Your cart is empty.
Your cart is empty.Product Description
Made of plastic,corrosion resistance
Adjustable design and with standard and connect tube fittings, gaskets to eliminate leakage
No power or pump required,suitable for low pressure gravity feeding systems
Side Floating
Specification:
Material: Plastic
Thread diameter: 15.5mm
Total length: 140mm
Float Ball Size: 72*45mm
Package Included:
2x float ball attached to adjustable valve shutoff arm
2x 1/4" Quick Connect Push in to Connect Tube Fittings
Water Level Control, Automatic Cut Off
1.Plastic float valve automatically start and stop water flow.
2.The float is adjustable to allow you to control the water height. It is used for horizontal mount.
3.Tank mount with extended threads on inlet side of valve for mounting through tank wall.
Working Principle
When the water level of the water tank is low, the gate of the float valve opens to ensure that water can enter; when the water level rises, the ball of the water float valve and the adjustable arm will form a flat angle and close in this state, realizing the automatic adjustment of high water level and low water level.
KPR
2025-09-03 15:28:45
with a redo, I saw my aquarium sump was riding deeper than desired, enough that the bottom tray of the flow tower was partially flooded. I could also hear the RODI unit that feeds it going on and off a lot.I swapped float balls with an old one, it was worse, and had a copper fitting that would get doused, not really good for the fish, worse if it had been a marine tank.So I got these, 1st one works perfectly, its in a large sump, with good water flow, bu doesn't bob higher than set, the water level is stable, (I waited a few weeks before reviewing).The feed is off a RODI that intake water pressure is around 70psi, I imagine its near the same by the time the water is pushed through to the tank.As long as you cut your tubing with a straight end, so it can fully seat, the unit is solid.
deck
2025-09-01 14:57:24
Zero issues so far. No leaks. Smaller in size than the rest making it easy to work with. Adjustment is a little stiff, but you get used to it.
john edwards
2025-07-29 14:39:25
Worked good for this reservoir tank I made for a home project. output varies allot with float position.
Keila Alves
2025-07-24 12:10:02
Perfect for what I needed. Quality and good price…
potomaccadio
2025-07-22 14:30:18
Great float valve! Never need to fill my coffee maker up with water again. Also works great with our birdbath.
tIM
2025-06-04 15:45:56
Easy to adjust. First I though the fittings were weird but now I see how cool..
Jose
2025-04-29 15:34:53
Installed in a coffee brewer water tank to make it self filling. Install was easy and unit worked as intended.
David Schlosser
2025-04-24 16:12:13
Pay particular attention to how this must be mounted to function, it only works when mounted to the side of a tank and will not work properly if mounted to lid of any kind.
ik-hee
2025-04-17 16:10:27
works well
Ron
2025-04-10 12:03:01
With a test run and the ability to assemble with out instructions. No problem. The reservoir determines how many days.
Sythe
2025-03-30 10:34:18
I have several buckets I use for RO/DI water so I 3D printed some brackets for these to make them portable. The water just dripples out of the area where the float attaches but other than that they shut off the water just fine.
Anastacia Balsdon
2025-02-06 13:23:20
They work great I’m using them on a gravity fed automatic top up /auto water change system for my saltwater aquarium. They use normal 1/4 rodi hose and come with the rubber washers.great buy,great price and are adjustable
Steven Thomas Boyd
2025-01-04 18:29:04
I'm using these in my hydroponic tanks to maintain fluid levels. Pleasantly surprised with the units. Simple to install (make sure you have them oriented properly or you'll have a flood - ask me how I know). The adjustment linkage is stiffer than you would expect but it will fold without breaking.
Recommended Products