Your cart is empty.
Your cart is empty.Product Description
Professional Bule Nano nAco Coating - 2.5X Longer Life Compared to Uncoated Bits
- Blue nano nAco coating Series Router Bits utilizes a special unique carbide with composite coating for a longer lifetime (up to 2.5X longer life compared to uncoated bits) in modern materials.
- Nano blue coating enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
EANOSIC 1/4-Inch Shank CNC Downcut Spiral Flush Trim Router Bit with Bottom Bearing
- Sturdy Durable: The down cut flush-cut router bit is made of premium carbide according to stringent Industrial grade quality standards provide tough, resists wear and high cutting performance.
- Sharp Efficient: The downcut flush trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits. Provide better chip evacuation, less heat buildup, and cleaner edges.
- Smooth Stable: The bearing bit uses a ball bearing pilot at the tip to run against your project template ensure smooth running.
- 2.5X Ultra-long Life: The Blue Nano nAco Coating provide heat resistance and wear resistance,enseure great performance and provide up to 2.5X tool life
- The downcut spiral router bit suit for CNC router and any plunge routers with 1/4" collet.
C Olby
2025-09-03 11:39:53
I bought this for using on a trim router mounted in a router table. It works great and is sharp. A lot better than a straight cutting bit. Great quality for the price, I would definitely recommend it.
Justin Zak
2025-08-13 13:16:49
It cut 3/4†plywood like it was butter. Make sure the guide board is secure and long enough and don't try to handle it without one. If the wood is hard, the router will pull away from you and slice quickly into places you don't want to cut. I made that mistake trying to finish the last inch to the corner of the work table I was trying to give a straighter edge. Instead it pulled itself out of my control just long enough to make a deep gouge before I could pull it away. I just didn't expect it to cut so well. But the reason I tried it first on that was because I didn't really care much about damage, since it's just a work surface that will get beat up anyway, so no big deal and it kept me from making that mistake on the shelves I was making.Not sure about how long it will last, but at least new it's pretty good for the price.
Rhino
2025-07-30 18:26:30
Flushed-up some hard maple strips I used to edge band some plywood. This is my first experience with a 1/4" shank flush trim bit, it seemed to struggle a little. Still did the job but I just had to slow down more than I expected.
Randy Hjortland
2025-06-26 16:02:21
Bought this bit for a speaker build. Worked great. Much easier and smoother then the razor method that l have previously used to trim my walnut veneer.
eff me
2025-04-20 17:00:36
do not buy these. the top comes off and the bearings fall off. i bought the 2 pack and the first one lasted about 3 minutes. the top comes off where theres supposed to be a set screw to hold them in place. but theres no screw. theres no way to tighten them. the second one i used lasted about 5 seconds before that one came apart and went flying off. i was using them in my handheld router and the one hit me in the shoulder before flying in some random direction. completely messed up my project. do not buy these, not only do they not last, but you will definitely screw up whatever you are working on. unfortunately my return window closed so im out the money i spent on them, but theres a reason they are cheap. guaranteed to fall apart and mess up you work so you are not only out the cost of bits, but the cost of material and time spent on whatever you are working on. total waste of money and time. be forwarned, these are the worst of any bit you can buy or use.
Customer
2025-04-16 21:02:28
This router bit has saved me a TON of work! Works perfectly to route out siding base layer for windows and doors!
Michael Neumann
2025-03-12 13:08:05
This bit fits perfectly in my DeWalt spiral cutting tool and worked great for cutting out windows and doors after hanging drywall. I also used it to trim some of the 90° corners that weren't completely perfect.
Roland Gonzalez
2025-02-21 15:30:15
This bit will save you so much time and trouble when doing vertical openings in wood. Works like a hot knife through butter.
Jason gray
2025-02-19 10:01:51
Burnt out after used twice now amazon return window has closed despite faulty manufacture. Don't waste your money
Emily Andrew
2025-02-16 13:40:35
Works great
Darren
2025-02-15 11:06:05
Awesome tool to have , be gentle with it use it properly and it will last a long time!
Eric Begin
2025-02-10 19:46:23
Cut through osb like it was nothing use the router to cut out windows for framed walls, got a house and a half of use out of the bit before the bearings came off, was still relatively sharp and faster then others I've tried.Ordered another one because I was happy with the performance and price but the bit broke after secound use.
Jacques Provost
2025-01-20 14:23:24
Nice and easy cut on my guitar body. Very happy.
Recommended Products