Shopping Cart

Your cart is empty.

Your cart is empty.

4/0 Gauge 4/0 AWG 10 Feet Black + 10 Feet Red Welding Battery Pure Copper Flexible Cable Wire - Car, Inverter, RV, Solar

Free shipping on orders over $29.99

$157.92

$ 68 .99 $68.99

In Stock

About this item

  • Use selection tabs above to select (1) cable gauge size and (2) cable length and insulation color. Available in 8 Gauge through 4/0 Gauge. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
  • WindyNation Power-Flex Cable is fully annealed PURE copper, flexible (high copper strand count), with a tough, solvent resistant EPDM insulation jacket. REFER TO THE PHOTO GALLERY FOR A DETAILED SPECIFICATION CHART
  • Copper cable is fully annealed per ASTM standards. Complies with SAE J1127.
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F).
  • IEC and RoHS compliant



Product Description

windy nation

pure copper cable
Pure Copper

Premium grade, high strand cable count, pure copper cable manufactured to the highest standards right here in the USA!

  • Finely stranded
  • Pair with WindyNation cable terminals and heat shrink.
  • Perfect for any application requiring a pure copper conductor.

Power-Flex Welding and Battery Cable

Ultra-Flexible

WindyNation's Power-Flex welding and battery cable is a highly flexible industrial grade electrical cable. A high strand cable count combined with a soft, pliable EPDM insulation results in a flexible cable every time. Our cable is resistant to tears, cuts, abrasion, water moisture, and oil based solvents.

Whatever your project may be, WindyNation has the cable for it.

  • 100% Made in the USA.
  • Highly flexible industrial grade electrical cable.
  • Approved for up to 600 volts, -50°C to +105°C (-58°F to +221°F).
  • Rated as dual use for welding or battery installation applications.
  • Available gauge sizes range from 8 gauge to 4/0 gauge.

Wide Range of Uses

STEREO WIRING

off grid

WELDING

BATTERY

Manufactured In The USA

WindyNation's Power-Flex welding and battery cable is manufactured in the USA. Each cable that leaves our warehouse is precisely cut on an automated robotic cable processing machine and double checked for quality and accuracy before it is shipped out to our customers.


Paul Jones
2025-08-30 16:42:20
100% copper cable, very flexible and quality sheath. Would highly recommend.
Average Atom
2025-08-15 18:45:42
This cable is much more pliable and easy to work with compared to most others I have worked with. The wire casing is excellent and is easy to strip for lug connectors. The copper wiring is the real deal.. No tin or aluminum alloys detected at all.Works really great for wiring high amperage batteries in parallel, or in series especially.Would buy again
Vic M
2025-08-09 13:49:45
Because the wire is so flexible made it very easy to install. Very nice.
DesignManiac
2025-06-07 18:56:12
Very good wire for solar battery systems.Flexible for easy installation.Reduces voltage drop to about as low as possible between batteries and solar charger or inverter.Recommend use with at least 3/8-inch copper lugs.Insulation is excellent with nice red color to distinguish with black in dark areas.
Adam Bowker
2025-05-26 18:38:24
using this for the battery connections in my van conversion. it’s way more flexible than i expected, more so than the 1/0 i got at lowe’s… this stuff has a bunch of small strands of copper, whereas the other stuff had just a few thick strands.easy to cut with some decent wire cutters and im crimping lugs with a hammer crimper
Wilderness Guy
2025-05-05 15:27:15
I had WindyNation WNI 4/0 cables which required attaching 4/0 sized lugs to the ends in order to bolt the cables to various devices such as connecting 2 batteries in series. I quickly discovered that the smaller wirelets that made up the cable would expand and fray outward once the outer insulation was removed. The lugs provided NO CLEARANCE to make it easier to insert the cable into the lugs before crimping the lugs onto the copper wire. Without fail, strands of the smaller wirelets wouldn't fit into the lug, so these had to be cut off. If I also had to cut the cable, they would fray and expand even more, so then I had to remove up to 20% of the outer wire strands to get the cable to fit into the lugs. See first photo.I don't know if the cable was too big, or if the SELTERM lugs were just too small (no clearance). In any case when the cable is cut, the lugs won't fit when the wire strands expand as the insulation is removed. The insulation is tough. The wire strands are tough. When both are put together, the cable is one tough cookie.Even with 20% of the smaller outer wire strands removed from the cable, once crimped, the lugs held on firmly and could not be removed. After applying heat shrink tubing, the connection looked fine. See second photo.4/0 gauge cable was probably overkill for connecting 2 batteries in series, so it's my fault for buying too stiff of a cable. This cable should last forever.
Daniel Sharrow
2025-04-03 15:11:14
Cables worked perfectly for battery cable on semi
Juan
2025-03-19 14:25:20
I had order the wrong size then i order the right one i had order 2/0 then i order 4/0 and its what i was expecting so its very flexible so just keep in mind the sizes could be alittle diffrent
KEN LIEW
2025-02-16 18:41:55
The cable is good and flexible but the measurement is not up to expectation since some of them are shorter than 10ft I ordered. Red cables are those having problem. Does the guy who did the cutting have color blindness?
time transfer
2025-02-08 18:56:09
Very good heavy duty made battery wire ,Will buy more in the future
Recommended Products

$395.00

$ 99 .00 $99.00

5.0
Select Option