Your cart is empty.
Your cart is empty.Product Description
Kathymiddleton
2025-09-04 17:09:45
I was a little skeptical because it was so inexpensive, but it cut thru my ceramic tile like a champ! And the suction cups worked great! I love it!!
False Idol
2025-08-27 15:30:02
I took a chance on this tile hole saw kit and it's worth every penny. The suction cups worked very well on polished no textured porciline tile. I got the set with the gold bits and I used 1 bit on a job and made 17 holes and it looks like it could cut 20 more. The bit has almost no wear so far. I recommend and will be buying the bits again. The suction cup keeps you in perfect alignment and allows you to plung in straight instead of 45 degrees like you usually do. I used it to hang towl bars and mirrors in a bathroom I just tiled to the ceiling. Just start slow with medium presure and increase the speed to medium once you are about 1/8 inch into the tile. Add water by sponge every 30 seconds or so.
Blaine Rodes
2025-08-12 17:14:40
They worked great on ceramic tile I installed for my shower.
nitewulf50
2025-07-27 21:33:40
My counter is 1.25" thick and I was able to bore a hole through it in about 5 minutes. Stopped a couple times to rinse off the bit to clear out the buildup and re soak to little sponge I shoved inside. Took that out towards the end and punched right through. 100 percent recommended. Holes are ready for my hand soap pump and disposal air switch now 😃
nahir
2025-07-26 18:11:07
The bits can be used for a few holes each on porcelain tile. So worth the purchase if you have a small job and don't want to spend the money for higher quality for multiple bits.The suction cup/jig, I give 1 star. The roller bearings are good, but zero suction. Do not rely on it as you may scruff up the surface of your tile... or it will walk and you'll have a misplaced hole. You could try clamping it to a flat surface, or buying something else.
JRosario
2025-07-19 10:02:01
I love it, really easy to work with
Terry Ogden
2025-05-24 18:16:34
Thought the product was great, just what I needed to drill through our granite counter top to install a new faucet. Could not be happier. The suction pads were well strong enough to hold the bit still, they way they fit together on the bit helped hold the bit straight. During drilling the bearings used to guide the bit did not crawl up or down, held steady and true, did not bind. I have seen other systems for doing this but at a much greater cost. The diamond on the bits while nickel plated held well and worked well through the whole 1.5 inches of drilling. Just let the bit and the drill do the work, additional pressure was not needed. Trying would have ruined the bit before the job was completed.
Brittany Welsh
2025-05-17 11:52:09
Do not purchase-I ordered these then my shower install got delayed, so I'm just now beginning to install grab bars. Started today....the 6mm bit bore one hole and was done, the 8mm bore three holes and was done. Before you ask...yes I was using water during the drill...these are just cheap inport junk and of course now that my project was delayed I'm passed the allowed return date
Steve Burke
2025-04-07 14:13:25
Stabilzer works perfect to stabilize hole saw. Once you get hole started, remove device. Make sure you use water with hole saw
Canteador
2025-04-01 21:37:52
Excelente para lo que lo necesitaba.
José Genaro
2025-02-20 17:55:15
Le gusto mucho
David
2025-01-14 16:27:07
As Described
Customer
2024-12-09 16:30:25
For the price it is an amazing cutter! Didn't expect such excellent quality. Highly recommend!
Recommended Products