Your cart is empty.
Your cart is empty.Product Description
Universal Ceiling Fan Remote with Light Dimmer
Universal Fan Remote Kit Works Most 3-Speed AC Ceiling Fans
- Universal ceiling fan remote control kit works most major 110V 3-speed AC ceiling fans, compatible with Hampton Bay, Harbor Breeze, Hunter, westinghouse, Litex, Home Decorators Collection, Honeywell and other brands.
- This universal ceiling fan remote controller is designed to separately control your ceiling fan speed and light brightness.
- This universal fan remote harbor breeze have 5 buttons, 3-Speed (High/Medium/Low) and OFF for fan speed control, Light Dimmer for dimming control.
- Light dimmer just controls the brightness of the incandescent lights and dimmable LED lamps, most LED lamps and all CFL bulbs are non-dimmable, light dim
- The green luminous button is for dimming, this button is made of fluorescent material, it can help you find the remote control in the dark.
- This package does Not Include a Receiver and 9V battery
- Not has Reverse button, but compatible the fans that has reverse switch itself.
Easy to Install
1, Setting the codes on the remote control and receiver
NOTE: It is imperative that the code used for both transmitter and receiver is exactly the same, otherwise remote controller will not work.
The default settings is 0000, and it is not recommended.
2, Installing receiver in ceiling fan
WARNING: To reduce the risk of fire or electric shock, remember to disconnect power. The electrical wiring must meet all local and national electrical code requirements. The electrical source and fan must be 110~120 volt, 60Hz.
Do not use this product in conjunction with any variable wall control. Incorrect wire connection can damage this receiver.
3, Operating transmitter
Install a 9V battery(NOT INCLUDE in the Package) in the remote, and you can control your fan now.
Set different PIN code if control multiple ceiling fans
NOTE:
- If you control multiple ceiling fans in the house, please check the PIN code settings are different between these, or it may let transmitter next door or your neibourhood's remote activates this ceiling fan in your other rooms. This may cause the fan turning on strangely while you are not at home.I
- f you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
Specification
Specification
Input voltage: 100-140V
AC Frequency: 50/60Hz
Require Battery: 9V battery (not included)
Properties of Lights in Controller: Relay on/off
Radio Frequency Band: 303.9MHz
Remote Control Range: 50 ft
Package Includes (9V battery is not included)
1* Remote Control 1* Receiver 6* Wire nuts 1* Wall mount 2* Screw 1* Paper description
Customer
2025-09-02 11:23:39
My beautiful fan works again with this new part. It came quickly and it was easy to install. Make sure that adjust the numbers on both the control and the fan piece otherwise the control will not work.
Jackie R
2025-08-20 09:57:28
works well
Randy Burkhart
2025-06-01 14:57:04
The remote switch worked great
Beth
2025-05-25 17:19:15
Worked great after original ceiling fan capacitator stopped working. Bought two 2ï¸âƒ£ as two fans stopped working. The remote control is a nice feature, too. Recommend product.
Zigeuner
2025-04-28 15:06:59
This is an excellent unit. I like that fact that it is powered by a 9 volt battery. My previous unit failed and I replaced it with this one. I had mine professionally installed due to the height of the ceiling. It took only half an hour to exchange the previous unit with the new one. Ir will work with Hampton Bay and other similar fans. I easily controlls the lights and three-speed fan. I highly recommend it.
C. J.
2025-04-27 12:20:16
Bought this for a bedroom fan we were installing. Wired up the fan, it worked fine. Left the fan on high as per the instructions. Turned the power back off and wired in the receiver. Turned the power back on and tested the remote, it worked perfectly. Came back to the room 2 days later and tried to use the fan. It would not run. Turned the power off, unwired the receiver, turned power back on. Fan worked perfectly fine. Requested a replacement. Replacement came in. Wired fan back up, turned on, made sure it was set on high, turned power back off as per instructions. Unwired fan, wired in new receiver, turned power back on. Tested new receiver and it worked perfectly fine. Turned the fan off. 1 1/2 weeks later we were getting the room ready for a guest and we went to turn the fan back on. DEAD AS A DOOR NAIL. Turned the power off, unwired the receiver and removed it. Wired the fan back up without the receiver. Turned the power back on and the fan worked perfectly fine, again. No more remote control. Bought a longer chain and told our guests to pull the chain if they wanted the fan to run. There is something seriously wrong with the electronic design of these receivers. I would not recommend this system to anyone.
Customer
2025-04-25 17:57:47
Works same like original unit . Good price , if you have some experience is easy to install
Mike Buttaccio
2025-04-06 13:46:16
Works great, and easy to install
LUIS GARCIA
2025-03-19 16:32:54
LLEGARON LAS REFACCIONES, SE INSTALARON Y FUNCIONARON ADECUADAMENTE !!
Savvy buyer
2025-03-04 15:43:37
UPDATED:I carefully installed this replacement unit in an existing fan/light, wired through a direct wall switch as required (no dimmer). I ensured that all requirements were met, and that the fan and bulb were operational and were well within the load specs, new battery in the remote, DIP switches set in both the remote and the receiver / controller, etc. I powered it back up, and the light and fan both worked fine via the remote. All good.Later that same day the receiver seems to have failed. The red light blinks on the remote when the buttons are pushed, but nothing happens at the fan/light end. I doubled checked the wiring connections to ensure that nothing had come loose - all was good. Pretty clear that the receiver / controller has failed, and very prematurely. Pretty disappointing after the repeated ladder work to install, and then to troubleshoot.The product installation sheet refers to a one year warranty / free one month replacement (non-human damage), which is a bit confusing. I reached out to the CeilingFanService email provided on the installation sheet. A week later I got an email response requesting proof of purchase. I provided that, and in three days later I received a replacement unit (receiver and remote).I have installed the replacement, and it works fine. It was the receiver which failed. So I have a spare remote now, both the original and the replacement remotes were fine.
Barb
2025-02-17 20:27:49
Was a little worried that it wouldn’t work. So happy it did much cheaper then buying a new fan!
Garci
2025-02-03 15:59:10
The media could not be loaded.
Frank
2024-11-13 16:03:15
looks to be original made
Recommended Products
$45.54
$ 19 .99 $19.99