Your cart is empty.
Your cart is empty.Product Description
3 JAW PULLER BEARING PULLER TOOL
The 3 jaw bearing puller extractor has a wide range of uses. The pilot bearing puller can remove all sleeve bearings with an inner diameter of 1/2"-2". It can be used in automobile bearings, motorcycle and electric vehicle bearings, mechanical bearings, agricultural machinery, etc., with high strength , Torsion resistance, good hardness, sturdiness and practicality (no need for pilot bearing, pump bearing, electric brush)
UPGRADE NUT DESIGN
Sturdy structure, high strength torque, high toughness. As long as the small wrench is turned gently, it will generate a great pulling force, which is not only anti-slip but also firm, saving time and effort to use
ROTATING ROD
The 3 jaw bearing puller is made of high-quality carbon steel through forging and special heat treatment process, with high strength, good toughness and longer service life
3-JAW DESIGN
The 3 jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure stability during use
SPECIFICATIONS:
- Material: carbon steel
- Color: Black
- Application range: 14-38mm / 0.6-1.5in
- Tensile range: 50-95mm / 2.0-3.7in
- Claw Length: 80mm
- Arm Length: 86mm
- Wire rod length: 175mm
- Hexagonal diameter: 14mm / 0.6in
- Bar Length: 125mm
- Total Height: 200mm / 7.9in
- Total width: 135mm / 5.3in
- Package size: 180 * 140 * 50mm / 7.1 * 5.5 * 2.0in
- Package Weight: 800g
PACKAGE LIST:
- 1 * 3 Jaw Inner Bearing Tool
Tyler J.
July 16, 2025
Worked great for pulling a blind needle bearing out of a Jeep transfer case.
Kindle Customer
June 18, 2025
Pulled the front diff axle bearing B2010 out. Excellent fit and function
Martin
June 15, 2025
We bought the tool to remove the ring of a wheel bearing that we could not get out using screw drivers, pry bar, 5 pound hammer etc. The initial attempts were not working well. Either the prongs would slip, the braces would slip etc. We added then three things and removed the ring in a minute.1 we added a socket in the hole to keep the prongs from bending in/slipping and it forced the prongs to stay on the ring to provide the upward force.2 we added a c-clamp on the braces to keep them in place on the rotor.3 we added a pipe over the cross brace to keep it from rotating as we were titening the bolt downward.After these additions the ring came out without too much issues. Overall a decent tool but needs reinforcement
pete
June 6, 2025
have not used yet, looks able to do as described
Pandian
May 30, 2025
I made a mistake that I bought it and kept it couple of months before opening the box. When I get chance, I tried this item and it doesn't even care to pull the bearing from my motorcycle wheel. The teeth isn't biting the edge and it just lost its sharpness. I literally wasted my month on this junk. Finally, I bought OMT bear removal tool and removed one of the bearings. Eventhough, I had good space now since i removed bearing and spacer that gives me a hollow space. However, the teeth doesn't even care and doesn't even shake a bit of bearing. PLEASE DON"T BUY SPEND YOUR MONEY SOMEWHERE ELSE. OR, IT IS NOT FOR MOTORCYCLE. GOOD LUCK.
GBinMTA
January 16, 2025
The conical shaped piece in the middle (spreads the claws) fell off during first use. I also needed to modify the arms to provide the strength needed. Was I successful with this tool? Yes. Was I frustrated with this tool? Very.
Axel Molina
December 28, 2024
Fast shipping , as describe.
Steve
November 15, 2024
Whoever made this has clearly never looked a a pilot bearing before, the hooks are too big to pass through. I'm sure it works for other style bearings that are bigger just fine, which is why I gave 2 stars. But if you're looking to use it on a pilot bearing, I'd pass
Recommended Products
$99.00
$ 41 .99 $41.99
$36.99
$ 16 .99 $16.99