Your cart is empty.
Your cart is empty.Product Description
The base can be used on telescope that do not themselves have a base, or be used in other different position on the telescope as an additional base.
Applied to
- The base is compatible with many standard finder brackets for 6x30 finders, 8x50 finders and some red dot finders and it has a variable radius and elongated holes which make it fit on almost all telescopes including Schmidt-Cassegrains(SCT).
Features of Product
- CNC machining, precise and smooth cutting surface.
- Easy to install and remove.
- Aluminium alloy material, durable for a long time.
- Arc-shaped design, a more stable fit.
- Works with standard finder brackets.
Precision machined finder shoe base in matte black, made of high strength aluminum with anodizing aluminium process, durable for long time use. The aluminum material makes the product lighter and easier to carry.
The base forms two linear constraints on each tube radius of 130-400 mm in diameter, which gives maximum stability. The base also carries small guidance/CCD guider without any problem.
Two large knurled thumbscrews makes it easy to install: Bases feature two large thumbscrew locks to secure your finder scope or reflex sight in place, even while wearing gloves. Just put it on the optical tube and tighten the screws.
There are two elongated holes on this base and a single countersunk hole for screws up to M5 in the middle. Two screws are on the side of base. The distance between the center points of the screw holes is 24 to 41 mm.
Joseph Chen
2025-07-13 13:59:26
This finder scope base is a perfect fit for my Nexstar 8se. I recently purchased a StarSense AutoAlign and wanted to dual mount it on my 8se with my existing finderscope. In order to do that, I needed to purchase 2 things: 1) You need a Vixen Dovetail finder base to attach to the 8se optical tube assembly (OTA) since it doesn't come with one. 2) You need to purchase a dual or triple mount finder scope bracket. The StarSense AutoAlign comes with a large bracket, which can be used to connect directly to the OTA, as well as a smaller Vixen Dovetail bracket, which is what I will be using with this finder base.I previously purchased another cheaper finder base on Amazon but it had 3 problems: the stock screws were too wide to fit in the finder base (this requiring you to buy new screws separately), the screw holes were too narrow by approximately 1mm, and the Vixen Dovetail mount was slightly too small so the AutoAlign would only fit half-way into the mount!I'm glad to say that this product by AstroMania has none of those problems. The stock screws easily fit so you don't need to buy any new screws. The screw hold are widely spaced out and easily fit the 8se OTA. And the mount itself easily fits the AutoAlign.This finder base is really well made. The curve under the mount perfectly lines up with the 8" OTA. And the hand screws are really smooth and don't wobble when turning. This finder base also has 2 hand screws instead of 1 screw like some of the other cheaper finder bases so you can feel comfortable mounting a lot of weight on the base.One nice thing I noticed is that the thickness of the metal at the center of this base is much thicker than the cheaper finder base I first bought. It seems much sturdier and less prone to bending compared to the other finder base.I noticed that AstroMania also sells another finder base for SCT telescopes. At first I was going to get that other one but I realized that the screw spacing is up to 37.3mm for that base, which is about the same as the first finder base I tried. So that other AstroMania base would probably have been too small for my 8se since the screw spacing is between 37-38mm. On the other hand this base has spacing up to 41mm, which easily fits the 8se's screw spacing.
Randy Herring
2025-06-22 14:01:41
I was immediately sold when I read Gary Elble's "Mount Bracket" review and ordered mine and paid the extra for same day delivery. It mounts perfectly to my Celestron 6se for my new Astromania 9x50 finder scope.
J. Bailey
2025-06-02 16:14:06
Bought to hold a finder scope - works well. Feels very solid.
ALeon
2025-05-30 13:44:24
I bought this to mount a finder on my Celestron Nexstar 8.The mount feels solid, and I'm sure it can withstand some abuse. The curve on it, however, is a bit too small for this specific telescope - leaving a gap underneath. The issue is that this doesn't facilitate aligning it correctly on the tube (something with the correct diameter would self-align). The mount would work better on something with a smaller diameterThe other issue I found is that the slots for the screws are way too large. The Nexstar screws almost go straight through, and there's no way to use them. I need to track down some screws with larger heads.
ninnymonger
2025-05-18 11:06:59
If you want to upgrade your finder scope on your Celestron 127eq Power Seeker, then this will do the job more than adequately. I love it.
Robert N peifer
2025-04-24 11:50:13
If you are looking for a mount for your finder scope that is just a bit more refined this is it not that it does any more but it does look impressive
Gary Elble
2025-04-10 18:46:28
This bracket fit perfectly on my Celestron 6se telescope. I used the screws that I removed with the previous bracket and used the same screws to Mount this bracket. It was a perfect fit to Mount my Apertura 90 deg 8x50 finder scope. Thanks so much.
Brian Burke
2025-04-05 10:32:54
I have a Celestron Nexstar Evo 6 and the mount itself attaches just fine. Nice and secure. The reason I say 4 stars overall instead of 5 is because of a slight difference in the thumbscrews provided versus what is pictured. There is a flange/spacer on the thumbscrews I have that is 2-3mm long. Maybe on any other guide scope the dovetail and these thumbscrews would not be an issue. Unfortunately for me I purchased at the same time the Astromania 60mm Compact Deluxe Finder & Guidescope Kit also found here on Amazon. The dovetail is a bit narrow, and because of this in combination with the space/flange of the thumbscrews, the thumbscrews will not fully secure the guidescope. I only need like literally 1mm more and it would be fine. Regrettably now I need to find slightly longer screws/thumbscrews to secure my guidescope. The real kicker is that this is two Astromania products that are not fully compatible with each other.I don't feel this is a bait and switch or slighted by any means. Products slightly change over time and I'm sure I would have still bought this adapter even if the thumbscrews I have were pictured online. Just stinks that I only need a single millimeter longer thumbscrews.
Customer in Canada
2025-03-12 16:28:17
Replaced the original red dot finder base with this one as I could not get the original celestron provided out of box red dot finder to align to the 5SE telescope. This product works well with the Nexstar with no additional holes required to be drilled. I also replaced the original celestron provided red dot finder with a finderscope with cross hairs. The combination solved my problem of lack of alignment. Recommend product.
Jeremy
2025-02-09 13:51:00
Easy to install, sturdy and fit my Celestron Edge 8HD
Recommended Products
$17.99
$ 7 .99 $7.99
$159.97
$ 75 .99 $75.99