Your cart is empty.
Your cart is empty.Product Description
Universal ceiling fan remote controls kit, UL listed, FCC ID approved
- Upgrade the traditional ceiling fan to remote controllable one.
- Compatible with most of ceiling fan lights with AC motor. Not suitable for DC motors.
- Compatible with most downrod style fans, not recommended for use with hugger style fans.
- Please note that the remote will only works with the receiver included in the package.
- Quiet. When you press any key in the remote, the kit is quiet without the beeping sound like other brands.
- Fan motor and light kits are controlled individually.
- Fan control: 3 fan speeds-High/Medium/Low/OFF
- Light control: light ON/OFF and Dimming
Key Parameters
- Input voltage: AC 120V, 60Hz
- Max power for fan: 120W / 120V / 1Amp
- Max power for light: 100W
- Wireless transmission: RF 304MHz
- Remote distance: 30m in open air
- Battery: 2XAAA battery (not included)
Packaging
- 1x Ceiling Fan Remote, 1x Ceiling Fan Receiver
- 5x Wire nuts, 1x User Manual, 1x Wall Mount, 2x Screws
Light dimmer
- Short press the green button to ON/OFF the light
- Press and hold the button to change the brightness
- Compatible with all incandescent light bulbs
- Compatible with some dimmable LED bulbs and dimmable CFLs, but not all
- Do not use the dimming function if the LED and CFLs are non-dimmable, as dimming can cause flickering or damage, they can only be turned on and off, not dimmed.
How to use
- Set the 4 dip pin codes before installation.
- Set the same pin codes on transmitter and receiver.
- Default setting is 0000 (0 is OFF, 1 is ON) which is not recommended.
- If you have multiple ceiling fans in your home, please make sure that the PIN codes settings are different between fans.
- If you want to use 1 remote to control multi-fans, or use multi-remotes to control 1 fan, just set the same pin codes on remotes and receivers.
- There are 16 different combinations, choose any of them - 0000 (not recommended)
Battery type: AAA
- 2 pcs AAA batteries, not 9V battery.
- The batteries are not included.
ergonomically designed
- Upgraded remote.
- The remote is ergonomically designed for comfort
ultra-thin receiver
- Compact design.
- ultra-thin receiver, easy to install.
Cautions
- Installed by a qualified electrician.
- Please make sure there is enough space in the fan canopy to fit the receiver before order.
- If your fan is old version, and has PULL CHAINS, in order to get correct speeds and function, please turn PULL CHAINS to max speed position and turn light on (if any),
What can we do?
- Upgrade the traditional ceiling fan to remote controllable one
Does it works with the fan which have no light kits?
- Yes, the light and fan are controlled individually. Just hang up the blue wire (live wire for light)
I have 2 ceiling fans in adjacent rooms. If I buy 2 of these remote controls, will they interfere with each other?
- Set different pin codes on each kit ( remote and receiver), the fans will be controlled individually.
Can i use 1 remote to control 2 fans ?
- Yes, set the same pin codes on 1 remote and 2 receivers, 1 remote will control 2 fans.
Susan
2025-09-03 11:56:57
We bought a house that had a ceiling fan with remote control, but the former owners took the remote. I tried buying just the remote and reprogramming it, but didn’t work. I bought this and replaced the remote and receiver box and worked perfectly. Super easy to install and worked great:
Robert
2025-08-26 11:54:59
My Fanimation receiver went out and they wanted way too much for a replacement. I decided to give this a try. Design of the receiver was basically the same so installation was an easy switch out. It works just like it should. I am also using it with Bond Home so I can make it work with my phone.The remote is a little larger then I would like and also the holder for the wall isn't as tight as I would want. Not going to deduct a point for that but something to keep in mind. Uses 2 AAA batteries vs a 9V battery I saw another one on here use. I chose this one for the AAA.Overall a good replacement receiver if you need one. Cheaper then buying from the manufacturer and a lot cheaper then just buying a new fan.
Emerson
2025-07-11 13:55:13
I have this HD fan that the receiver fried and burned out the fan light and stopped sending power to the light. The fan worked.Tried to get a replacement from the manufacturer (under warranty) and they "weren't in stock." HD was of zero help as well. I ordered this one after checking the sizes against the original. I also replaced the halogen bulb with an LED round light.Everything works great and going strong for several weeks.Did not try the Alexa integration so I can't report on that.
JackJ
2025-07-04 20:37:34
The control unit would not fit in the electrical box. I taped it to the ceiling with 2 sided tape. I doesn't look good, but it work great and that what matters to me. Once I gave up trying to make the control box fit, it install was easy.
MM
2025-07-02 12:01:53
I bought two units to replace old sets. The module is smaller, making it easy to fit inside a canopy. Remote is modern looking, very nice. One of my fans works well with LEDs bulbs. My second fan however did not work. The canopy is very thick and was blocking the radio signal. Could only operate it from 2-3 ft away. I ended up getting different kit with stronger radio. If your fan is “heavy duty†model, this kit is not for you. Otherwise it is a great product. Giving 5 stars.
chelsey merklinger
2025-06-26 09:20:06
The devise was easy to install even for a novice and works wonderful.
RoDyne
2025-05-04 11:13:04
Replaced defective 10 year old Hunter light and speed controller as if it was the original. Worked without any issues.
Barney
2025-05-02 10:54:35
Easy to install, works great with an old fan. Holding up and performing well.
H. Quiroga
2025-04-09 15:55:42
Muy útil
ROBERTO JIMENEZ
2025-02-20 14:54:47
El ensamble es bueno y funciona perfecto
Recommended Products