Your cart is empty.
Your cart is empty.Stop noise interference on auto power source feeds. 3 pin plug for Uniden, Cobra, Galaxy and many other radios. 12 Gauge Wire - 6 Feet Long. 20 Amp Noise Filter. Two fuse holders -Positive and Ground. Model Number CBNF3AXX
69Gunner
2025-08-07 12:41:21
got rid of the vehicle noise in my C.B....good stuff...
Margaritian
2025-07-23 12:56:15
My CB power meter barely registers anything with my engine off. With the power directly wired to my fuse box, the meter goes up 3/4 of the way when the engine starts. I installed this noise filter with a cigarette 12V power plug and it still behaves the same. I will try connecting with the noise filter via the fuse box when it gets warmer out.
AMW
2025-06-10 12:56:02
I drive a Volvo VNL truck. The problem is which is the same with all newer trucks is that the truck factory installes the coax cables to short with poor cable and has the power for the cb connected through everything so it's hard to cut all unwanted noise. This noise filter helped very little.
Rob G.
2025-06-07 15:34:28
It doesn’t do anything installed it on my bearcat 980 Ssb ground it to the frame tried ground to battery nothing worked
Gerard B.
2025-05-26 15:43:21
It works surprisingly well. It doesn’t get rid of all the noise, but reduces it to the point where I don’t get aggravated when listening to my CB in my car. I will install this to my battery with an extra fuse and see how that works out. This will help if you can’t wire your CB straight to the battery.
Kim Rhodes
2025-04-01 15:08:39
It did not work very well for me
Derrik Isaac
2025-01-23 18:48:42
Didn't work for me still have fuzz
hiram texidor
2025-01-22 20:43:45
Exploded upon installation. It was installed correctly will not recommended
Recommended Products
