Your cart is empty.
Your cart is empty.Product Description
The integrated water flow switch and water temperature setting can be quickly set up during installation.
Provide complete sealing accessories to prevent possible leaks.
Effectively balances internal water flow to evenly mix hot and cold water.
Brian
2025-08-30 10:34:57
As others have said, this is apparently the older style, which is what I actually needed for my nearly 20 year old shower.I don't see any leaking, and the knob now operates smoothly and precisely (as precise as a shower knob could be, I suppose).Ask me in 10 years if it's reliable. :D Actually, it'll probably be fine. It seemed to be as good as the original one was in terms of quality. Buying an original isn't really an option, since it's obsolete and only available from people with old stock who overcharge. I decided to take my chances on a new aftermarket part, and it paid off.I would recommend it.For anybody who is curious, I didn't have any leaking, and it did get hot and cold. The symptom was that the knob didn't turn as well (I didn't realize until I replaced it), and it was very difficult to get the temperature right. I would have to turn it all the way to the stop to get it hot, then turn it almost all the way back down to get it to a normal temperature. It was slowly getting worse over time, but got significantly worse a couple of weeks ago, which is what prompted me to look for a replacement. I wasn't sure if it was the valve or the PDU, so I did both.This part came with extra washers, so I picked the ones that matched the original (the smaller ones). It also came with a little wrench for adjusting the temperature stop. They also threw in a couple of squares of sandpaper, just in case, but I didn't do anything with the sandpaper.I did put some o-ring lube (from my swimming pool stuff) on the rubber washers, just in case. If nothing else, it helped hold them in place until I had everything back together.I was very happy that I didn't have to tear up the walls to get this job done.
ron
2025-08-24 11:10:54
Replaced original Kohler in less than 5 minutes. Works perfectly
carnod
2025-07-16 16:23:45
This is not a good product start to leak, only 1.5 month after it was insfalled. The valve does not work. DONOT BUY THIS PRODUCT BETTER TO GET THE REAL KOHLER VALVE KIT. WASTE OF MONEY!!!!.
Customer
2025-06-15 10:18:59
Very easy to install. Ensure shut off main water. If you're not that handy I would recommend take pictures from start of taking it apart and separate them, so that you can install the new one the same way how the old one was installed. Do comparing helps! And the good thing here there's no hot and cold side on the cartridge. The 2nd part for the on/off knob I would not turn anything until you put back the handle. By default it's set to off position. Very happy with this after market and save me a lot of money from breaking the wall and etc.
Martin Bullen
2025-06-08 18:07:28
Do not recommend. After 5 months of use it seems to have experienced an internal failure. The external handle position shifted, and the hot water flow progressively reduced over the course of a week until stopping entirely.There are no signs of external failure or contamination, and changing the temperature adjustment setting does not improve the performance.Seller contact information is all in Chinese, with no e-mail or other way to initiate correspondence, and Amazon is unable to assist.Do not recommend this item.
nesnakes
2025-05-14 17:12:07
Item Description: Hot/Cold water mixer that fits inside/behind the Kohler brand shower handles.Pros: The previous replacement, which was a Kohler genuine part, had failed. This worked nicely & was a relatively easy replacement.Cons: the 2 smaller O-rings that fit against the furthest most inside point, were too loose & fell off easily. Add some vaseline or lubricant to keep them in place. Problem solved! It also comes with a bunch of other O-rings that did not seem necessary but had me 2nd-guesting myself that I might have left something out. The instructions were not super clear. BUT alas.. no water leaking. Keep in mind that this is a medium-skill level repair. I am not a plumber BUT if you watch a YouTube video & have the right tools, you can do it.Suggestions to manufacture: noneWould I buy again or as a gift? Yes.. if this one fails, I will order again.Did I receive anything for this review? NO! I paid full price for this item.
Samantha Abney
2025-05-07 11:49:29
Great product easily installed. My bathroom shower would only dispense hot water this product fix the regulator and for a fraction of the price the plumbers wanted us to pay.
baltilion
2025-03-08 17:14:22
A few months ago I replaced a Kohler shower valve with genuine Kohler parts. This time around I used the generic valve for less than 1/2 the price, mostly due to shipping speed. Thoughts...1) Overall the shower valve works again, without drips or leaks. I do feel the full cold and full hot does not flow as well as before. Since you're unlikely to use full cold or full hot for a tub or shower this isn't an issue.2) I did notice that this generic valve seems to take a little more force to insert into the valve body and won't stay in unless it is held down with one hand while tightening the retaining ring with another. I did not recall having to do this with the genuine Kohler valve.3) This valve comes with O-rings, but the O-rings fall off due to gravity. I can't remember if that happened on the genuine Kohler part. I used a little bit of silicone grease (for plumbing fixtures), and that held the O-rings in place while inserting.Overall this valve does what it was supposed to do. Seeing as I got 8-9 years out of the original ones if it wasn't for shipping speed I probably have paid the extra $40 for genuine Kohler... just for peace of mind.
José Flores
2025-02-12 11:26:51
Excelente materialY seguroUn servicio super rápidoYa está instaloQuedo ExcelenteGracias
Mike
2025-02-04 14:04:52
fit perfectly without any issues. followed instructions and videos online. It's been a few months and still going strong! Better price than the "Big" brands
Ana Carolina Castillo Bustamante
2025-01-26 13:53:33
Yo compré dos de estas piezas y embonaron muy bien el la regadera! En vez de romper toda la tuberÃa solo compré esta pieza y pude reparar el goteo que tenÃa. Súper recomiendo si es compatible con su regadera.
Basile Ginis
2025-01-22 12:09:44
Fit nicely, exactly the same as the original item
Deryk vaccaro
2024-12-12 11:58:10
The media could not be loaded.
Recommended Products