use it in the 2006 vehicle. It was a cinch to hookup to my TOPENS gate opener. It works pretty well but the range seems limited and there’s a little bit of lag. The combo of these 2 issues can lead to an impasse and the gate not opening. So you have to be pretty close, use a quick light press and wait a bit for it to activate.
Wine on Fire
2025-03-27 15:58:18
This item connects easily enough to the Topens gate opener main board but does not come with all the necessary items for a complete install. The instructions are not clear.It does NOT come with (1) wiring and (2) water proof housing. Topens should include these items, especially since gates are generally installed outdoors.The instructions should probably include this but the antenna comes coiled inside the housing. If you install it as is, the range makes it practically useless. After trial and error and some research, I found that you have to (1) uncoil the antenna wire and (2) make sure it's out in open air and not obstructed
Jorge R. Obando
2025-03-25 14:38:27
Great product! We added this to our Topens setup after installing the grate controls, it made our life easier. Works great and customer support from Topens is excellent... highly recommend it!
Potatopirate
2025-03-07 14:48:16
First off, the customer service was great. They responded to my questions very quickly! If you have an input for a push button switch on your garage door opener this will work. In my case I didn't have an push button switch input but I modified the wall mounted unit to add an input for a button. Now I can use my the Homelink buttons in all three of my older cars to open the garage doors! I haven't noticed any issues with range, it's worked great.
Customer
2025-02-19 16:24:36
Works great. Easy to install and program. Is not waterproof, however, so additional waterproof enclosure purchase is required.
luc gareau
2025-02-11 14:05:57
me fonction pas avec kia niro ev 2020
Customer
2025-01-23 16:42:27
Bought this so I could use the built in homelink in my car. Don't like having to carry extra remotes if I don't need to. Does work as it should , uncoiled antenna wire and ran out of my gate box to get better range, promptly ripped it off so had to solder new wire on... My mistake though.
Recommended Products
$32.97
$ 13 .99 $13.99