Your cart is empty.
Your cart is empty.The 3″ bench clamp is perfect for pocket hole joinery, project construction, general clamping, drilling, routing, cutting and more. The clamps can be mounted to most clamp tracks on the market, work benches and even drill presses with complete 360° rotation.
Engineer
2025-08-29 15:54:59
Its well built, sturdy and value for money. It has a nice crank you close the clamp slightly and turn the crank a bit thightens well and reverse for soft opening. One can use the lever like normal vise grip too. In my experience it is better than auto type with more than twice the price! The bolt underneath is 5/16-18.
John phillips
2025-08-15 12:49:52
Purchased with the bench base kit. Clamps work great when you need them, then slip off and store out of the way. Gives you full use of your bench.
M. Smith
2025-08-03 13:16:14
had to modify the bolt to easily attach it to my drillpress but works great.
Gary R Corbello
2025-07-21 16:54:29
LOVE THE ADJUSTABLE CLAMP PRESSURE FEATURE, MADE WELL, WORKS FINE
Elwood
2025-07-03 14:04:42
This clamp is large and sturdy. Unfortunately, I didn't read the description closely enough. I was expecting a self adjusting clamp and this isn't that, so I sent it back.
Dennis
2025-07-02 21:15:08
I have a tool that came with screw-down clamps in T-tracks. The clamps were difficult to maneuver and tighten. I purchased the Milescraft clamp as a replacement and it is working great. My production time is probably half or less compared to the time I spent working with the screw-down clamps. I highly recommend the Milescraft clamp.
Jorge Flores
2025-05-04 16:20:49
Great alternative to kreg
Timothy S. Smith
2025-05-03 12:41:44
It looks like a pair of vice grips on steroids adapted to a T-Track. And basically it is.I attached 3 tracks on my 48" x 60" work table. I have a thick layer of teflon on top over 1/2". I cut it carefully into 5 pieces, and ran the t track in the 3 slots now provided and attached it all very securely to double 3/4 inch table top. I ran machine screws with t-nuts all the way through work table for the track which has pre drilled countersunk holes every 12" the included 1/2" wood screws were not used.. Making sure the screws would fit nicely and not protrude to interfere with the tool sliding.First issue the bolt designed to slide in this track at the bottom of the tool has a rounded head. it barely clears the track and any slight bump in the road cases problem so I had to introduce these sliding bolts to mr belt sander. this was acceptable at first and then I purchased a 50 pcs bag of sliding t-bolts that are flat and have no driver imprint, the bolts included have a nice socket head and even a pre application of blue thread lock, what a waste. the tool must rotate back and forth a bit and the depth it was screwed into the tool was too deep for my application. After that slight upgrade to the tool. Now only one complaint left. It seems many clamping tools from china have a nice plastic or rubber cover to help prevent scratching of the item being clamped, this piece falls off easily. I notice this long ago. My solution a drop of super glue on the rubber cover and re attach and it stays in place other wise it ends up on the floor and eventually lost.
Luciano T.
2025-04-19 21:23:58
Solid item, only downside is that thread on Alan screw is not metric otherwise it will do nicely
Fernand
2025-03-23 16:11:13
Pour le banc de travail c'est bien
Dr. Andreas Klein
2025-01-10 17:40:45
Sehr gute Klemmen für den Schiebe- oder Frästisch, die auch nach Fracht und Zoll immer noch deutlich günstiger sind, als die heimischen Angebote. Zumindest wenn man an der Maschine stabile Führungsschienen hat.
miguel angel hernandez becerril
2024-12-29 14:53:42
es el complemento ideal de Milescraft 4016 BenchLock - Base de abrazadera de banco, Negro y es del tamaño ideal de mi banco de mesa
Schwarz Erika
2024-12-05 17:33:25
Hab schon einige Klammern, sie funktionieren und sind auch gut und hochwertig verarbeitet …absolut empfehlenswert !!
Recommended Products
