Your cart is empty.
Your cart is empty.Product Description
Motion Sensor and Light Sensor
PIR Motion Sensor for Indoor/Outdoor with Wireless Plug
Bring your home to life as soon as you enter a room. Control lights, devices and entire scenes via movement.
Smart Adjustment
Parameter Adjustment Knob
The arrow points to the working mode with different parameter selections. Please use the paddle tool from the package to switch carefully.
Delayed Adjustment
You can set the detected duration, 3s, 10s, 30s, 1min, 3min, 5min, 10min, (The default is 3s).
Light Sensor Adjustment
This can be set to Available for all day, low light or dark, the default setting is all day.
Detection Distance Adjustment
- Near：0-13FT
- Mid：0-26FT
- Far：0-39FT
- (The default is 0-26FT)
Papaya
2025-09-03 16:10:37
Affordable, easy to set up and works well. Motion sensor is very sensitive and would trigger the alarm as soon as the slightest movement is detected. I attached it to an alarm siren.Update: It was working well like I had mentioned above. As of 1-25-24 it was not working as it should be working. The alarm would go off as soon as it was turned on and wouldn’t stop until the power was turned off. I found one customer had the same problem of alarm going off without any motion detected. Like others said it would work for the lights but not for the alarm definitely.
D.L.
2025-09-01 13:45:04
Mostly worked for a few months, now only as an off/on switch using the button on the back.
Papaya
2025-08-13 14:09:25
Affordable, easy to set up and works well. Motion sensor is very sensitive and would trigger the alarm as soon as the slightest movement is detected. I attached it to an alarm siren.Update: It was working well like I had mentioned above. As of 1-25-24 it was not working as it should be working. The alarm would go off as soon as it was turned on and wouldn’t stop until the power was turned off. I found one customer had the same problem of alarm going off without any motion detected. Like others said it would work for the lights but not for the alarm definitely.
D.L.
2025-07-04 11:41:17
Mostly worked for a few months, now only as an off/on switch using the button on the back.
TT
2025-06-15 13:15:17
Added this for a quick and easy overhead light in a storage area. Love how easy it was to set up and use. Now I always have light when I need to find something in that space. The settings dials are small so I used my phone to enlarge the image.
Josue C.
2025-06-07 10:43:34
It's decent, love that it has a magnet onto he mount. Sometimes it does not read accuraatly, but it still a good product
King Lerch
2025-05-31 16:17:34
The great thing about this motion detector is that there really aren't many others out there. If you have a driveway light that is far away from where you need to sense motion, or you want more control without hiking up a ladder...there's nothing else, so thankfully there is this model.I messed up the pairing (my fault) so I can confirm that re-paring is super easy and fast. I also tried each setting. There is one for sensitivity, one for time to stay on, and one for how dark it should be to turn on. They all work exactly as in the manual, though not a great design, with three pots you have to guess exactly where they are set. But they are easy enough to test, or pop open the unit later to adjust if needed.The problem is that despite the sensor being close to the plug, having plenty of power, and all settings correct - it's just unreliable. In test mode, where you can constantly wave your have in front of the sensor, the red light blinks showing that the light should go on each time, but it just doesn't. I found that the first time it will work, but repeated attempts shortly thereafter, the receiver simply does not respond to the motion.I went with a hardwired option and it works much better, which is actually a bit of a shame because this unit is otherwise a great idea and quite a nice design.
Anthony G
2025-05-30 18:30:39
Installed this in my basement where I have to light switches. I wired up my 3ft led light strips around the room. As soon as I enter the lights turn on. I have them set to five mins, but as long as your still moving around the room the lights stay on.
L-Con
2025-05-21 15:33:58
I needed an outdoor motion sensor/wireless plug setup for my driveway. This was the only viable option I could find, that checked all of the boxes (or, so I thought). First off, the range between the sensor and plug is pretty short. I can’t get it to reliably work, if the sensor is more than 25’ away from the plug. Ok, no problem. I’ll find a way to make that short range work for me…. Upon opening the sensor to install the batteries and adjust the settings, I noticed that there is absolutely no preventative measures taken by the manufacturer to prevent water intrusion. The description states “ip54 ratedâ€, and that it’s suitable for outdoor use. The instructions state that it cannot be used in humid or hot environments…. This is contradictory to the “outdoor use†statement in the description. I have sealed up the sensor as well as possible, so hopefully rain won’t affect it, but there were gaps, cracks, and openings in the housing that wouldn’t stop a single “splash†as described when you research the ip54 designation. The description is extremely misleading, and borderline fraudulent, imo. For the price and quality of construction, I don’t expect this to last long, but I definitely won’t be purchasing another, when this one fails.
Kevin Barr
2025-05-18 11:12:34
UPDATE 01/06/24- I wish I could give this 0 stars. After finally getting so-so reliability with it as described below, it now will turn on the outlet once, never turn it off until I manually turn it off with the outlet button (which I discovered by accident since not in instructions). Then it will not turn on again unless I remove and reinsert batteries, then it will work again ONE time same as before. It does pair auto when replacing batteries (again guessing because bad instructions but outlet led starts solid blue not blinking blue, then it does work one time again). RETURNING IT after MUCH frustration. Will not try another brand of same item because of other bad reviews. It never got wet and batteries are new alkaline...first few days was ok MAYBE, because I didn't know the flaws yet, but now is all bad all the time. sometimes the pir will sense motion well and the led on the front will blink, but frequently it will not sense at all, even up close. Sometimes when it does sense the outlet will turn on, sometimes the pir will sense but outlet will not turn on. The time setting is part of the pir, not the outlet. This means if the pir successfully turned the outlet on, then the pir sends the signal to turn off later, the outlet may not turn off. It may be many hours later before a pir signal successfully turns the outlet on or back off.There are many brands on Amazon selling this exact item, with the same confusing instruction sheet. There is no information about what the different colors of the led on the outlet mean, and it is not clear if removing the batteries is part of the re-pairing procedure or just confusion caused by mixing re-pairing and initial setup info in the same sentence. This brand was the only one that mentioned any water resistance feature for the pir, but when I received it and put the batteries in I did not find any kind of gasket that would make me think it could resist any rain at all.To get semi-reliable performance from this thing I had to mount the pir on the outside of my window (under an awning so it never gets wet) and move the outlet to an extension cord mounted just inside the same window, which looks bad.
TT
2025-04-12 14:50:01
Added this for a quick and easy overhead light in a storage area. Love how easy it was to set up and use. Now I always have light when I need to find something in that space. The settings dials are small so I used my phone to enlarge the image.
Josue C.
2025-04-01 11:51:32
It's decent, love that it has a magnet onto he mount. Sometimes it does not read accuraatly, but it still a good product
King Lerch
2025-03-29 20:11:37
The great thing about this motion detector is that there really aren't many others out there. If you have a driveway light that is far away from where you need to sense motion, or you want more control without hiking up a ladder...there's nothing else, so thankfully there is this model.I messed up the pairing (my fault) so I can confirm that re-paring is super easy and fast. I also tried each setting. There is one for sensitivity, one for time to stay on, and one for how dark it should be to turn on. They all work exactly as in the manual, though not a great design, with three pots you have to guess exactly where they are set. But they are easy enough to test, or pop open the unit later to adjust if needed.The problem is that despite the sensor being close to the plug, having plenty of power, and all settings correct - it's just unreliable. In test mode, where you can constantly wave your have in front of the sensor, the red light blinks showing that the light should go on each time, but it just doesn't. I found that the first time it will work, but repeated attempts shortly thereafter, the receiver simply does not respond to the motion.I went with a hardwired option and it works much better, which is actually a bit of a shame because this unit is otherwise a great idea and quite a nice design.
Anthony G
2025-03-04 16:19:24
Installed this in my basement where I have to light switches. I wired up my 3ft led light strips around the room. As soon as I enter the lights turn on. I have them set to five mins, but as long as your still moving around the room the lights stay on.
L-Con
2025-03-02 16:52:08
I needed an outdoor motion sensor/wireless plug setup for my driveway. This was the only viable option I could find, that checked all of the boxes (or, so I thought). First off, the range between the sensor and plug is pretty short. I can’t get it to reliably work, if the sensor is more than 25’ away from the plug. Ok, no problem. I’ll find a way to make that short range work for me…. Upon opening the sensor to install the batteries and adjust the settings, I noticed that there is absolutely no preventative measures taken by the manufacturer to prevent water intrusion. The description states “ip54 ratedâ€, and that it’s suitable for outdoor use. The instructions state that it cannot be used in humid or hot environments…. This is contradictory to the “outdoor use†statement in the description. I have sealed up the sensor as well as possible, so hopefully rain won’t affect it, but there were gaps, cracks, and openings in the housing that wouldn’t stop a single “splash†as described when you research the ip54 designation. The description is extremely misleading, and borderline fraudulent, imo. For the price and quality of construction, I don’t expect this to last long, but I definitely won’t be purchasing another, when this one fails.
Kevin Barr
2025-01-19 11:40:35
UPDATE 01/06/24- I wish I could give this 0 stars. After finally getting so-so reliability with it as described below, it now will turn on the outlet once, never turn it off until I manually turn it off with the outlet button (which I discovered by accident since not in instructions). Then it will not turn on again unless I remove and reinsert batteries, then it will work again ONE time same as before. It does pair auto when replacing batteries (again guessing because bad instructions but outlet led starts solid blue not blinking blue, then it does work one time again). RETURNING IT after MUCH frustration. Will not try another brand of same item because of other bad reviews. It never got wet and batteries are new alkaline...first few days was ok MAYBE, because I didn't know the flaws yet, but now is all bad all the time. sometimes the pir will sense motion well and the led on the front will blink, but frequently it will not sense at all, even up close. Sometimes when it does sense the outlet will turn on, sometimes the pir will sense but outlet will not turn on. The time setting is part of the pir, not the outlet. This means if the pir successfully turned the outlet on, then the pir sends the signal to turn off later, the outlet may not turn off. It may be many hours later before a pir signal successfully turns the outlet on or back off.There are many brands on Amazon selling this exact item, with the same confusing instruction sheet. There is no information about what the different colors of the led on the outlet mean, and it is not clear if removing the batteries is part of the re-pairing procedure or just confusion caused by mixing re-pairing and initial setup info in the same sentence. This brand was the only one that mentioned any water resistance feature for the pir, but when I received it and put the batteries in I did not find any kind of gasket that would make me think it could resist any rain at all.To get semi-reliable performance from this thing I had to mount the pir on the outside of my window (under an awning so it never gets wet) and move the outlet to an extension cord mounted just inside the same window, which looks bad.
Recommended Products