Your cart is empty.
Your cart is empty.Product Description
The Massca Twin Pocket Hole Jig Set is designed to allow the accurate drilling of side-by-side pocket holes on both new projects and repairs. Its unique magnetic quick adjust system makes setting up the jig a rapid and simple operation, without doubt one of the simplest and most efficient pocket hole jig systems available today.
Whether you're a beginning woodworker, expert carpenter, or hobbyist at heart, the Massca Twin Pocket Hole Jig is the perfect tool to help you get started on your next project. The Massca Twin Pocket Hole Jig is a versatile tool that features an adaptable base system to help you measure the correct thickness of your wood with ease. This set comes complete with a jig, drill bit, stop collar, and hex key.
Specs & Features
Built-in Measurements
No marking out is required when using the Massca Jig. This pocket hole jig features a built-in workpiece thickness, drill depth setting, and set-up gauge for rapid checking of dimensions, fast operation, and quick drilling of joints.
Complete Set
Perfect for joinery carpentry and do-it-yourself woodworking projects. This set comes complete with a Massca Twin Jig, drill bit, stop collar, and hex key.
Magnetic Base
Thanks to its unique, magnetic quick-adjust base system, the design of the Massca Twin Pocket Hole Jig provides rapid and simple operation to make it one of the fastest and easiest jigs on the market. Magnetic base works great with any metal clamp.
Hardened Drill Guides & Wood Chip Relief
Our Massca Twin Pocket Hole Jig features a hardened steel center and wood chip opening to prevent blow out, reduce tear out, and ensure a long life.
Home Improvement Made Simple
The Massca Twin Pocket Hole Jig is the perfect tool for creating pocket holes with ease. Our tool was crafted for straightforward operation when creating STRONG and DURABLE pocket hole joints.
Clean Pocket Hole Cuts
The pocket joint involves accurately pre-drilling a pilot hole at an angle between two boards before connecting the two with a screw. Our Massca Pocket Hole Jig will make this process simple, keep measurements exact, and achieve beautiful looking pocket joints.
For New Projects Or Repairs
Use our pocket hole jig to create perfect pocket holes for new projects or to repair wood joints. It has a dual-setting to ensure accuracy for every type of project.
Perfect for:
- Woodworking Beginners
- Carpentry Experts
- Tradesman
- DIYers
- Handymen & Handywomen
- Project Enthusiasts
Massca Twin Pocket Hole Jig Set
The Simple Joinery Tool
Use the Massca Twin Jig to create custom carpentry build-ins or for any do-it-yourself projects. Our pocket hole jig is also a go-to tool for home improvements and repairs.
- Easy-to-use & simple operation.
- Designed for use with timber from ½"- 1½" in thickness (13mm- 38mm).
- Dual end-piece setting for repairs or new projects.
- Magnetic base works with any metal clamp.
- Built-in workpiece thickness, drill depth setting, and set-up gauge.
Perfect For DIY Projects Like These:
Bar Stools
Entry Way Benches
Night Stands & Head Boards
Desks
Decor Ladder
Bedroom Bench
Bob B.
2025-07-23 10:02:31
I had a 2 holed Kreg jig that my wife got me for Father's Day in 2009 or 2010. It had worked great, with me getting new drill bit and driving bit, but it finally gave out accurately drilling the proper depth by holding the measurement as I drilled. Very good product. However, after apprehensively considering a new product with price point and the magnets, this one is easier to use and measure the wood depth. I really like it. If you get a deal on Kreg get one, they make great products, but with me the Massca seems more user friendly and doesn't rely on the push sides to get the right depth but the magnets. Seems better quality, but time will tell if it lasts as long as the Kreg??? Hope this helps.
Brian G
2025-07-17 15:30:25
It's as good as the Kreg of the same design, However, it has easier to adjust depth settings and offsets. however on use, it does need to have the chips knocked out of it after each hole (or pair of holes) that you drill - That is where I discovered it'd be nicer if it had a way to really lock in the adjustment as after tapping out the chips, the offset adjustment slipped out of place and my next 2 holes were way too deep- - I had to plug them and re-drill new holes offset from the first ones - My fault for not checking, but one assumes... But once you're aware of that it is easy enough to correct that problem, and if you never use any other offset (such as only ever using 3/4" thick material) you could of course glue or tape the adjustment in place. Chip ejection isn't as good as my single-hole kreg does, so it gets clogged with chips that have to be cleared out each time (not a big problem, just a minor annoyance)
J Norman
2025-07-06 11:55:17
Well priced and well made, this is a great little tool that's adequate for my 'average' skill.
Bette & Frank
2025-07-01 09:43:00
This pocket hole jig worked to a "T".
Michal
2025-06-13 17:20:53
As a DIY newbie, I always struggled with drilling straight, precise holes—until I got this drill hole jig! It’s super easy to use and made a huge difference in the accuracy of my projects.The jig holds everything steady and helps me drill straight every time. No more wonky holes or measuring multiple times! It’s adjustable, so it works with different drill sizes and materials, which is a huge plus.The build is solid, and it's really durable. Plus, it saved me so much time—what used to be a stressful step in my projects is now quick and painless.Definitely recommend this tool if you want to save time and avoid mistakes!
Sahara
2025-06-05 15:28:39
It might just be my inexperience, but I could NOT understand the instructions on this. I did some googling and thought I figured out how to use it. Confidence was still fairly low though. But I went ahead with it. I had to use a clamp to hold it down to the wood, because otherwise it just moved all over the place. So that was a pain. I wish I'd purchased the Kreg jig instead. But this was less expensive, and I'm happy to report I did successfully completed my project. Just with some added frustration and confusion.
John Roberts
2025-05-18 14:13:07
Watch a couple videos on YouTube of the more expensive pocket hole jigs,was kinda skeptical about using a more simple model. This Messca model,once I made a few practice holes is very easy to use.Very satisfied
Eric Gray
2025-05-07 13:53:34
I was very satisfied with this tool but you will need to use a clamp with it. the tool worked great other than that. Can't wait to use it on more projects
Fernando
2025-04-29 10:10:30
The media could not be loaded.
j hayes
2025-04-19 12:28:05
Does the job well
Cliente
2025-04-06 11:35:20
Algo confuso al principio. Funciona tal como se esperaba.
Nihal
2025-02-14 13:51:26
Easy to use
Recommended Products