Your cart is empty.
Your cart is empty.Product Description
Setting of Assorted PC Control Software
1. In connecting G106, X5105 and G90, the new-version JTDX software can be directly installed in models G90 and X5105. If the JTDX software is an old-version, model IC- 7000 and serial console baud rate 19200 can be selected.
2. The old-version JTDX has to reply on 0miniRig software for proper connection. OminiRig software settings are as follows: Rig type: IC - 7000 Baud rate: 19200 Port: select the port number virtualized on your computer RTS: LOW DTR: LOW Other options are default and do not need to be modified.
3. The port and baud rate of HRID software are set as above. Other control software of the same type can also be set as above.
1. Xiegu G106 & XPA125B connecting diagram
2. Xiegu G90 connecting diagram
3. Xiegu X5105 connecting diagram
Scott
2025-07-28 17:00:07
Setup was easy. Function was excellent. Got on ft8 in 10 minutes. Took longer to configure the software than to hook it up. I like that I only need 1 usb port instead of 2 like other interfaces. Best bang for the buck for my G90 as all the necessary cables are included. Other brands you have to purchase the cables separately.
Customer
2025-07-02 14:03:50
I used this with the Xiegu G106 and it worked great. It was easy to setup and use. The wire connectors are made in such a way that there is only one place for each to plug in, so installing it was easy.I used this with WSJT-X, which recognized the ports and was easy to setup.
James B. Wilkinson
2025-06-15 17:20:18
I was able to get my G90 sending and receiving FT8 very quickly using the DE-19. It’s about as close to plug-and-play as anything in ham radio… which means it’s harder than using an iPhone, but much easier than, say, programming a Baofeng HT (or a VCR, if you ever attempted that).Maybe there are still cheaper ways to make this happen, but you’ll be stringing together various devices and adapters where the DE-19 comes complete with all the hardware you need.Older modes like RTTY are tougher to get going, but that’s due to the clumsiness of FLRig / FLDigi compared to WSJT-X. I’d definitely recommend getting FT8 going before you move on to other modulation protocols.Nice surprise: my young daughter actually gets a kick out of “helping†with FT8, though I think she’d rather scrape paint than watch me work SSB. Something about the periodicity of it, and the XMIT light clicking on… then you start looking up callsigns on QRZ. You never know what’s going to resonate with a preschooler.
Customer
2025-06-10 18:42:15
Does what it says on the tin. As usual, Xiegu provides a perfectly adequate product.
Tequila
2025-06-03 14:50:03
I got this to work with my G106. It’s simple to set up and use. I travel with mine frequently so being so small and light weight is a plus. Great for working digital modes.
K Joy
2025-05-25 18:21:58
Works perfect with the G106. I had a Signalink laying around and tried to get it to work but I had no transmit audio out with it. Thought there may be something wrong with my G106 but bought the DE-19 and it worked right out of the box.
N. J. Simicich
2025-03-24 15:02:00
So this box is designed specifically to connect a xiegu g90 to a computer so that you can do digital ham radio. It works perfectly.You connect it to the back accessory connector and the ci-v plug on the side of the radio. The de-19 lets you plug one usb plug into your computer.Three devices are surfaced, a "microphone" where you get audio from the radio, a speaker (where you send the audio from your digital programs to the radio) and a serial connection for cat control.Hint: you might not be able to use the radio in G90 mode. There is a timing issue. But telling, for example, wsjt-x that you have an icom 7100, everything works.But you don't need to connect your computer's sound card to anything, you don't need a separate cable for cat control. All the cables you need are included.The downside is that this gadget will only work on xiegu radios.The upside is that it works perfectly. No fiddling. Plug it in. Do your device setup. Select the right sound card, the serial port for cat control, the radio type. And you are up on FT8.
James C. Forslund
2024-12-21 09:47:07
Product notes indicate it will make FT8 ccommunication possible. It does not.
Ralph Donner
2024-12-03 18:41:06
Einfach das DE 19 mit den mitgelieferten Kabeln am Xiegu G-106 und oder am G90 anschließen. Das CIV Kabel muss beim Xiegu G90 am Bedienteil seitlich eingesteckt werden. Nur noch die Einstellungen am Computer und der benutzten Software vornehmen und dann Spaß mit FT8, FT4 usw. haben.
Recommended Products
$131.33
$ 62 .99 $62.99