Your cart is empty.
Your cart is empty.Product Description
-
Manual focus
This lens mount adapter is manual so most automatic functions must be adjusted manually
-
Precision engineering
Engineered to fit perfectly for a secure connection and no light leakage
-
Intuitive design
Dots and the Urth logo ensure proper alignment while attaching and locking into place
-
Set your camera to manual
Switch your camera to Manual ("M") or Aperture Priority ("A"). Enable "Release shutter without lens" in the menu, if required. Activate Manual Focus Assist and set your lens to Manual Focus as needed.
-
Attach the adapter to the lens
Align the dot on your lens with the dot on the adapter. Rotate the lens until it securely locks in place. If your adapter has a silver ring at the base of the lens, rotate it until it locks securely.
-
Attach the adapter to the camera body
Attach the adapter to the camera like a lens, aligning the dots if present. Rotate until it locks (the Urth logo will be centered at the top). Hold both the lens and adapter for better grip.
-
Remove the adapter
Press the lens release button and rotate the adapter and lens to remove them. Next, press the adapter's release button (if present) and rotate, or just rotate to remove the adapter from the lens.
-
More lens options
Utilize your existing lens collection across multiple camera bodies, maximizing the use of your gear
-
Compact and lightweight
A compact, lightweight tool perfect for minimizing the gear you need to pack
-
Unlock your creative potential
Explore new creative possibilities by using a diverse range of lenses with your camera
-
Certified B Corporation
Urth is committed to accountability, transparency & continuous improvement
-
Made for life
Urth products are guaranteed for life, as longevity is key to sustainability
-
Every purchase plants 1 tree
Each Urth product funds regeneration projects for a 10x greater positive impact
R. Claypool
2025-09-06 17:59:23
Fit and finish are excellent. Works with my Helios 44-2 (magical lens, by the way).
megan
2025-09-02 10:14:08
Quick arrival, beautiful packaging, and a very high quality product. I bought this to use my old lenses from my Canon Rebel t3 with my Fujifilm X-T3 and save a little money during the transition. WELL... be careful and do your research on your old lenses! I never knew that lenses could have an electronic manual focus, I thought everything was mechanical. Since the adapter doesn't allow any electronics in the lens to function, I had no way of focusing my Canon 50mm f/1.8 EFS lens. Had that have worked, this would be the perfect product for me! Guess I have to save up for some Fuji lenses now :) Highly recommend for someone who has the right lenses, though!
JQ
2025-08-18 17:06:49
I bought the Leica M mount to Fuji X mount URTH adapter but it didn't go on well on my ' M-mount Voigtlander 21mm f3.5 Color-Skopar Aspherical Lens.' Putting the adapter on the lens was very tight and it never clicked into place - so it could fall out of the adapter/camera. This is the 2nd of these types of adapters that doesn't take my M-mount Voigtlander lenses. The other adapter I've tried was a high-end Shoten close-focus adapter (M -> X) from eBay. Will try the Fujifilm made adapter and the very costly voigtlander M mount to fuji x mount adpater on B&H (~$300).
Beaker
2025-08-08 12:43:01
Works amazing with my 135 FD from canon. Sadly dropped the lens same day and broke it HAHA. But the adapter is top notch. Would buy again. Plus with each purchase you get a code to help plant trees. Win win.
JN Harley
2025-06-20 10:33:52
I found the adapter to be of good quality and fitted the camera-lens properlyThe aperture readings on the M42 lens was not centre on the adapter; instead, a bit off to the leftNo tool was supplied to adjust the fit-to-centre ringOther than not centering the screw-mount of the M42
Alan Hart
2025-06-14 17:23:54
This Urth adapter is well made and fits my relatively heavy Zeiss zoom lens and my Fuji XT1 sturdily providing the stabilization I had hoped for. worth the additional cost over less expensive adaptors to get that confidence. Like other third party, this adapter requires manual focus.
cnypop
2025-06-11 15:28:25
Amazon rejected my review instead of looking into the matter. I bought a Canon camera kit. It came with aftermarket lenses. The adapter provided in the kit fit one of the three lenses in the kit. I tried to find an adapter for the wide angle lens to no avail. I did not order the lens shown , but if it worked I certainly would. Right now the wide angle lens is useless and I would advise against buying this kit.
J. Lopes
2025-06-05 13:00:25
Simplistic in design and build quality appears to be good. The only complaint I can think of is the symbols for open and close aperture. Open Aperture and/or Closed Aperture. Using this on an XH1, open or closed, with Auto ISO and Shutter, the camera will properly expose no matter what the manual lens aperture is set at.
Customer
2025-05-04 15:46:58
Looks good, feels good, but so much unneeded grief. It’s almost an impossible fit. And zero help or feedback on website was annoying. You’re on your own, you take the risk. Got it to fit but probably shouldn’t have risked breaking lens.
Max F.
2025-03-23 15:41:15
Got it with open box and some scratches on the body. Really upset. Willing to return.
ElÃas CossÃo
2025-03-12 10:58:37
El producto se nota de buena calidad, el empaque es muy lindo y realmente son económicos. Solamente me gustarÃa que vinieran con tapas para poder ser transportados y no vayan sueltos sin ningún tipo de protección...
Darlene Paziuk
2025-03-07 18:08:25
I have a Fujifilm x-t200 and my mom had a bunch of vintage canon lenses. So I figured why not get the adapter. The lenses and adapter clicked together easily, feels sturdy and great. Once I figured out how to adjust my camera settings, I was able to take pictures. If you are also struggling with this, I recommend checking out the company website. I clicked on the adapter I purchased and they had instructions on how to set your camera so that you can use these vintage lenses.
Milo
2025-01-05 15:09:56
J'ai récemment acheté la bague d'adaptation Urth pour mon appareil photo et j'ai été agréablement surpris par son design sombre et élégant. La bague est fabriquée en métal solide et a une finition noire mate qui lui donne un aspect professionnel.Cependant, en ce qui concerne les fonctionnalités de la bague d'adaptation, j'ai rencontré des limites. Bien que la bague permette d'utiliser des objectifs plus anciens sur des appareils photo plus récents, elle ne permet pas la mise au point automatique, ce qui peut être un inconvénient pour certains utilisateurs.Dans l'ensemble, je dirais que la bague d'adaptation Urth a un design sombre et élégant, mais avec des limites fonctionnelles. Si vous êtes prêt à accepter ces limites et que vous cherchez une solution abordable pour utiliser des objectifs plus anciens sur votre appareil photo, cette bague d'adaptation peut être une option intéressante à considérer.
Recommended Products