Your cart is empty.
Your cart is empty.Matthew R
2025-08-23 13:19:55
I have tried many sets of casters or wheels for my chair. (more on this later) These are the best so far. They roll very smoothly and are very quiet. They look good too but how often do you look at the rollers on a chair anyway. The perfect combination of quiet and smooth without changing the chair height. The most important thing for me that it doesn't want to move around when you intend to stay still.If you are interested in my comparison with other rollers, here it is:I switched from carpet to LVP (Luxury Vinyl Plank or fake hardwood) recently and that is what made me look for new rollers. I had replaced the rollers with the roller blade style single wheel rollers years ago. Those were ok on carpet. On LVP however the chair wanted to roll away before I could sit on it. Even putting my feet on a foot rest would push the chair back when I didn't want it to. Those roller blade rollers were quiet and smooth but they lifted the chair up a bit. I believe the additional height led to bad habits like putting my feet on the base of the chair. (and eventually foot pain)I tried my original plastic rollers that came with the chair and those sounded like they were going to scratch the floor. (they weren't going to, it just sounded that way) I missed the smooth rolling quiet feel of the roller blade rollers but I wanted something that would stay in place a bit better.I put these rollers on and decided immediately that they were an upgrade and the best of the bunch. The chair rolls nicely but it doesn't feel like the chair wants to move on its own. I can glide across the floor if I am too lazy to get up to get to the trash can.The price is reasonable and the upgrade is significant. I can't say how these would work on carpet. They are softer and grip more than plastic. They might be difficult to move on carpet unless you have a hard surface mat. I highly recommend them for hard surface flooring though.
Jim W.
2025-08-10 18:50:33
Quick, easy and inexpensive replacements for two rolling chairs bought in 1984. My chairs are now fully restored with a satisfactory rolling capability.
RB
2025-08-06 17:33:41
I recently got a new office chair that came equipped with the standard 2" double plastic wheel rollers. The chair did not roll or pivot easily on my rug so I investigated the various rubberized bearing wheels for replacement. These are similar to roller blade wheels but are the double wheel 2" style replacements and not the single wheel 3" roller blade type. I chose the 2" replacements because I did not want to raise the height of the chair.I selected this style for several reasons: (1) the wheel bearings and polyurethane treads should make rolling quiet and easy, (2) the solid urethane wheel should be more durable than a plastic wheel with an outer urethane tread; reviews of such styles sometimes noted that the tread would separate from the plastic wheel, and (3) the roller blade style wheel has a narrower contact point than styles with a flat tread; many reviews of the flat tread design noted that the wheels did not pivot easily and I believe this is because the flat tread wheels have a lot of contact area against the floor whereas the narrower roller blade wheel type should have less contact area with the floor which should result in lower friction to allow the narrower wheel to pivot more freely.I have found that these wheels easily pivot and roll on the rug installed in my office. I am very satisfied with the performance. Note: I selected the color based on it being the cheapest option but the color does not stand out when installed on the chair. The color is that of the supporting structure within the transparent polyurethane wheel. The transparent polyurethane is most obvious and the interior color does not appear very noticeable from the outside. Just about any color will likely work for most decors.
GV
2025-08-03 12:59:38
Got these to replace the original wheels on my desk chair to protect my wood floors. The wheels are so smooth and quiet! Easy to install, have been great on my wood floors
Texas50BMG
2025-07-24 12:25:10
I am a mere 280 lbs. and have tried several different brands and designs of "executive chair" casters. These have proven to be the most satisfactory in regard to moving freely with or without a load on them.Worth the price.Add on comment: After insalling all 5 casters on the disapointing, "East Asian" manufactured, executive chair I ordered from Amazon a while back, I noticed that the wheels did not roll as well as the old set I have on my older chair. After inspection, I found each to be packed with long, auburn people hair around the axels. Understanding that it was a "warehouse deal", I was not surprised but, being the causious type of Old Boomer that I am, I deloused the 5 wheel assemblies before reinstalling. The casters work fine and look like 'new" if you don't breakout the microscope!! LOL!
owbro
2025-05-01 13:27:27
They roll smoothly and the guard on them keeps them from scratching my leather shoes.
Momkat
2025-03-23 13:30:51
These wheels are superior to the ones that were originally on the chair.
Janice Gochnauer
2025-03-08 15:51:10
These glide!!!! Easy to install. No more getting stuck in ruts.
Dylan Imanol Castro Juarez
2025-02-07 15:51:44
Muy buena calidad y fácil de instalar
Nadim El Awar
2025-01-21 15:03:15
Elegant and very reliable.
Customer
2025-01-19 13:49:31
I purchased these casters as replacements for my Knoll Generation chair. I was pleasantly surprised at the ease in which they installed and their quality. They do not have any branding on them and are black so they fit in seamlessly with the chair and also roll very smoothly on hard wood.
Turki
2025-01-08 11:55:01
الكرسي ØÙ‚ÙŠ كان قيمنق وماكان يمشي اذا ØØ·ÙŠØª ØªØØªÙŠ ÙØ±Ø´Ù‡ لان Ø§Ù„ÙƒÙØ±Ø§Øª بلاستيك وتعلق بس ذي رهيبه بس لازم تتاكد ان الكرسي ØÙ‚Ùƒ يمديك تشيل Ø§Ù„ÙƒÙØ±Ø§Øª ØÙ‚هوبعد ما ركبتها صار ÙŠØªØØ±Ùƒ بسرعه مو مريØÙ‡ Ùوق السيراميك لكن Ø§Ù„ÙØ±Ø´Ù‡ مرا كويسه السرعه ومايزØÙ„Ù‚10/10
Cavan
2025-01-07 11:06:30
3 out of the 5 wheels where broken within 8 hours of use, they where not abused or miss treated etc. While the wheels seem good the plastic body the mounting studd is embedded in is single layer thin and weak plastic as shown in the pics
Recommended Products