Your cart is empty.
Your cart is empty.Product Description
Parameters:
- Frequency: 60Hz
- Rated Current: 8A
- Maximum Input Current: 15A
- Input Voltage: AC 100V-120V
- Inductive Load: 1000W max
- Resistive Load: 2000W max
- Ultimate Power: 4000W
Regulation Mode: Three Gear
- Black Low Speed Gear: 0~40%
- Green Medium Speed Gear: 41~80%
- Red High Speed Gear: 81~100%
- Suitable for US standard A plugs and B plugs
Reminder:
- The speed controller can only be used for AC power
- It will generate heat during operation, please use it in a safe and ventilated place When the machine is empty, if you want to measure the correct voltage, you must connect a load of more than 20 watts
Voltage LED Display Screen
- High Precision Display
- Control accuracy can reach 1 volt
- Accurately understand the working voltage of the machine
- LED light makes the real-time voltage number clearer
Overload and Overvoltage Protection
- An independent protection switch overload and short circuit protection function
- When the instantaneous current exceeds 15A, the switch will automatically power off You can also judge the working status of the switch through the indicator light
Back Hook Design
- More convenient to carry More convenient to use
- Plug and play & Simple and practical
- We specially designed a hook on the back of the governor, through which you can hang the governor on the tool bag of the tool kit
The speed controller can regulate speed, temperature, voltage and light
- Suitable for US standard A and B plugs
- Widely used in exhaust fans, tungsten filament bulbs, electric furnaces, angle grinders, marble machines, blowers
- Not used in electrical appliances with circuit boards and capacitance electronic components, such as microwave ovens, induction cookers, rice cookers,
water pump, washing machines, LED energy-saving lights, Timer, digital display screen, etc
- Not for inductive transformers and soft start voltage regulators
Uncle Tom
2025-08-28 18:58:01
Works great on a fan I installed in the back wall of my work shop
Grandpa's Greenhouse
2025-08-22 10:06:44
Works great!Running a 1 hp water transfer pump with it.No issues thus far 👌.ThanksGrandpa's Greenhouse
Lupe Navarrete
2025-07-30 14:05:16
Did well in performing needs to do specific jobEasy to use
Customer
2025-07-03 15:58:53
Works great and worthwhile for speed control.
JanetL
2025-06-23 17:32:22
I’ve purchased three of these. One was DOA - Amazon replaced it promptly. The other two function and are nice at the surface level, both after extened multi hour continuous use end up overheating. They trip an internal circuit and turn off. They function again once cooled. Met: if you are using intermittently or for short periods they work just fine. But for extended use under load they have hearing problems.
Centurion
2025-05-24 16:46:54
Pros: This is a very nice addition to the home workshop, enabling variable speed control to most power tools. I use this device to slow down my bench grinder and my wire wheel, when their native speed is too high for some applications. The controller is able to support up to 15 amps, which is adequate for most home use. To allow a motor to overcome starting inertia, it is best to set the dial on the controller to full voltage, then switch on, and gradually reduce power as needed.The included power protection circuit is also a nice way to avoid burning the device out if accidentally used for a 20 amp motor.Cons: The device is a little lightweight. I owned a similar device which only would operate motors up to 8 amps, so it was limited, but the heft of the device was more substantial.
Wine Maker
2025-05-02 13:30:47
Helps take the air out of the cement molds
ed
2025-02-17 18:36:10
worked good
wind 2
2025-01-23 17:21:44
speed level 7 shows 70 voltinstead of 110v or higherhighest speed goes up level 3 onlydon't waste your money
Recommended Products