Your cart is empty.
Your cart is empty.Product Description
Carbide End Mill Engraving Bits
Made from ultra-fine grain carbide material for precise and easy experience, high hardness, good toughness, wear resistance, high strength, resistance to bending.
Sharp Cutting Edge
Provide good milling and cutting performance to ensure work efficiency. The CNC bits have sharp cutting edge. The surface is clean, neat and no glitches.
Titanium Coating
Titanium coating provides excellent corrosion resistance and improves wear resistance. Suitable for wide ranges of applications. Use vertically and take good control of your CNC speed.
Features
- Can ensure high work efficiency.
- Carbide can run at higher speed than high-speed steel.
- Different engraving end mills are available to meet your needs.
Wide Applications
Wide ranges of materials can be engraved. Suitable for engraving or milling PCB, CNC, printed circuit boards, soft metal, plastics, wood, fiber glass, carbon fiber.
Use on milling and engraving machines. Suitable Lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. It can help to extend the service life of tools in tapping operations.
Ken McGuffin
2025-07-20 18:22:59
Just received my Uxcell 3mm router bits. I used the first one for an area clearance operation. The corncob type bit ran well with clean cuts and smooth bottom. While I'm just starting with these bits, first impression is very good.
Customer
2025-07-13 14:24:20
CF tube is hell to machine clean. Just 1 did 20 such holes. I am pleased
Dan
2025-06-19 18:25:34
Pro's: Used them on EVA foam to fine line the edges of letters in a logo. They did very well. Left smooth edges on a conventional cut and after a climb cut it was perfectly smooth. Hard to do that with teeth bits, normally that takes a burr bit. Excellent storage case.Cons: It took 10 minutes to figure out how to open that excellent storage case without thinking you'll break it. The two pieces on top open in opposite directions. Pull left and right then separate.
C. Logan
2025-06-06 14:31:51
Bought these to cut fret slots and inlay tasks. I was skeptical of the quality due to the price. The .020 size is perfect for tight slots. I had tried the .023 bit from a different brand and had less than stellar results despite modifying my settings.
Austin A.
2025-06-01 12:56:56
Made it cut aluminum 6061 1mm bit 1.5mm deep. No broken bits.
Michael J. Richards
2025-04-14 13:43:02
snapped in soft aluminum first try, stuck broken bit ruined workpiece
Patricia Peters
2025-04-11 12:33:57
Very good quality bits.I used them for PCB (FR4) milling and, everything worked very well. Happy with this purchase.
Keith Williams
2025-03-27 10:44:59
I bought these to use on my new Genmitsu 4030 CNC router. I use it pretty much only for carbon fiber. I cut out several tail fins for a RC helicopter and they seemed to work well. Haven't broken one yet. Currently cutting at 15in/min and 0.025in depth of cut on 2mm carbon fiber sheets. After around an hour of total cut time I haven't seen any noticeable wear on the bit I installed. Will have to get more carbon to cut before I can do more testing, but the results are good so far. No tearing up the outer layers that I've noticed either.
Chris Greaves
2025-01-14 17:18:07
Good bits do not brake if you cut in layers of 1 mm at a time. I also slow the router down to 50%
M.R.D.G
2024-12-24 10:31:48
I bought the set of 0.3mm bits, hoping to use them for PCB isolation routing/milling. At this high price of approx 4.5 dollars per bit, I was expecting high quality products.Unfortunately, I broke 7 of them, only one managed to drill 0.2mm into the 0.035mm thick copper, but then it broke as soon as it started moving sideways at low feed speed of 50mm/min !!
Alex
2024-12-22 15:55:28
Good for soft wood & plastic but don't try this on allu xD I did & it snap instantlyStill a good product 👌
Recommended Products