Your cart is empty.
Your cart is empty.Protect the on Kohler products, always look for the Kohler genuine parts logo. Kohler genuine parts are designed by Kohler engineers to maintain original product performance and promote product longevity. The Rite-Temp pressure-balancing unit cartridge is designed to seamlessly retrofit existing shower valves for easy installation. It is built to withstand a greater range of water conditions and will provide long-lasting performance. Meets all required codes and standards.
Brien
2025-09-03 15:06:35
After watching a couple of YouTube videos, I found it easy to install the part. My "hot water only" problem went away. I wish I had considered contacting Kohler first because they're really good about sending free parts under their excellent warrant. I solved a minor drip with a warranty part.The videos don't always mention this step, but I chose to use a little plumber's silicone lube on the O-rings. I did see it in the written instructions from Kohler.
K Lieu
2025-09-01 15:23:10
I've had this installed for around two years already to replace a failing one, it's a pretty easy job to do with minimal tools required. You just need a screw driver, maybe a wrench depending on your setup, and some plumber's tape to be on the safe side. I found it to be cheaper on Amazon versus a big box store and you're getting a genuine part.
CeeBee
2025-08-14 19:52:55
Drops right in and works great. I had bought a cheap Chinesium knock off last year, and thats how long it lasted. So far so good with this OEM version.
Nonnie 1
2025-07-15 13:54:26
After getting some guidance from a wonderful rep from Kohler, I ordered this part. My shower was too hot and was not mixing in cold water . She diagnosed the issue and gave me the part number. It works, and now I can take hot or cool showers
TONY
2025-06-06 11:47:17
Nice genuine Kohler cartridge, still leak after I stall due to the gasket not big enough. I have to use the old gasket to cover the 2 holes . It works great. For the prices, it should come with round Flat gasket to stop leak, minus 1 Star for that.
Gabriel Lam
2025-05-31 11:16:45
Very straight forward. Instructions printed on the back of package clearly explain how to install. Wish everything was as easy as this.
Ben
2025-05-18 13:43:22
Would definitely recommend as a replacement Kohler cartridge for a shower valve. After moving into our house we found the shower would only ever run scolding hot. We had to set the temperature via the water boiler. After doing some investigation it appeared the old Kohler cartridge was faulty or corroded and cold water wasn't getting through. I purchased this cartridge along with a new mixer cap (Kohler K-GP77759), and fitted it in about 20 minutes (it was harder and took longer to get the old cartridge out, due to the lime scale build up). After turning the water back on and testing, the flow of cold water was back to normal, and we could control the temperature via the shower handle as normal.
DF
2025-05-07 14:44:33
Knock offs started leaking less than a year and I decided to go back with genuine Kohler parts.
Craig
2025-04-28 15:31:08
Perfect item that fixed as intended and shipping was fast.
Customer
2025-03-22 21:05:07
Was truly a factory part from Kohler and fit correctly into my Kohler unit. Now my hot water is consistently mixed!
Peter
2025-03-14 18:36:49
The shower faucet has been in use for about 20 years and became either all hot or all cold and jumped between when I tried to adjust. A youtube on a plumber website gave the part numbers for the internal bits and help on how to get the faucet apart. I found the parts on amazon and changed both the cap and pressure balancer at the same time. As described on the plumber site, this cap is different from the original.The hardest part of the installation was finding how the middle piece of the faucet is removed. It is just done by finger pressure. Put fingers on the middle part and turn it slightly. It just comes out. The pressure balancer looks different, but Kohler seems to give it the same part number. It all fit and was not that difficult. The shower is useful again. I only give it 4 starts because I do not think that it works like new. After I set a temperature and then get in the shower it makes changes as if it had a very slow lag. It is quite repeatable so I can wait longer for it to stabilize.
JoLLyShane
2025-03-13 19:29:34
It took me a month to install this product. Although I watched how to do it in Youtube, at first, I was still hesitant to install it because, I thought it would be complicated... I almost called a plumber. But it was a very simple installation.... I even learned to assemble and disassemble this product, using the old one that I replaced. As a matter of fact, the old one was not really broken... the leaking was caused by the displacement of the washer for the cold water and for the hot water not coming out all the time, it was the spring that was displaced. I cleaned the whole unit, greased the springs and washers and it's all good !! But of course, I am now using the new one. But this item... I think it is over-priced !!
H.S.
2025-01-28 15:49:59
A tub faucet started to leak. I thought the problem was the tub faucet itself, but water was actually coming out of the rough-in thread, so we replaced the shower valve, but water was still leaking. So we bought this pressure balancing cartridge to replace the old one, and finally the leakage stopped. Did the job.
Recommended Products
$48.99
$ 25 .99 $25.99