Shopping Cart

Your cart is empty.

Your cart is empty.

XtremepowerUS V-Type 55CC 2 Stroke Gas Post Hole Digger One Man Auger EPA Machine Plant Soil Digging Fence,red

Free shipping on orders over $29.99

$149.95

$ 69 .99 $69.99

In Stock
  • XtremepowerUS Post Hole Digger gives you plenty of power to efficiently dig and bore through holes for decks, fence posts, tree planting and more
  • Engine Type: Single Cylinder, Air-cooled Gasoline Engine; Engine Displacement: 55CC; Engine Cycles: 2 Cycle; Horsepower: 2.3
  • Post hole diggers are made adaptable with most standard auger bits with shaft size of 3/4-inch
  • Engineered with a manual recoil start easy fuel delivery system that allows for a quick-pull start action and the built-in translucent fuel tank lets you easily keep track of the proper fuel level
  • Easy-to-grip finger throttle and switch control on handlebar for enhanced user power and speed control at your fingertips.



Product Description

1

Lightweight and Easy-to-Use!

Product Description

The XtremepowerUS Post Hole Digger gives you plenty of power to efficiently dig and bore through holes for decks, fence posts, tree planting and more. It features a powerful 2-stroke 55cc gasoline engine enabling drilling of multiple holes in quick succession. Designed to be lightweight and easy-to-use to reduce the working strength of operator to the greatest extent. Engineered with a manual recoil start easy fuel delivery system that allows for a quick-pull start action and the built-in translucent fuel tank lets you easily keep track of the proper fuel level. The ergonomic design incorporates a die-cast metal handlebar construction with easy-to-grip finger throttle control ensuring enhanced power and speed control at your fingertips. Equipped with an 6 in., 8 in., and 12 in. earth auger bits that can speed up to a maximum of 170 RPM to handle the toughest of jobs.

Features

  • Manual start easy T-pull start
  • Built-in translucent fuel tank
  • Ergonomic butterfly handlebars
  • Anti-shock absorption spring
  • Engine Head ONLY
  • Fuel mixing ratio: 50:10
  • No load speed: 2800-3000 RPM
  • EPA Approved (JSHSS.0635GD-001, US EPA, 2018)

Underground Breakthrough Technology

  • Powerful 2-stroke 55cc gasoline engine enables drilling of multiple holes in quick succession
  • Heavy duty die-cast metal auger bit can rip and shred through soft soils and clay like butter
  • Rocky soils and tree roots may slow down excavation, but our post hole digger can handle with ease
  • XtremepowerUS post hole diggers are made adaptable with most standard auger bits with shaft size of 3/4 in.
  • Simply choose the right size and type of auger bit to meet your requirements for the toughest jobs

Parts

0

Auger Head

Wide detachable butterfly handles for convenient transportation and storage of equipment; available in different sizes and types to be purchased separately.

0

Handle and Throttle

Easy-to-grip finger throttle and switch control on handlebar for enhanced user power and speed control at your fingertips.

0

Starting process

On and off switch function with manual recoil easy t-pull start. When using this product, it is recommended to use 2-Cycle 50:1 Pre-Blended Fuel.

0

Auger Bits

The auger digger features 3 die-cast metal auger bits — 6 in., 8 in. and 12 in. that can speed up to 170 RPM; different sizes of auger bits available from 4 in., 6 in., 8 in., 10 in., and 12 in. to meet your needs.


Challenger
2025-09-03 21:42:19
Nice power head economical and easily usable not made for long term use but great for use then dispose of like most products today
Dave M
2025-09-01 17:53:38
Setup went easy, the mixing container for fuel is a nice touch. Started right up in 3 pulls the first time.Biggest problem is the engine case broke on the 5th hole I dug.After dumping the broken pieces out I decided to keep using it and am fsr its working, but I am sure the clock is ticking until a major failure happens. So far, no response from the seller on what they can do to make this right...
Customer
2025-08-08 17:19:27
Allows a complete repair
J. Devine
2025-04-22 15:47:00
This works well, used it to dig 10 3 foot deep holes with an 8 in Auger. Dug down first 2 feet very quickly and then I had to clear all dirt away from hole and out of hole to do the last foot. This is not the one I would want if you do this for a living but if you have the muscle to handle one it is worth getting for the home owner digging multiple holes.
Mark
2025-03-22 18:21:45
This little powerhouse is impressive. I bought this to do a fence repair job hoping it would at least make the job go quicker. I really wasn't expecting much for the price.It starts very easily, is light weight and packs quite the power for a small machine. Seriously though for the price compared to others, I was hoping it would at least make it through the topsoil. Not only did it quickly chew through that, it took care of most of the shale rock beneath the soil.I'm very impressed with this little power house. I can hardly believe the value. Great for a home owner who occasionally needs to loosen soil.The only improvement I would have liked to see is a wider handle configuration for more leverage.
Clay O.
2025-03-10 12:26:30
Like another review mentioned, it starts right up if you ignore the instructions that came with it… Both the manual and the stickers on the side of the machine are wrong. Runs good when you know how to start it. Pump the primer bulb 5 - 8 times, pull with the choke on about 5 quick times. Turn off the coke, pull and it’ll start in a few pulls. Note, that it will not start if the choke is on, ever, but you need those first warm up pulls.3/4 is not a standard shaft size if you are thinking of using this for ice fishing. 3/4 might be more common in the ground digging category, but the ice fishing bits out there are mostly 7/8s. There is one brand I came across that has 3/4 bits, ION. But ION is ridiculously more expensive than the other brands out there. Like, excessively so. Completely defeating the purpose of saving money on buying a budget powerhead.The ice auger bit Xtreme offers doesn’t appear to be purchasable at the time I ordered this. 404 not found Amazon dog page error clicking on its link.I paired this with my Eskimo hand auger bit, which of course also isn’t 3/4…. It’s 11/16ths. But I went to Lowes and got a 3/4” galvanized pipe, a 5/8” galvanized pipe, and some adapters to connect them together. 5/8” was close enough for the 11/16ths bit. Some drilling and bolts for pins later I’m off to the races.All in all, nice little motor… But if you’re using it for ice fishing you’re going to be doing some DIYing to make it work for you.
TNO
2025-02-19 11:36:49
I ordered this unit because my old cheap china one finally gave up the ghost . We are in the process of putting up another fence line and building a barn so I needed something that could handle a 4,10,12 inch bit with no problem. This will definitely do that and then some. I’ve read some of the other reviews on here about this company sending different head units when you order this item so I was skeptical but I did receive the extreme power head unit. I will say that you think that your ready for this thing and it will surprise the heck out of you. It’s a beast and you had better hold on cos you are gonna need to. Very strong and so far great unit.
Jonathan Brown
2025-01-15 14:23:00
The media could not be loaded.
Recommended Products

$140.31

$ 66 .99 $66.99

4.4
Select Option