Your cart is empty.
Your cart is empty.Product Description
Shawn
August 31, 2025
Pretty decent set of spacers, they allowed me to do a dually conversion on my ram 2500. Only used on rear axle
PAUL J ADAMS
August 25, 2025
After a bunch of research, I took a chance that spacers for a 1988-1998 F-250 everywhere else would also fit my E350 through Amazon even though the automatic cross reference program didn’t think so. Fit is perfect. Material shows absolutely no flaws. With a small shim ring they could be as hub centric as the original wheel fit. Without I suppose that if you were not careful about the tightening sequence there could be a centering issue. Is seriously doubt there will be any movement after proper installation with the supplied thread lock and proper torque. The two-inch spacer cleared the studs fully. The nuts shipped on the spacer’s lugs are what attaches it to the hub. They used a 13/16 wrench so the socket would clear. The small clearance of that socket confirmed each hole was perfectly aligned. I wish I had ordered capped nuts for appearance but had to use the original ones. What these did for me it bring the wheels on my camper out to where the body manufacturer apparently intended without adding duals. The chassis has a full floating axel and the wheel center is still not out to where it would be with duals so I don’t believe they should adversely affect the bearings. While the literature may not be fully Americanized I did not find any quality issues.
James Turner
July 6, 2025
Make sure what you order is what you need. Did not see that these fit up to 2011. I needed them to fit my 2024.
karen palmer
February 26, 2025
Works as intended! Happy with purchase
Manuel
February 20, 2025
Got these for a 2016 ram 2500 spacers good quality I use the lite for the factory studs. I torque down the spacer to factory specs. Then I took down the wheels to factory specs definitely gave the truck a really good look I do heavy hauling, And deliver firewood. I I haven’t had any issues with the spacers and I haven’t had to re-torque them. I hope my pictures show buyers what you’re getting. Thank you!!!
Brian S.
January 28, 2025
I purchased a set of these wheel spacers for the rear axle of my 1994 Ford F350 to get my rear axle to match the width of my front axle. Worked great for me, even turning 39.5x16.50R16 on beadlocks
sierra stoughtenger
January 8, 2025
I order two sets of these to mount my wheels to my truck when I opened the boxes the one set came with the lugs to mount the to the truck the other set didn’t have lugs at all. Will be returning the one set. Slows down my build process
Cody P.
December 6, 2024
Lug nuts that come with are to big as others are for 3/4 socket to fit inside the lug hole on spacer to bolt to vehicle. These came with lugnuts for a 21mm socket and can not fit socket into lug hole and had to go buy all new lugnuts to use them. Yes i know its cheap and get what you get but have ran several amazon spacers on my trucks and this is only set ive ever had this issue with.
Recommended Products