Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools 1-1/4'' Weldon Shank to ¾‘’ Weldon Shank Adaptor for Annular Cutters
Accusize 1-1/4'' Weldon Shank to ¾‘’ Weldon Shank Adaptor for Annular Cutters
Diagram:
Sgt. Fred
2025-08-19 15:43:31
Nitto one touch shank annular cutter bits are very expensive. This fits the outside of a weldon shank to adapt to my drill press. Of course you will need to find an inch longer pilot if you want all to work as desired.
Jason R.
2025-08-03 12:19:24
Order the product very fast shipping and good brought up top quality
David T.
2025-08-01 12:48:43
When I purchased my Vevor mag drill I could not figure out why my annular cutters would not work. Then I discovered there are multiple shanks. My drill has a nitto shank and my cutters have a weldon shank. A little more research led me to the Accusize Industrial Tools adapter. Ordered it late on a Friday and received it the following Monday around noon. Amazon and Accusize are amazing. Thanks
Jorge
2025-07-17 15:35:47
Heavy-duty construction, sharp dimensions, no wobbling connection, and excellent finish.
K Hagerdon
2025-07-09 14:35:10
it is as advertised
Matthew
2025-07-05 15:59:19
I was extremely happy with the timely delivery as it arrived over a week early from what I was expecting. The quick change fits well into my mag drill and the 3/4 Weldon fits annular cutters well. The only puzzling part for me is the bore for the pilot pin is too small for the head of the pin to pass up into the mag drill. If I use a 1†long cutter with a pilot pin for a 2†cutter it works fine as the pilot pin goes above the adapter. But once I try to use a 2†long cutter I no longer have a pilot pin. If you put the pin in the cutter like usual it doesn’t have the vertical space to retract into the adapter as the hole is cut due to the bore of the adapter being to small for the head of the pin. Thinking my only option is to drill out the bore of the adapter or run without a pilot pin for 2†long cutters.
Cosmo
2025-06-13 10:14:57
I bought the 1800W Vevor Mag Drill. It came with a bunch of metric-sized annular cutters. Mag drill is great. Included cutters are great. Problem comes when you buy other, normal, 3/4" Weldon shank bits as commonly used in most mag drills.I didn't know this before, but the Nitto One Touch shank is a standard in Asian and European countries. Mag drills apparently all have this shank over there. But I'm in the USA and we use the 3/4" Weldon shank standard. The 14-piece SAE annular cutter set I bought uses the standard Weldon shank which does not fit into the mag drill.The fix is this handy adaptor. It's a simple piece but does a very specific job. I've used this adapter with a 1-7/8" annular cutter going through 1/2" plate steel and it worked great. This little thing gets a lot of use and it just works well. Highly recommended.
Daytonacoupe66
2025-06-01 18:28:36
Fits perfectly and does the job.
Anthony
2025-05-20 15:56:50
Does its job, and does it well. A refreshing change for amazon products.
Guy Bouchard
2025-05-08 15:03:25
Do the job ,very happy!
Melted
2025-05-02 11:59:24
Does what I wanted it to do.
Will
2025-02-10 11:04:48
The media could not be loaded.
Recommended Products