Your cart is empty.
Your cart is empty.Product Description
Marvelux 48" x 60" Rectangular Polycarbonate (PC) Transparent Carpet Protector for Low, Standard and Medium Pile Carpets
Manufactured from 100% pure polycarbonate, Marvelux polycarbonate chair mats are designed to provide the ultimate protection to low, standard and medium pile carpets. Polycarbonate is the toughest, most durable and reliable floor protection material, perfect for protecting your carpet!
Marvelux chair mats are manufactured in the United Kingdom, using the highest grade of pure polycarbonate. This means that our chair mats can be produced thinner, yet provide improved durability, rigidity and surface protection than thicker polycarbonate marketed chair mats on the market - often these are manufactured using plasticizers that ultimately creates an inferior product and requires the chair mats to be thicker, yet is less durable than Marvelux.
At Chair Mats Ltd, we offer a comprehensive range of chair mats for the home and office at outstanding prices. Whether you are looking for a budget or top of the range specification, we are committed to supplying our customers with the highest quality surface protection to make your everyday tasks that bit easier.
The Ultimate Carpet Protection
Without a chair mat carpets can easily become worn and severely damaged from chair wheels and castors. This can be expensive to repair and may even require you to replace your entire carpet.
The studded underside of our rigid polycarbonate chair mat has been expertly engineered so that the studs are an optimum length and shape to effectively keep the chair mat in place without damaging your carpet or underlay, while providing the ultimate protection to your carpet.
Chair mats with longer or sharper grippers not only pose a health and safety hazard, but over time will cause noticeable damage to your carpet and underlay.
Under the correct application and care this long-lasting polycarbonate chair mat will not curl, discolour, dimple or smell, and is highly crack resistant. You can rest assured that Marvelux chair mats will provide the ultimate carpet protection!
We recommend periodically adjusting your chair mat position to prevent the build-up of trapped dust and moisture which can occur in certain environments.
High Impact Strength for Ergonomic Gliding
Proven to reduce leg fatigue, our polycarbonate chair mats are ergonomically designed with a rigid smooth glide surface to provide easy movement, taking the strain off your back, knees and legs.
The lightly embossed yet smooth surface of the chair mat allows your chair to glide around effortlessly, but has sufficient grip to ensure controlled movement and prevent the chair from slipping and skidding, as well as protecting the surface from scratches.
Highly transparent and subtle, Marvelux chair mats blend seamlessly into any environment and the elegance of your carpet will remain visible whilst it is protected.
Chair mats with a completely clear and smooth surface will not provide sufficient grip and chairs can easily skid. They scratch and tarnish easily, providing an unattractive finish even through light use, unlike Marvelux chair mats that have been durably designed to stand the test of time!
Our Marvelux 100% pure polycarbonate chair mat is the most durable and reliable floor protection solution. Designed for light, medium and heavy use, it is the perfect chair mat for both home and business use.
This chair mat is specifically designed for low, standard and medium pile carpets (up to 1/2” thick, including padding). For carpet tiles and very low pile carpets, we recommend our PVC chair mats. For use on hard floors, you will require a chair mat with a smooth back.
- Please note: Production tolerances +/-5%. Measurements rounded to nearest inch.
Suitable for low, standard and medium pile carpets (up to 1/2").
The studded/gripper side of the chair mat is designed to be placed onto the carpet so that it holds the mat in place without damaging your carpet and underlay. Please note: the degree of "stay-put" will vary depending on the weave structure of your carpet.
- Easy to clean
- Suitable for underfloor heating
- Sound absorbent
- Extremely durable polycarbonate
- Highly crack resistant
- Effective carpet protection
- Rigid smooth glide surface
- Designed for light/medium/heavy use
Our polycarbonate carpet chair mats are available in rectangular and lipped shapes. We also supply chair mats for carpet tiles, plush pile carpets and hard floors.
Our small size chair mats (30” x 48” and 36” x 48”) are shipped flat and our larger sizes (47" x 53", 48” x 51” and 48” x 60”) are shipped rolled.
Once unrolled, polycarbonate chair mats should revert to their flat state almost instantly.
To ensure that you receive a genuine Marvelux polycarbonate chair mat, please ensure you buy from Chair Mats Ltd. This item will be shipped flat.
Joey Lee
2025-05-19 11:15:40
I put this mat in a small area where I have a computer/accessories wood work station. There are walls at the back and both sides. I have base board at the bottom of the walls. This mate measures 471/4 X 53 inches (at least mine did).I laid the mat on carpet and it was approx.1/8 inch from either side wall and touching the back wall. I then installed a wood molding on the mat at the bottom of the baseboard on the three walls. The mat will not move. It looks very nice and seems to be extremely sturdy. I cannot attest to durability since I have not had it down very long.I am approx. 210-215 lbs and that (with the chair) leaves an indentation in the mat but doesn't last. The mat is not very thick but has the "spikes" on the back to hold in the carpet.I would like to comment on the mat when received. It was in a box rolled up as some other reviewers have stated. And as others have said it will try to go back to it's FLAT condition when the securing wrapping is released/cut. It would be best to have someone help at this point but if you are like me-don't want to ask anyone for help unless absolutely necessary. If the wrapping is cut and there is nothing else holding it in the coiled condition it WILL open up with a LOT of force and could possibly cause harm.This is what I did: Took a rope and made a small loop in one end and placed the other end through that loop making a lasso. Before the mat wrapping is cut any-place the rope around the mat approx. in the middle. Look to see how the mat will open when the wrapping is cut. Tie the other end to some stationary hold down point. I did this in the yard (didn't have room in the garage). Then start slowly cutting the plastic binding from one side with one hand and hold the rope in the other hand. As you cut the binding the mat roll will start to open-give it a little slack by pulling the rope towards you an carefully relaxing to let it slowly open. It may jerk but if you have it tied down it cannot open fully. Then start cutting the wrapping from the other side from where you started and cut toward the middle. It will only open so far then you can pull the rope toward you and relax for slack until it is fully opened. I left it in the sun and it will take a while to get back in a complete flat condition but not long. Hope this helps others out there.This is a very good item and I highly recommend it.
B
2025-03-14 21:27:53
I've had this mat for a little more than 1 year and it's already breaking and cracking from where my desk chair wheels sit. It's a strong and durable mat but not for anyone who regularly sits at a desk for (I'd say) 8 or more hours a day (IE: You work at home, like to game, etc.). I'd be curious to know how thick or thin the carpets of most of these 5-star reviews are and how many hours they spend at their desk, but in my specific case, I have carpeting that is about roughly 1/4 inch thick (give or take) and almost immediately in a few days noticed dipping in the mat (which then lead to the cracks/breaking of the mat). I should also note that the fragments can fly off due to how the material is and can have some decently sharp edges if you have small children/newborns.All-in-all not for me, at least not at this price point. I could've gotten a desk mat for half the price at Walmart which would've lasted me roughly the same amount of time which is honestly disappointing considering I was looking mostly for something that would last a long time.I will say though, if you don't sit at your desk for long periods, this mat could be worth it for you, it all just depends on what it is you're looking for. Also, understand this is just my one experience and I may not have the same environment as you (temperature, carpeting thickness/type, etc.), but I hope this is helpful for someone!Update: I ordered a follow-up mat once mine became unusable in hopes of maybe partnering it with an office carpet on top to make it last longer (I'm a lost cause), but before I could even order myself a carpet (within a couple weeks of having it), it LITERALLY started to crack and break once again... I want to emphasize this product is $110 and started failing in W E E K S.. ðŸ˜
Boston area literary scholar
2025-01-13 13:33:16
I just received and installed this rectangular carpet protector. As a consequence I cannot comment on durability yet, but I suspect it will hold up. Please be aware in my comments below that my standards for purchases are high. Nevertheless I have assigned 5 stars, for now. It comes rolled up, but surprisingly it lays flat immediately. There's no waiting for it to flatten out. Some things that come up in other reviews are worth commenting on. Yes, it springs open, or can, when you cut the band that has kept it rolled up. My strategy was to put two cinched men's 36" leather belts for pants on either side of the band, fastened at their last notches. That stopped the spring soon after I cut the band. Then I removed one belt, causing a restrained spring on one side, and stepped away to remove the other. The pad sprang open fully but in a controlled way. As someone comments, the size is not a full 48"x60". Mine is 47.25x59. Good enough for my situation but maybe not everyone's. It's very close to the full size. A few people mention that their protector moves around. Mine does not. The round teeth on the underside are .4 cm, about 1/6th of an inch, with tapered ends. They are digging gently but sufficiently into my low nap carpet for the pad to hold firmly. There is no slippage when I roll back along the long axis and turn 90 degrees to work at my second desk. My carpet is quite thin. How it would hold on a thicker carpet, I can't say. I weigh 195 lbs; my desk chair is an old Herman Miller arm chair, heavier than the ergonomic chairs they are selling now and heavier than many current desk chairs. The roll along the surface is slightly bumpy, not absolutely smooth, probably because of the substantial weight of me and the chair and because the pad is flexible rather than solid and unbending. The functionality is certainly good enough. Whether the pad is both thick enough and of the right material to be durable remains to be seen. I'm happy to have it. I'm glad that I paid the extra cost for something this substantial.
cecilia alexander
2024-12-28 18:31:55
It protects my carpet.
James
2024-11-26 11:25:28
This worked great until it cracked under one of my chair wheels. It felt thick and durable enough for daily use but couldn't stand up to my heavy chair. For what it is I don't understand why it costs so much.
Recommended Products
$39.89
$ 19 .99 $19.99