Your cart is empty.
Your cart is empty.Product Description
Lathe Accessories
A wide variety of lathe accessories are provided: Ball Knobs, Star Knobs, Knurled Knobs, Lever Handles, Revolving Handles, Hand Wheels and so on. They are universal use and suitable for your lathe machines. Please pay attention to the measurement to make sure it is right for you before ordering.
Handle with Stud
Zinc alloy handle with black finish, and external carbon steel stud with black oxide finish for rust protection.
Adjustable Lever Handle
Just lift the handle of the clamping levers to disengage and rotate freely for quick adjustment.
Sturdy and Durable
Steel parts ensure durability, and offer increased stability and rigidity. Great replacement accessories for your lathe.
Wide Applications
Suitable for using in applications requiring frequent and quick adjustments or working in confined areas, such as lathe machine, machinery, woodworking and industry equipment. Provide comfortable hand grip and easy to install.
LarryC
2025-09-05 15:37:15
Delta's replacement handles are overpriced. These handles worked perfectly to replace the hold down clamp seen in the photo on my ~20 year old Delta mortiser, but they can also replace the adjustable fence handles, though mine have not yet failed.The handles are solid enough and work perfectly. Would buy again.
M. C.
2025-08-24 15:23:59
item as described works great
Joseph Snrub
2025-08-16 16:08:47
The M8x40mm size fits the Peloton seat slide adjuster (the one that slides it front to back, not the one that raises it up and down. Not sure what size that one is)40mm is a little longer than the stock part, but the tiny bit extra it sticks out is fine.Peloton wanted to charge me $26 for this same piece — for just a single one! I paid $16 for two, so I feel like I got a deal.I had to use a screwdriver and hammer to chisel the plastic casing off the old Peloton part. Big pain. This new part seems like the handle is more robust, plus if the handle rotation fails, I can always adjust it with a hex key.See my pic — new part is on the left. Notice it’s slightly longer than the old (destroyed by chisel) Peloton part on the right.
Mike Ragonese
2025-08-09 15:55:04
I used these to replace set screws on my metal lathe, eliminating the need to find and use an Allen wrench and the eventual wearing out of the set screw. Much more convenient. Quality is good!
Tony B.
2025-07-02 13:57:35
These are far more versatile and provide better lockdown power than a standard knob. The ratcheting action allows the longer handle to be positioned out of the way of your work once they're tightened down, while still providing superior leverage and torque. Very pleased.
A. Franke
2025-07-01 15:50:23
The M8x40 is essentially a drop-in replacement for the obsolete, discontinued, and impossible to get "Lock Lever", Part Number 1340166 for the Delta JT360 6" Jointer. The original handles disintegrated and crumbled years ago and I've been using vice grips ever since... until finally I came across this product. and it works perfectly and is very reasonably priced. Plus now I have a backup because it came in a pack of 2.I got the M10x40 to replace the similarly obsolete, discontinued, and no-longer-available "Lock Lever" Part 1340153, but to get this to work, I also had to pick up a 1/2x5/8x1 steel spacer from the home center and carefully cut it down to 1/2-inch in length so it can effectively replace the original part.
KB
2025-06-08 09:19:35
uxcell M8x40mm:This part is high quality and all metal construction. The handle had a very robust powder coating over cast aluminum. I would recommend this brand, hands down! the 40mm was not the correct replacement part for the DELTA 37-190 6" Deluxe Jointer LOCK LEVER, Ref #118, part number 1340166, however, the uxcell M8x60mm WAS a correct replacement.uxcell M8x60mm:The longer uxcell M8x60mm, required a spacer (I used an old junk socket) to replace the LOCK LEVER on the 37-190. The original DELTA part has a spacer integral to the lock lever. I have attached a picture of the uxcell M8x60mm installed with the spacer, and the original delta part beside it. Highly recommend this part for your DELTA and other machine replacement needs.
CD
2025-05-28 17:02:33
The picture with the measurements is a little misleading/hard to interrupt. I bought the `M6 x 32mm` size and the image shows the handle length measured where it attaches to the body, not the center of the bolt. The body is 15mm diameter (a dimension not given), the handle 45mm. This means the handle sticks out closer to 50mm from center, which in my case is 2mm too long to spin easily where I'm using it. Otherwise, it works great.
Peter
2025-05-25 12:02:02
Very Happy Thank You
LarryC
2025-05-22 16:39:53
Delta's replacement handles are overpriced. These handles worked perfectly to replace the hold down clamp seen in the photo on my ~20 year old Delta mortiser, but they can also replace the adjustable fence handles, though mine have not yet failed.The handles are solid enough and work perfectly. Would buy again.
M. C.
2025-05-18 09:56:44
item as described works great
Joseph Snrub
2025-04-22 10:41:53
The M8x40mm size fits the Peloton seat slide adjuster (the one that slides it front to back, not the one that raises it up and down. Not sure what size that one is)40mm is a little longer than the stock part, but the tiny bit extra it sticks out is fine.Peloton wanted to charge me $26 for this same piece — for just a single one! I paid $16 for two, so I feel like I got a deal.I had to use a screwdriver and hammer to chisel the plastic casing off the old Peloton part. Big pain. This new part seems like the handle is more robust, plus if the handle rotation fails, I can always adjust it with a hex key.See my pic — new part is on the left. Notice it’s slightly longer than the old (destroyed by chisel) Peloton part on the right.
Mike Ragonese
2025-03-25 11:27:48
I used these to replace set screws on my metal lathe, eliminating the need to find and use an Allen wrench and the eventual wearing out of the set screw. Much more convenient. Quality is good!
Tony B.
2025-03-08 17:15:53
These are far more versatile and provide better lockdown power than a standard knob. The ratcheting action allows the longer handle to be positioned out of the way of your work once they're tightened down, while still providing superior leverage and torque. Very pleased.
A. Franke
2025-03-03 13:12:21
The M8x40 is essentially a drop-in replacement for the obsolete, discontinued, and impossible to get "Lock Lever", Part Number 1340166 for the Delta JT360 6" Jointer. The original handles disintegrated and crumbled years ago and I've been using vice grips ever since... until finally I came across this product. and it works perfectly and is very reasonably priced. Plus now I have a backup because it came in a pack of 2.I got the M10x40 to replace the similarly obsolete, discontinued, and no-longer-available "Lock Lever" Part 1340153, but to get this to work, I also had to pick up a 1/2x5/8x1 steel spacer from the home center and carefully cut it down to 1/2-inch in length so it can effectively replace the original part.
KB
2025-02-27 17:30:57
uxcell M8x40mm:This part is high quality and all metal construction. The handle had a very robust powder coating over cast aluminum. I would recommend this brand, hands down! the 40mm was not the correct replacement part for the DELTA 37-190 6" Deluxe Jointer LOCK LEVER, Ref #118, part number 1340166, however, the uxcell M8x60mm WAS a correct replacement.uxcell M8x60mm:The longer uxcell M8x60mm, required a spacer (I used an old junk socket) to replace the LOCK LEVER on the 37-190. The original DELTA part has a spacer integral to the lock lever. I have attached a picture of the uxcell M8x60mm installed with the spacer, and the original delta part beside it. Highly recommend this part for your DELTA and other machine replacement needs.
CD
2025-02-23 14:44:02
The picture with the measurements is a little misleading/hard to interrupt. I bought the `M6 x 32mm` size and the image shows the handle length measured where it attaches to the body, not the center of the bolt. The body is 15mm diameter (a dimension not given), the handle 45mm. This means the handle sticks out closer to 50mm from center, which in my case is 2mm too long to spin easily where I'm using it. Otherwise, it works great.
Peter
2024-12-31 10:36:41
Very Happy Thank You
Recommended Products