Your cart is empty.
Your cart is empty.Product Description
It can connect all kinds of serial devices. Such as computer and tax control machine, digital camera, PLC, PDA, MODEM, set-top box, barcode machine, industrial instrumentation and other equipment for communication.
Key Features
SOLDERLESS: No Welding Required
128 type copper terminal design, no need for soldering iron and cumbersome tools, easy wiring. The housing is designed with a folding buckle for easy assembly and disassembly without tools.
Pure Copper Plated Joints
Pure copper plated joints, fine solder joints, resistance to plug, and good contact to ensure high-quality, durability and a long life. The outer casing is made of PP engineering material, which is soft and durable.
REDUCE ERRORS
All signal ports are clearly named and labeled on both sides of the board for quick wiring.
4 different sizes of tail pipe
Equipped with 4 different sizes of tail pipe, the material is soft and resistant to bending. Make sure that the pulling and sway of the cable does not affect the internal wiring during use.
Folding snap-on housing
The shell adopts folding snap type, PP material, which can be repeatedly folded and used multiple times to improve assembly efficiency
Package Includes
10 x DB9 Female Solderless Connectors
10x cable pressing plate
20x Screws
20x Long bolts
10x 5mm tail pipe
10x 6mm tail pipe
10x 7.5mm tail pipe
10x 8.5mm tail pipe
Usage Method
Step 1
Release the terminal
Step 2
Core wire peeling(about 3mm), Place the core wire in the hole and tighten
Step 3
Press the cable with a crimp
Step 4
Check wiring and cover the casing
CBiggs Opinion
2025-09-03 12:06:08
It was very easy to put together and was very sturdy.
t3d
2025-07-02 14:16:04
These connectors make if very easy to wire up and later change configurations of the wiring. They work well for my application. The screw terminals make them a little larger so if you have small spaces you need to plug into you may need to take that into consideration, but they are easy to use and eliminate the need to solder or de-solder if you make a mistake with wiring.
Ishop Ere
2025-06-24 14:49:42
This works well. Screws a little soft but have been able to reuse these without trouble. Bulkier than a crimped or soldered connector but very low hastle
JIN
2025-06-22 12:14:39
They are really practical
slomobile
2025-05-08 16:11:32
The pin numbers and GND silkscreen on the board were very helpful keeping track of which wire goes where. In my application Roboteq HDC-2460 motor controller I was unable to use the 25 pin and 9 pin connectors side by side with the shells on due to the narrow spacing between connectors. I was able to use them by removing both backshells.
nope
2025-03-08 17:01:50
I love these breakouts. They're really well made. I had no issues with torqueing anything down. In the past, I've dealt with stripped, cross threaded screws on things like this but no problems here. I also like that they come with various sizes of bushings/clamps to accommodate different #'s and thicknesses of wires.
Customer
2025-01-02 14:30:37
Used for intended purpose and it worked well
Adam V Steele
2024-11-12 10:00:04
I have used a bunch of these and they are all fine. Easy to assemble. They smell pretty bad though coming out of the packaging.
Recommended Products