Your cart is empty.
Your cart is empty.Trail Armor combines trail-proven toughness with state-of-the-art Dura-Flex 2000 TPO material for a look all its own. Dura-Flex 2000 TPO is our proprietary automotive protective material, ruggedized for extra durability and flexibility. 100% UV protected to prevent chalking. We make everything right here in the USA, designing to the tightest tolerances for a factory-like fit. Installs in minutes with automotive-grade 3M adhesive, no drilling needed. Your Trail Armor starts out looking tough, and lives up to its looks year after year.
David S.
September 6, 2025
The Bushwacker hood guard went on in a jiffy. I’m talking 15 minutes tops. Most important thing is making sure you prep your surface with the alcohol prep wipes. Let it air dry before trying to do the application. As you start to prepare that application size it up before you peel off any of the adhesive backers make sure it’s fitting where you want it. I did do a slight trim on some of the plastic on the one edge was just a little bit further down than the other Side, no big deal. To get started follow the instructions but let me give you a tip, pull about 6 to 8 inches of that adhesive backer away on the top two strips and the bottom two strips and let them dangle when you place it onto the hood and then start moving it outward left to right, 6 to 8 inches at a time pressing hard along the way behind you. This will do two things, that gives you something to pull on that tape without having a pry back up to reach under it to get the next one started and as you press as you go, you’re bonding the adhesive to the hood. Mine looks great and it’s functional. It actually does reduce the bug splat onto the glass of the windshield. It’s a low profile. It looks great and I’ve gotten many compliments. I highly recommend.
Robert S.
July 27, 2025
Love the new look it gives to PhinsUp !!!
SKY
July 14, 2025
I recently purchased a Jeep hood bug deflector and I have to say, I'm absolutely thrilled with it! This is the first time I've used any kind of bug deflector on my Jeep, and it has been one of best add ons to the vehicle.The deflector is extremely well-made and fits my Jeep perfectly. It was easy to install and took less than 5 minutes to do so. The deflector is made of a light weight material that I'm sure will hold up for a long time.Since installing the deflector, I've noticed a significant reduction in the number of bugs and debris hitting my windshield while driving. This has made my daily commute much more enjoyable, as I no longer have to worry about constantly cleaning my windshield.Overall, I highly recommend this Jeep hood bug deflector to any Jeep owner. It's a small investment that will make a big difference in the appearance and functionality of your vehicle. Trust me, you won't be disappointed!
Dave Stonehocker
July 5, 2025
Fit and finish is awesome, as expected from Bushwacker. Protection from rock chips on the leading edge of hood is A++ . Reduces bug splats on the windshield by only 40-50%. And doesn’t direct air over the windshield like others I’ve owned, but I like the styling, the OEM type material and the hood protection. Since this was most important to me- I give it 5 Stars.
John
July 1, 2025
This is my experience and may not be yours... so take it with a grain of salt. I opted to not remove all of the tape backing when I applied since I was concerned about getting it aligned correctly. I don't know if that was smart or not. What I do know is that it was a pain, not overly difficult, just a pain, to remove the backing while trying to hold up part of the unit and not lose the tape already working. A pain, but was doable. The hardest aspect was grabbing the backing to start it. I ended up using a flashlight, tweezers, and a crick in my neck. The end result looks great though. I know I would have messed it up trying it all at once.With tape being a necessary evil I will leave it at that. no +/-My only desire would be to have had it wrap under my hood, even if it was just with tape. There would be no edge to have the wind constantly tugging at.Will it fail? I'll just keep an eye on it and upgrade if/when a major issue. I am not anticipating a big issue though. so.... LOL It looks great so I will call it good for now..
DanF
June 24, 2025
Was delivered on time, went on with no problems ( I recommend heating the 3m tape before installAs I did, its not going anywhere. Highly recommend this.
Jon Vanover
June 5, 2025
Fits perfectly, but the edges are cut very lazily and are very sharp. There is also no way to tell where the center is without marking it yourself. The guard comes slightly warped and has to bend to fit, so make sure to mark it very well when you apply it. Once you apply it and get it bent to fit the hood, it isn't going anywhere and looks like an OEM part. The added flare on the guard is worth getting as it provides more air deflection from the windscreen. It reduces highway speed noise slightly and throws light FOD upwards & away from the vehicle while in motion. Does not affect the hood sprayer efficiency. Does not fit the larger hood such as the 392, so be advised.
darren gugle
June 2, 2025
Very easy to install and looks really good
Good Purchase
May 29, 2025
Tried buying a cheaper one - what a mistake. The cheaper one had a curve in it - making it impossible to install. This one is more expensive, but worth every penny. It even has instructions. Followed them and it fits perfectly!!
Ramon H
May 16, 2025
Muy fácil de instalar, da un toque extra a la apariencia del cofre, quedó como de fábrica!Convence la Textura del cover da un toque rudo personalizado al Jeep Wrangler Sahara 2020!Muy recomendable.
Jean-Louis
April 30, 2025
Easy to install, just follow the instructions provided, looks good on gladiator 2021, installed few months ago and no issue so far.
Roland
April 20, 2025
Looks great works nice job
kimberley
February 19, 2025
Best to have two people to install.It looks great and is good quality. Would recommend to any Jeep owner.
Recommended Products
