Your cart is empty.
Your cart is empty.Product Description
Baridwon:
- Heavy Duty Door Closers (commercial or Home). Openers
- have “hold open” feature, with adjustable Hydraulic self closing
- and latching features to ensure complete and quiet operations.
- It comes in three sizes to fit most door sizes and needs.
Size is important!!!
It is very important that before making a purchase, they read the size and weight specifications chart. This helps you choose the right door closure size you need. Size is important.
An example:
* * Size: _______ Small, Medium, Large
* * Determining the proper size door closure is critical to the proper
operation of a door closure. We urge you to review the door size and
and closure size chart, by scrolling down, and determine which is correct for you,
BEFORE MAKING A PURCHASE!
Before purchasing, make sure to figure out which size of door closer suits your door!
Hey, before buying, be sure you know which size of door closer fits!
Door Closer Sizes & Specs Chart:
Small: (Door Width: ≤ 90 cm / ≤ 35.4"; Weight: 25 - 45 kg / 55 - 99 lb)
Medium: (90 - 110 cm / 35.4" - 43.3"; 45 - 65 kg / 99 - 143 lb)
Large: (110 - 120 cm / 43.3" - 47.2"; 65 - 85 kg / 143 - 187 lb)
Theoretically, choose based on width and weight. But often, can't weigh exactly. No problem. Just measure width. Guess weight. If more than ref, go big; else, go small.
Can't guess weight? Use the formula. Know or guess material/density.
Door Weight (g) = Volume (cm) × Volume Density (g/cm3)
Still can't? Send pics, width, thickness, material. We'll help.
Enhanced Home/Commercial Safety & Quiet
- Secure Your Belongings
- No More Door Struggles
- Peaceful Living
- Child & Elder Safety
3 Ways to Install: Discover Your Ideal Option
Standard Install
For: Pull doors
Use When: Door and frame are flush
Tip: Speed valve side with hinge.
Top Jamb Install
For: Push doors
Use When: Frame/door depth < 2cm/0.78in
Tip: Speed valve side with hinge.
Parallel Install
For: Push doors
Use When: Frame/door depth ≥ 5cm/1.96in
Tip: Valve-less side with hinge.
**Correct and standard installation is crucial for the proper functioning of the equipment.
Subject: Importance of Correct Installation for Door Closer
Hey! To avoid the issue some customers had (hold-open not working at 90 degrees), a proper install of the door closer is key.
A correct install is crucial for smooth door operation and all features to work.
Make sure your install matches the pics above. Wrong install = problems.
If installed right but still hard to open, check if it's right and the size fits.
If so and still tough, try changing the distance.
Worried about hard opening? Install the closer closer to the hinge.
Thanks for choosing. Any questions? We're here!
Baridwon Door Closure with Hold Open & Door Slower Closer No Slam
**Safety and Installation Tips for Hydraulic Door Closers:**
- "Safety First" - When adjusting the hydraulic door closers, keep eyes averted to prevent injury from flying screws.
- "Avoid Over-Screwing" - Ensure valve screws do not protrude beyond the commercial door closer's profile to prevent leaks and damage.
- "Rotation Caution" - Do not rotate the gear shaft 180 degrees until the heavy duty door closer is fully installed to avoid malfunction.
- "Adjust for Ease" - If the door is hard to open after installation, simply modify the distance of the door closer towards the hinge for a smoother operation.
- "Support at Hand" - Facing installation challenges? Reach out anytime for our prompt and professional assistance with your door closer setup.
Oscar Batres
2025-08-06 12:37:04
I installed this at my garage doors and they perfect for no more slamming doors, also very helpful when your hands are busy carrying things in/out your home.
N. Farquharson
2025-06-23 16:53:19
Good, strong, adjustable device. Great value for money. Sadly, the person who wrote the instructions wrote them for a different device. Also, be careful NOT to use the supplied measurements.
Nina
2025-05-18 17:50:40
Quite and efficient. Easy installation. Great quality.
Miguel De Anda
2025-05-16 15:32:02
i got this to keep a hollow interior door closed and it works well after adding a layer of wood to the door so the screws dont just tear through the door. i had to add the board because i noticed that the closer was very hard to open.once installed it does a good job of closing the door and it goes slow enough that the door doesn't slam. another downside is that it doesn't fully close the door once the latch hits the wall because of the slow speed it has.
melody Aguilera
2025-05-13 16:57:54
They make the brand name look like “Baldwin†to be a little deceptive. Then when I received the item, the arm of the closer didn’t budge. It could not be loosened and was a comply dysfunctional item. I purchased 3 and all were the same. Scan item.
Michael Santucci
2025-04-08 16:58:23
This worked great and was very easy to install. I like the versatility of both inside and outside mounting. Also, it is about half the size of the previous so it is less bulky and noticeable.
Jack E
2025-03-28 19:36:48
I cannot rate this product as it did not fit the door that it was to be used on. However, the part arrived promptly the very next day. The unit was sturdy and well packaged. The instructions were adequate to do the job. The issue with this door closer and all others with a like design is that there are three major methods to attach the unit. Of those three only one was applicable for our door. In attaching it using the regular method the unit didn't fit. The issue was the door is not in the same plane as the door framing. It is about 3/4 of an inch out of plane. In this case the storm door thickness is 3/4 inch farther away from the door frame as it was surfaced mounted. In this case one of the rods that anchor the door to the frame was not long enough. When fully extended only about 3/16 of an inch of this threaded rod would be holding the door. I deemed it not enough to be a reliable installation. The solution would be to add at least a piece of wood of 3/4 inch or greater to the door frame. When investigating this idea it would have meant removing the integral drip edge from the top of the door. The drip edge and top jamb form a single piece at the door top. It would have required carpentry and possibly metal work on the component. At this stage the job was bigger than anticipated. I need to find another solution for this application as many manufacturers have this basic design as their closing mechanism. Our application cannot use this design to solve our problem. It is not the fault of the design or this company but is an issue with any door that surface mounts to an existing door frame. Had the threaded rod been 1/2 inch longer that might have been the solution. Also, this was a small size kit. There are two other kits built for heavier doors that might have a longer threaded adjusting rod. This company makes a nice product. The housing was a solid metal casting that appears to be hot metal poured. The machining, painting and decals were very well done. The threaded rod mentioned above and its receiving female threads fit very well together.All in all I was very pleased with the product but the design did not work in this application.
Andrew
2025-01-28 12:33:22
This product was absolutely amazing. Perfect size for a small door! Highly recommend.!
Christian Sanchez
2024-11-16 15:14:26
Faltan los tornillos
Recommended Products
$168.79
$ 66 .99 $66.99