Shopping Cart

Your cart is empty.

Your cart is empty.

22930 3/8' Low Profile Disconnect Tool, Oil Fuel Line Disconnect Tool Compatible with 3/8 Inch Fitting Found on Oil Cooler Lines for Transmissions, Radiators and Other Applications

4.7 (5) Write Review
Free shipping on orders over $29.99

$18.89

$ 9 .99 $9.99

In Stock
  • 【Useful Functions】: By using this quick-connect tool, you can disconnect the oil fuel line without removing the clamps. It has gears that perfectly match the tight tolerances of the connector, with a good fit that allows the line to be pulled when rotated without damaging the connector or retaining clip.
  • 【Reliable Material】: This product is made of brass, which has high strength and toughness, so it can resist impact and is not easy to break or deform. It is wear-resistant, corrosion-resistant, rust-resistant and can be used for a long time.
  • 【Lightweight & Compact】: Weighing only 22 grams and with a diameter of 0.98 inches, this disconnecting tool is very portable and compact. Therefore, it is easy to carry and store without taking up too much space. You can keep it in your toolbox for emergencies.
  • 【How to Install】: This tool has a quick installation. Step 1, place the tool on the hose. Step 2, close the tool opening to clamp the hose. Step 3, push the tool towards the connector. Step 4, pull the line and remove the connector.
  • 【Universal Fit】: This quick-connect disconnect tool fits most motorcycles, automobiles or boats, and is commonly used in transmissions, radiators and other applications. It is compatible with a variety of oil cooler lines, transmission lines, trans cooler lines and radiator line accessories with 3/8" fittings.


Specification:

Material: Brass

Quantity: 1 PCS

Color: Golden

Weight: 22 g

Diameter: 0.98 inches

Feature: Practical, Durable, Portable

Fit Type: Universal Fit

More information:

-It can improve your vehicle maintenance efficiency.

-It is able to be reused.

-It only fits 3/8 inch fitting, please check the size before ordering.


Richard J.
2025-09-04 14:14:44
this item come apart when taking it out of the bag .this is a no no
kevin r.
2025-08-31 15:22:30
Did not fit. Very loose on the tube, lots of clearance on the tube, not snug. Would not engage in the fitting, diameter too large. Ground down the outside diameter and got it into the fitting and it did work. Design is good, the quality of the tool is bad. Might as well just use a pick to remove the clip and reinstall after removing the line.
Customer
2025-06-25 10:13:21
This is better than nothing but is hard to work if you have the space a small pike works better
David cadena
2025-06-11 16:34:09
It did not fit I actually had to file down the tool to make it fit ,the diameter was to.large and would not fit into the connector.i made it work...
No Name
2025-02-19 19:40:05
Could not get it in far enough to engage the clip claws. Wasted my money and time.