Your cart is empty.
Your cart is empty.Product Description
How to install an workstation:
1. Lay the table mat flat on the workbench.
2. Connect the common point ground cord to the table mat by snapping it to the left or right snap.
3. Connect the wrist strap to the common point ground cord by plugging the banana plug into one of the ground cord's banana jacks.
4. Snap the wrist band to the coil cord. Tip: Make sure that the operator wears the wrist band on bare skin.
5. Connect the common point ground cord to ground. Connection to this ground point most easily accomplished by removing the center AC outlet plate cover screw, placing the screw through the eyelets from both ground cords, and replacing the screw. The wires can be moved to the left and right sides of the screw so that they do not obstruct the outlet.
Mason Sarles
2025-08-28 16:37:38
Great item. Exactly as described.TY.
Customer
2025-08-15 12:11:08
mat is fine. I prefer a plug style ground to put into the ground outlet of the house. But it was simple enough to use the outlet faceplate screw. The velcro wrist strap is a little clunky to get on your wrist by yourself as opposed to an elastic band.
Danny Seddon
2025-05-07 17:44:33
I was looking for a cheaper antistatic mat for my workbench and this works great. It comes rolled up so you need to let it sit in a warm area to flatten out. I do wish it had connection "Buttons" on each side but it is easy enough to move.
Train man
2025-05-02 13:57:18
Needed a relatively large ESD work mat for my electronics lab but not so big it covers the whole work bench. This one is just the right size so I can use it at the soldering station while stuffing circuit boards, and move it to my computer desk while programming the boards. Keeps me from zapping the boards and from scratching up my desk top while programming and testing the boards with my PC. One thing I would like better is to have the snap-on connection for the grounding strap at the upper left corner of the mat. Most people are right handed, as am I, so my soldering station is at the right side of the mat. So I have to turn the mat 180 and put the ground snap-on at the lower left to put it on my left wrist and be out of the way of the soldering station. Not very convenient that way, but not enough of a nuisance to knock any stars off. One suggestion to anyone purchasing this. It comes rolled up really tight and wants to curl up on you. I had to flip it upside down and use my hot air gun at 900 degrees to warm it up and get the curl out of it. I do have to say it really resists the heat. Of course, the hot air gun is constantly moving along in a circular motion, but this mat takes it in stride while it does help take the curl out of it.
Amandabrookers
2025-05-01 13:40:26
This may very well be a great product but it literally came with no instructions and I have no idea how to use. I bought this on recommendation while replacing an interior board in a VR controller and thought I bought the one they suggested but the pieces didn’t match what the person recommending was using. Phoned my dad and brother as they have experience using tools to assist with being grounded for computer/other similar electronic repair and also tried a few Google searches but nothing really helped me make sense of how to use what. So using the general advise found, I did what I thought was appropriate and I can’t say I did it right but luckily nothing was fried in the process. Although the VR attempted repair wasnt successful I’m not blaming the grounding for that. Ended up just buying a new controller. Will circle back and attempt to understand this at some point again.
Ahsan Khan
2025-04-20 18:40:20
Great product. It will work well for our need.
Dave
2024-12-28 11:53:15
I have a bunch of pop marks from hot smd components. I would think it would be more heat resistant.
BostonTransplant
2024-12-25 15:38:36
Product does as expected. Only issue I have is that wrist strap uses velcro style closure with no elastic so you need to undo the wrist strap and need to try to use one hand to feed the strap through the buckle device and tighten it. I have a second unit that has an elastic wrist strap that is much easier to use but alas it was not available when I went to buy this second one.
Recommended Products