Your cart is empty.
Your cart is empty.Great for combined plunge-cutting and pattern/ template routing. Extra long Cutter for multiple or extra-thick stock. For increased work piece visibility, use the top bearing flush trim Bit in a handheld router allowing the template to be positioned on top of the work piece. In a router table, template will be positioned underneath the work piece. Can be used without the bearing as a standard straight bit. Two flute carbide cutters with enclosed ball bearing. 1/2" Shank.
todd messick
2025-09-04 16:03:36
Seems quality us very good. Does great job trimmimg
Jonathan Dowling
2025-09-02 10:00:39
Took a chance on an off brand. I even bought a more familiar brand along with this one just in case, but I didn’t need it! It is performing exactly as it should
Dude USA
2025-08-20 18:30:37
I wouldn’t use this on hard wood and expect it to last long. It’s not the highest quality. But it works great and I had no issues on my soft woods and MDF. But it dulls easy in hard wood.
Jim M
2025-08-05 10:11:21
Quality bit, great delivery!
Customer
2025-07-13 16:44:45
It accomplished the trimming with great accuracy. A good investment
SilverBuzz
2025-03-30 19:36:22
This cut was on MDF-3/4" with laminate on a test piece that was less than a foot long on the 2nd pass. It cut well, but the paint chipped right away. I have to cut 42" inches twice for a new router custom tabletop. I know it will cut those okay. The metal seems to hold but the cheap paint definitely does not. For the price I believe this still has value for occasional cuts and DIY'ers but not for professional woodworking. I would find something else like Amana or Freud bits for multiple routing. For my purpose this test bit will be fine for now!
R Peterson
2025-03-29 16:57:29
Yonico has done it again - this bit worked perfectly for the job I bought it for - trimming the edge of a curved Brazilian cherry stage in my home theater with a curved pattern clamped on top. I don't know how they make this high-a-quality bit for the price. This particular bit is enormous, and compared to the Freud bits at Home Depot would cost at least $40. I've bought several other Yonico bits (including a large set of like 70 1/2" shank bits), and I've been absolutely thrilled with all of them. I'm not a professional woodworker, however I have two serious router tables with lifts in my shop and I've passed hundreds of feet of material through these bits without any issue. You aren't going wrong with this brand.
no buddy
2025-03-20 14:41:06
Really pleased with this little bit. I had a project to clean up and profile the edge of a reclaimed maple bowling alley that was around 2-2.5" thick. After going over the areas with magnets and digging out hidden nails, this bit was a champ at cleaning up the edge. I did hit something and damage the blade (two small divets in blade), but I'm not sure what it was, maybe a hunk of old epoxy glue or who knows?I forgot to take a pic between bits so the one included here is after I followed up with a 1/4" rounded profile on top and bottom.I would definitely recommend this bit and would buy it again.
Isidro-Ginés Morales Camacho
2025-03-14 10:36:59
Cumple mis expectativas y es de muy buena calidad.
ALBERTO
2025-02-21 11:48:59
Gambo da 1/4"avete bisogno di un Adattatore per mandrino di fresatura 6.35 lo consiglio un ottimo prodotto,Si è comportato beneConsegna sempre nei tempi previsti da amazon, impeccabile!
alessandro f
2025-02-17 12:33:19
Quando l ho acquistata pensavo mi arrivasse una fresa giocattolo, mal lavorata, approssimativa, la classica "cineseria" pagata poco.E invece.. Un prodotto made in USA, solido, tagliente, precisoEccellente
Eric lebeau
2025-01-28 18:26:26
I bought this as a more affordable alternative to freud or other high end bits. Basically to try out bit types and see if they work for me. I've heard nothing but good about Yonico. But don't expect a premium bit. But at this price point i don't believe they can be beat.Will reevaluate after having used it long enough to get an idea of longevity. If they last reasonnably well i do believe they will become my go to bit for all but a few favorite specific bits.Edit: after having used the bit awhile i am quite satisfied.Excellent cuts, smooth finishStableSeems long lastingThe coating helps easily cleaning up any residu on the bit, the gunk comes off easily which helps prevent buildup which in turn helps maintain accuracy and no lag. I like keeping my tools clean.Yonico will from now on be a constant in my kit.
John Ambler
2025-01-11 17:21:43
Did a great job but have to be careful when using in hand held router as quite a large blade which is quite aggressive. Need to use with care and make small passes otherwise it will dig in and make a mess. I practiced on some scrap wood first which I would highly recommend for amateurs like me!
Recommended Products
$51.18
$ 24 .99 $24.99
$36.15
$ 17 .99 $17.99