Your cart is empty.
Your cart is empty.Product Description
Variable speed control with soft starting motor features full time electronic feedback that maintains motor speed through the cut. Dual LED's and clear sub base ensure maximum visibility, adjustment ring enables controlled bit depth changes, large, low-pressure spindle lock button, multiple shaft lock detents, depth ring, clamping mechanism and spring loaded release tabs. Specs: 7.0 amps, 16,000-27,000 RPM no load speed, 1/4" collet diameter, 1.5" plunge stroke, 4" base dimension, 12 position spindle lock, weighs 4.1 lbs. Includes: motor, standard base, wrench and instruction manual.Plunge base incorporates fine-tune adjustment rod for precise depth setting.
Amazon.com
Combining power, ease-of-use, ergonomic features and innovations designed for visibility, control and overall performance, the DEWALT DWP611 compact router can handle a variety of applications--from small bevel cuts to large edge profiles and heavy flush trimming. In addition to its beefy 1-1/4 horsepower motor, the DWP611 is equipped with dual LED lights for ample illumination. This package comes with a fixed base, but it's also available as a kit with both fixed and plunge bases.
The DWP611 with fixed base (view larger).
Dual LED's and clear sub-base ensure maximum visibility (view larger).
Power and Performance
The DWP611 compact router features a 1-1/4 peak HP motor that delivers significantly more power than competitors' models to help you be as productive as possible. The variable speed control helps you to better manage the tool and determine the speed that is best suited for the application at hand. A low, contoured grip that is close to the work surface also contributes to an excellent level of control--providing both precision and productivity on the job site. The soft starting motor features full time electronic feedback that maintains motor speed through the cut. An adjustment ring enables controlled bit depth changes to within 1/64-inch.
Comfort and Convenience
The fixed base's dual LEDs and clear sub-base ensure maximum visibility in operation. The extended 1/4-inch router collet provides greater bit contact with the bit shaft than traditional routers, allowing you a firm grip on the bit and less vibration. The D-shaped sub-base provides stability and flatness when running edge profiles, and the spindle lock has been designed to greatly improve the ease of bit change by incorporating a large button that can be actuated with the same hand that stabilizes the router.
The router also features two tabs that allow for a quick and simple base release, and a new base/adjustable clamp design so the motor location is maintained through the toughest applications.
Warranty
This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase).
P.L.
2025-08-17 18:57:28
The media could not be loaded.
Silverback
2025-07-24 16:03:14
Well apparently I got in the router market just in time to see a big upgrade, by big name manufacturers anyway. I did not need a super heavy duty router so the Bosch colt which was the brand I'm used to was a reasonable 100 dollar item. The Dewalt 1.25 was 170 on Amazon. Then I found it..as some sort of combo deal at 110 with a spare base plate that was sent separately and much earlier than the router arrivedbecause they were out of stock already and wouldn't charge my cars until it was available...I went to Lowe's to find a colt because I needed a router to finish these drawers for a kitchen I'm building but they only had one Palm router available...the new dewalt 1.25 for 170 bucks. Bosch discontinued the colt. Mission failure...so I used my big ass plunge router to finish the drawers...it was a beast and the router bit kept gouging the corners. Where is my router?!! 2 days later I'm at Lowe's and the Bosch 1.25 had its own display separate from the router section entirely. Of course I was already committed to the dewalt which is my brand of choice these days anyway..and sure enough when it arrived I busted it right out to try it. Glorious large base plate...very balanced and easy to keep stable and upright. The speed control is nice as I was only doing 1/8th over rounds and didn't need it to scream at me. I have big hands but the diameter of the unit is larger than im used to...I love the height adjustment latch..its secure and doesn't get in my way. I can see the work while my hand is on the base. Very happy plenty of power great deal!
J Man
2025-07-09 12:44:23
This is the best one for small trim routers without a battery. The way it corkscrews for height is very useful.
R. McKown
2025-06-27 16:33:56
I'm not really qualified to write this review, as this is my first router. However, I found the unit to be of excellent quality. I would definitely recommend getting the centering cone, as this router came with the base plate slightly misaligned. The depth controls work well and are spot on for calibration. The motor has a slow start so it is very easy to control. I used it to cut rabbets and dados in 3/4" ply to build a battery box for a small solar system. I had no problems with this unit other than operator error. I was initially cutting at too high a speed and too slowly. Once I did some reading, I was able to solve this error and had nothing but great results. Carve out small chips, don't make dust! The work detail LED lighting is an unexpected bonus. I discounted the LEDs on purchase, but in using the unit, the task light right down on the work is invaluable.A couple things I didn't like. The base is a weird width, so it's less intuitive to determine the distance at which to clamp down guards that the base plate is to run against. Also, I found that the little vertical notches in sides the base plate would tend to catch on the guard and tend to twist or push out the router. This problem was easy to work around once I was aware of it.I'm glad I purchased this router. It's a very affordable price for the tasks it can handle.
21 Truck
2025-06-10 13:46:37
This is a very handy little router and I predict it will get a lot of use in my shop. Much of what I use a router for is rounding over edges and other work that doesn't require a lot of horsepower, yet my router for years has been a big, heavy, powerful Hitachi plunge router. The Hitachi is a great tool, but handy, it ain't. This little Dewalt is a great size, has simple, no-frills features and spins a roundover bit with the best of them. The spindle lock works well with the one supplied wrench, the switch and speed controls are in reasonable locations and the LED lighting is pretty cool.I had considered the Bosch Colt, but it seems a little toy-like compared to the Dewalt. I also looked at the Porter-Cable 450, which is a virtual twin to the Dewalt, but lacks the variable speed feature and LED lighting. Seems like this would be a terrific tool for a finish carpenter - sturdy enough to survive the jobsite, good power for typical finish tasks and it doesn't take up a lot of space in the truck. Like others, I'd like this router even better if it came with a case, but it'll probably get used often enough that it will just sit on a shelf where it's easy to grab.
Ib
2025-05-09 11:10:00
ثبات Ùˆ استقرار ÙÙŠ اثناء العمل به
rp foreman
2025-04-17 15:00:49
Brilliant
LaloRoX
2025-02-06 12:16:37
De verdad creo que hice la compra perfecta. Hace años tenÃa un router que funcionaba con estos tipos de añillos para la profundad de la fresa, se me hizo genial que esta versión de "Palma" tuviese este mismo sistema. El otro, el de cremallera no me gusta nada.En cuanto a la guÃa para el borde (que se vende separada), queda súper fija, no hay modo de que se mueva ni un poquito.Por otro lado, respecto a los leds, jamás se me hubiese ocurrido poner luz en la base de un router y, con esta maravilla, resultó que es muy útil poder ver claramente lo que se está haciendo.No sé qué tanta diferencia exista respecto al modelo inalámbrico, pero en lo personal en esta herramienta, no ha significado ningún tipo de incomodidad.¡Me gustó mucho!
AMD
2025-01-12 17:25:39
For the majority of uses, a great palm sander. The fit and machining is very good. Manual depth adjusting is done by unlocking and turning the motor housing inside the machined barrel. This is a very smart design and allows depth adjustment on the fly. There is also fine adjustment but it's not meant to be used on the fly rather in advance of a cut.The power is more than sufficient for most of my needs and the motor circuitry maintains the same speed while idle or when loaded and cutting. The soft start is ok, but I think it could be refined somewhat, but better than instant on. As most routers, better to start at lowest speed from off and increase.Of great help are the LED lights that illuminate the base. Some have shrugged at this feature, but I find it immensely helpfull especially for detailed work.Bottom line, Overall, I used a new Freud 1/16 bit for inlay work on teak, and this tool will allow highly precise work. The usual work, for example routing edges on kitchen cabinet doors, is very straightforward with it.Last, it also comes as a set with a plunge base, but I didn't need it for now - point is that it's very versatile for most jobs.
Germán pacheco
2024-11-23 17:00:03
Ya habÃa tenido routers económicos que cumplen el trabajo y no lo hacen mal pero... créanme que se siente la diferencia cuando compras algo de calidad superior, lo subes en velocidad y no se escucha forzado trabaja de maravilla de verdad una chulada y tal ves me anime a comprar el dewalt 618 para brocas de 1/2, si lo compran no se van arrepentir
Recommended Products
$367.60
$ 99 .00 $99.00
$75.99
$ 30 .99 $30.99
$279.00
$ 99 .00 $99.00
$30.99
$ 14 .99 $14.99