Your cart is empty.
Your cart is empty.Product Description
Welcome To Visionis
The Visionis 7000 is a standard sized push to exit button. Being one of the most popular exit buttons, it can be used in residential, commerical and industrial areas for all different types of applications. With the illuminated back light and stainless steel plate, it gives the exit button that much more of a presence and professional look. This exit button is for indoor use and can be used for multiple access control applications and DIY projects.
Attention: This exit button is meant for indoor use. This exit button does not have a built-in delay.
Before purchasing, it is recommended that the customer checks with their local fire authority to see if there is any additional product they may need in order to comply with the local fire codes. We are not responsible for the improper installation of our product(s) or any type of fees that can be incurred by not complying with your local fire authority.
We recommend that at the time of install, you set everything up on a work bench to make sure everything is ready to go before. These products and their user-friendly design will have you secured and protected very soon!
Know The Details
- Stainless-steel face-plate
- “PUSH TO EXIT” & “PRESIONE PARA SALIR” inserts included
- Fits into standard single-gang box,Large square green color push button.
- 12-inch, AWG 18 wire leads
- Degree of Protection: IP-40
- LED: Yes
- LED Life: 20.000hours
- Switch Material: Plastic
- Switch Plate Material: Stainless Steel
Wiring Example #1
Wiring Example #2
Sarah GG
2025-08-27 15:07:52
Works great I like these exit switches. Options for light up, normally open or normally Closed. Looks to be quality made as well.
Seanski Records
2025-08-16 13:54:43
Used w access system. Worked well
Old Guy
2025-07-31 10:04:49
Bought this to replace a cheaper switch that somebody requested a bit too hard! Metal plate, good quality switch. Fit right and looks good.
fireman
2025-07-19 14:51:18
works great
Rapid Response Elec.
2025-07-14 20:59:43
Buttons work great. Nice illumination and very durable construction.
J C
2025-06-28 11:55:53
Very high quality Push to Exit button. Its a little thick, so it will need to be mounted in a deep single gang box or a low voltage ring with some wall space behind, the connections are spade terminals and you can reduce the depth a bit by replacing the 2 light power wires with right angle terminals
Adamo
2025-05-11 14:17:28
The button came with poor instructions from the start. According to the instructions the LED light was supposed to be connected to 110v and the door controlls to low voltage.When I connected the LED light wires to the AC circuit it made a flash and the light died.Either the instructions are not correct and the LED light is powered by low voltage or the product does not last beyond the first two seconds of use.
Theresa Ivancik
2024-11-27 17:44:15
Works perfect with our brivo door system for our 24/7 gym
Recommended Products