Your cart is empty.
Your cart is empty.Spiral-flute bits combine a shearing action in cutting with an auguring action in chip clearance. The shearing action yields an especially clean accurate cut while the auguring action clears chips from the cut.The ‘down-cut’ cuts from the surface down leaving a smooth edge at the surface.Special unique carbide grade increased clearance geometry and razor-sharp cutting edges with polished flutes provide a superior finish and longer tool life especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard, plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers, #46206-K, direction: down-cut, (D) diameter: 1/2, (b) Cutting height: 1-1/4, (D) shank: 1/2, overall length (L): 3, flutes: 2, 46206-K Solid Carbide spektra extreme tool life Coated spiral plunge 1/2 dia x 1-1/4 x 1/2 inch Shank
Neil O'Moore-Klopf
2025-08-14 13:50:13
I've bought the standard carbide version of this bit before and I must say since I use 1/2 inch bits for dados on cabinet parts and I use a dado construction method on prefinished plywood I always get a nick 3/8 up from the tip within a month because the acrylic finish is much harder then the plywood. but Amana really knows their stuff. I've used this bit constantly for over a month and its still as sharp as when I bought it from top to bottom also because of its coating it doesn't make burn marks on the work piece or the bit and has pretty much no resin build up. I no longer have to clean my bits with lacquer thinners and a brush. its deffinatly worth the extra money if you want long lasting quality, clean, and crisp cuts. same can be said for all the other spektra bits. I pride myself on quality woodwork and this is the only solution.
Retsubllab
2025-07-04 21:37:52
Buy Amana and be satisfied, or roll the dice on cheap imported imitations.
Denn
2025-06-24 12:54:32
I have tried a few different bits from other companies but these seem to last the longest and give the best finish.
ChickenRancher
2025-06-06 18:06:32
Holds up really well.
Doug
2025-05-15 16:10:12
Very sharp. Worth the money.
Phyllis
2025-05-01 18:20:05
I have now bought two of these bits. First one snapped on the first use. I accepted it as a fluke or possibly my fault. Second one did the same exact thing and snapped in the same exact place. I hadn’t even got the the point where I attempted to plung the 3/8†this plywood cut I was going to attempt. At this point I feel like I could buy 10 of the yellow brand garbage for the same amount as one of these. So frustrating.
pythan
2025-04-23 11:38:20
I am cutting 1/2" melamine and it does a great job. Nice clean cuts
FairyNChuck
2025-04-10 11:08:12
Wow! Really good bit!!!!
Cristian
2025-04-01 16:53:50
I got this bit to cut into the top surface of a solid walnut desk, for a cable slot. The finish was outstanding, well worth the price paid!
avjmc
2025-03-19 21:46:45
Sateisfait, bonne qualité.
Jonnyguitarman
2025-02-06 12:28:46
You can really tell the difference when you use an Amana bit over cheaper bits. The quality of the cut is outstanding.I wont use anything else.
Ian Forsyth
2025-02-01 13:48:36
Super quality bit well worth the money.
Recommended Products
