Your cart is empty.
Your cart is empty.Product Description
GODO Dual Bay External Hard Drive Docking Station USB 3.0 for 2.5/3.5 inch SSD HDD
GODO 2.5 / 3.5 inch HDD SSD Hard Drive Docking Station
Widely Compatibility:GODO two-slot hard drive dokcking station supports all 2.5''/ 3.5'' SATA I/ II / III HDD SSD drives (up to 2 x 18TB).The product is compatible with almost all kinds of 2.5” and 3.5” HDDs and SSDs on the market. Compatible with Windows, Mac OS, Linux and Android.
PS: Clone : 25% 50% 70% 100%（LED indicates the progress status）
Note: When other waiting LEDs flash back and forth, it indicates that cloning is in progress, not a fault.
Characteristic of 2.5/3.5 Clone Docking Station
LED Progress Indicators
Each grid LED light represents 25% of the completion progress, the completed progress light will be on for a long time, and other waiting lights will flash back and forth; When all LED progress indicators are remaining on Until the power is turned off , the Clone is completed.
Note: When other waiting LEDs flash back and forth, it indicates that cloning is in progress, not a fault.
Dual Bay Sata Docking Station
GODO USB Type-A SATA 2.5” & 3.5” Dual Bay Docking Station
The GODO SATA Hard Drive Docking Station enables you to access desktop or laptop hard drives, without the frustration of assembling hard drive enclosures. By inserting a 2.5"/3.5" SATA hard drive directly into this docking station, you can quickly access drive contents and transfer files. Plus you can swap out hard drives effortlessly with plug and play mounting. Transfer data quickly and easily through USB 3.0 at speeds up to 5Gbps.
Non Slip Mat
Thick and good silica gel, more stable on the desktop，GODO External hard drive docking station enclosure With this anti slip rubber pad, it won't slide or break，Can better protect your HDDs and SSDs.
Hard Drive Docking Station Size
Synchronize with the world
Since 2009, GODO's branding strategy has been officially launched. After 17 years of industry development, it has its own patent advantages in PC and mobile peripheral hardware. GODO Motivation has become an important core unit of the current and future intelligent world, and has remained outstanding on the path of Internet evolution.
- One bit, One generation
- Expand the future
- Connect the happy life
GODO USB 3.0 to SATA III Mini Dual Bay External Hard Drive Docking Station
Specifications:
* Support all 2.5 / 3.5 inch SATA I / II / III HDD & SSD. Support up to 2x18TB drives
* Support USB 3.0 super-speed (5Gbps),Backwards complies with USB 2.0 hight speed (480Mbps), USB 1.1(12Mbps), USB 1.0 (1.5Mbps)
* Support UASP: 80% faster than traditional USB 3.0
* Support Offline Clone Function
* Support One Touch Backup or Duplicate
* Easy installation: Tool-free, no driver needed. Hot-swappable, plug and play !
- What's in the box:
- USB 3.0 Dual Bay Docking Station x 1
- USB 3.0 Cable x 1
- Power Adapter 12V/3A x 1
- User Manua x 1
Use Scenarios of Dual bay HDD SSD docking station
Connecting the PC/Laptop
Data can be stored and read at any time,the USB 3.0 hard drive enclosure will provide you greater convenience of use and versatility of digital data storage
Connecting TV
Watch a large number of high-definition movies, collect and download favorite TV plays and movies.
Connecting PS4/PS5
Play games freely, store more games, and don't worry about running out of computer memory
Connecting the Routers
By connecting the Routers,remote Access Seconds to NAS
Offline Clone without a computer:
Attention
- The target disk B must be larger than the source disk A.
- Please backup files in the target hard drive (HDD B) before cloning. Any files in target hard drive will be overwritten when offline cloning occurs.
- To avoid data transfer errors, overheating and damage to the device please make sure that there are no faulty driver cells.
- To avoid data loss, do not remove or insert drives when one drive is working in the docking station. Please power off the dock before removing.
Tool Free Installation
Installation Steps of 2 Bay External Hard Drive Dock
1, Install the hard disk into the hard disk base .
2, Connect to the power adapter .
3, USB cable is connected to the computer .
4, Turn on the power switch and start working .
Offline Cloning is so simple:
Clone : 25% 50% 70% 100%（LED indicates the progress status）
01. Differentiate A/B disk: HDD A is the master disk, HDD B is the sub disk, and the capacity requirement of HDD A ≤ HDD B.
02. Prepare the target disk: The data of disk B will be cleared when Cloning.If there are important data, please use the computer to make a backup first.
03. Connection: Disconnect the computer from the hard disk, insert the hard disk into the corresponding drawer, and then connect the power; Press the power switch and wait for 10 seconds to let the hard disk run to increase the speed.
04. One key operation: long press CLONE key for 3-5 seconds to start automatic Cloning; Each grid LED light represents 25% of the completion progress, the completed progress light will be on for a long time, and other waiting lights will flash back and forth; When all LED progress indicators are remaining on Until the power is turned off , the Clone is completed.
Eran M.
2025-09-01 11:19:46
Connects all your old data to USB
H. Watkins
2025-06-23 17:39:42
Works perfectly, hooked up and within a few minutes Windows had recognized the device and the drives installed in it. Speed is solid if you keep in mind it is USB 3.0, don't expect NVME levels of performance, but as far as helping hardware test drives, pulling data off old drives and generally using them to image one drive to another - it's well worth the small price.
Joseph Yarka
2025-05-29 20:58:12
This works well when you want to use it as a docking bay for hard drives. But once you try and clone or move files from the docked bay to any other drive you will corrupt both drives. I used this for a few weeks for my Plex server to store my movies on a spare drive I had. when I needed to swap out the spare drive with a larger one I tried the clone feature and it took forever, then when it was done I went back to file explorer and both drives were corrupted. I tried it with another drive and same thing both came back corrupt. I would never buy this brand again unless I planned to use them as just a dock. Even then I would be hesitant since when I tried to copy larger files boy was it terribly slow im talking 25mbps slow when its rated for 5gbps. I have never seen any thing go that slow even on HDD's its insane. wouldn't recommend this to anyone wanting to clone drives or move larger files maybe use for file/photo storage but even then the risk of all your stuff getting corrupted is not worth it.
iva
2025-05-05 13:57:32
Was an easy plug and play for a SAS drive, I just don't like that the drive is not perfectly still in the vertical.
Doug S.
2025-03-27 14:28:29
use it all the time, great for taking out a hard drive from an old computer and using it for a backup
Run, Francisco
2025-01-07 17:58:07
excellent
John carr
2024-12-17 11:06:25
Purchased the single bay device so that I can image my main PC. For that, it seems to work fine. I connected it to my high speed USB port, and when imaging the PC using Macrium, I get around 330-380mbs/sec. That might be slowed down due to compression. Will have to test w/o compression. So, for backing up my C: drive, it works fine.The SAS drive connected does get pretty darn hot! Admittedly, maybe I was pushing it too hard, as the first backup attempt took 25 hours. The job failed after 24 hours and the drive was so hot it could no longer be recognized. I took it out, tried some other drives, and they all recognized. After letting the SAS drive cool for a few hours, it worked fine. I ran a smaller job only backing up the C: drive of the main PC, and the job went fine.So for now, i don't recommend keeping a drive connected to it 24/7 unless you have some form of cooling.The USB cable that plugs into it kept coming loose. It took me a few tries to get it to stick into the cradle. I recommend that once you get it connected, leave the USB connected and never disconnect it from the cradle. Just remove it from whatever PC it's connected to.Edit: A day after writing this review, I went to use the device again and it would no stay connected. As soon as it started writing it would disconnect until restarted. Tried 2 computers. Sent device back for a refund.
Jenny L.
2024-11-29 10:11:56
Bought to use as a drive bay for disk-to-disk transfers, just trying to clean off old discarded hard drives and condense everything onto a single larger drive, and it works great. Way more affordable than trying to buy drive bays or enclosures for all the separate drives that i only need to plug in for a day or less to clean them off.
Nlink
2024-11-14 11:55:56
Hasta el momento trabaja al 100% , yo lo uso para estación de discos y no estar abriendo y cerrando el gabinete.. y como clonador bien y rápido.. clona 500gb en aprox 40min. todo bien lo recomiendo, aunque si estarÃa practico que enviaran un instructivo en español ..
Recommended Products