Your cart is empty.
Your cart is empty.Product Description
Package Includes:
3x Deluxe Soft Shutter Release Button (3x Silicon O-Ring Included)
Camera Compatibility:
- compatible with Fujifilm: X-T5 / X-T4 / X-T30 / X-T3 / X-T2 / X-T30 / X-T30II / X-T20 / X-T10 / X-PRO3 / X-PRO2 / X-PRO1 / X100V / X100F / X100T / X100S / X100 / X30 / X20 / X10 / X-E4 / X-E3 / X-E2S / X-E2 / X-E1 / STX-2
- compatible with Leica: Q3 / M10 / M9 / M8 / M8.2 / M7 / M6 / M3 / M2 / M1 / M-E / M-P / M9-P / M-A / M-Monochrom / M Type 240
- compatible with Canon: New F-1 / F-1 / AE-1 (FD mount)
- compatible with Nikon: Df / M2 / F3
- compatible with Sony: DSC-RX1R II / DSC-RX10 IV / DSC-RX10 III / DSC-RX10 II / DSC-RX10
- compatible with other Brands: Minolta XD7 / Minolta SR-7 / Rollei (LM mount) / Olympus OM-1 / Hassellad 503CW
Ergonomics & Wide Compatibility
- Concave surface Camera shutter button, offering comfortable feel when shooting, and it fits the arc of your finger;
- Fits Most cameras with tapered thread.
Stable Installation
- Silicon O-ring make it firmly stand at your X series cameras;
- Silicon - the higher the elasticity, the better, but rubber will not;
- That's why you choose VKO.
Elegant & Deluxe
- The Knurled design seamlessly integrates with the camera's appearance；
- Baking painting technology made it looks luxurious.
Jarrod Nolan
2025-08-02 13:43:14
This fits all my cameras with the screw type shutter buttons. Case in point, I have this on a couple of old Minoltas and a very old Voigtlander. Looks good and better still, works well!
Megatron
2025-07-27 11:28:48
Make your shutter button larger to make it easier to take pictures. Overall, the button looks nice in that anodized blue and has a comfy fit.
Matt
2025-07-20 18:16:04
I love my Fuji X-T4 and X-T5 cameras, except for a few small details. One of those is the built-in shutter button, which I find to be... just not great. I mean, it's fine, but there's plenty of room for improvement. That's where these come in. They extend out the shutter button a bit, making it easier to press.Overall, these are pretty standard shutter buttons – I get the feeling these are mass manufactured by one company and sold by many other companies on Amazon. They're pretty much the same as others of other brands that I've gotten before.They aren't the easiest thing to attach, but keep messing around with it and you'll get it eventually. It's a good thing these come in a three pack, because they will end up falling off and getting lost at some point.As another reviewer here says, the only thing that might be a downside to these is that they're thicker than some other options out there. Of course that's a personal preference thing. I don't really mind it, though I think next time I will try a thinner one just to see what actual difference it makes.Overall, not a bad buy if they're what you're looking for.EDIT: I had one of these on my camera for only a brief time before it just fell right off. I managed to retrieve the button, but the silicone ring was nowhere to be found. I don't expect these to say on forever, but I do expect a longer time out of them than that. I'm not going to lower my score just yet until I try another one, but I do have my concerns at this point.
LolaPi
2025-07-14 16:46:16
The finish on these is just like the pictures. They screw in as they should and hold well if you use a little clear nail polish on the threads.
TimR
2025-06-29 11:16:19
First off, the description focuses on the solid copper and I made the mistake of assuming that would be obvious on the button. But this button is fully painted (red in my case). So the underlying material is masked. But this also leads to the next problem: The threads are painted over too with relatively thick paint. Given that a shutter thread is already an odd tapered thing, having the threads covered makes threading it in difficult to feel if you're doing it right or perhaps damaging the shutter thread. Lastly, it does not thread in fully. I think this is partly the paint and partly design since they include an o-ring for Fuji applications. But the end result is that it sits too proud of the top and feels dangerous to use. Also note that it rotates the power switch as well which may be good for you (easy access) or annoying (easier to accidentally turn the camera on in a bag etc.
Sandy
2025-04-02 13:34:58
This fit very good and the soft touch ring made it so much better. The button feels and looks great too.
YSC
2024-12-23 09:57:18
Well machined without rough edges. Decent value as priced. The problem with these is that they tend to unthread themselves over time. This one has an o-ring which helps with the issue somewhat. There's also a potential concern that having the shutter button so high with this attachment might stress it more in a soft carrying bag. Other than these caveats, this is a pretty good shutter button for releases with the old style release holes (not many digitals, mostly fuji or retro cameras) in silver body color, an alternative for the more popular red buttons.
Robert Daniels
2024-11-27 11:47:11
I was using 3D printed button on my camera, but once in a while they would just come off. I think it's so light and with the threads being plastic, it tends to come off easily. These fit on there more firmly and feel like I won't lose them. If I do, at least there's some extras that come in the pack. I like the concave feel that these have also, where it's recessed.
Recommended Products