Shopping Cart

Your cart is empty.

Your cart is empty.

Pattern Flush Trim Router Bits 1/4 Shank, Bottom Bearing Pattern Router bit Set, 1/4 Flush Trim Cut Router Bits, Handy, Durable & Sharp for Home DIY

4.9 (10) Write Review
Free shipping on orders over $29.99

$17.98

$ 8 .99 $8.99

In Stock

1.Style:Edge Trimming


2.PatternName:Flush Trim Router Bits (plus)


About this item

  • ✅ Cutting height in 1/2”, 3/4”, 1”, 1-1/2”.
  • ✅ Allows you to create identical and consistent shapes from multiple template workpieces with accuracy and ease.
  • ✅ Enable to cut complex and intricate shapes that would be difficult or impossible to cut by hand or with other tools.
  • ✅ for different types of cuts such as flush trimming, pattern cutting, rabbeting, mortising, or dadoing.
  • ✅ for different sizes and shapes of templates or workpieces such as straight, curved, round, or irregular.
  • ✅ for different types of joints such as butt joints, miter joints, lap joints, or dovetail joints.
  • ✅ for different types of finishes such as paint, stain, varnish, or lacquer.
  • ✅ for different types of materials such as Woods, MDF, laminate, particleboard, plywood compact panel, acrylic, veneer, plastic, etc.
  • ✅ for different types of routers such as handheld routers, table-mounted routers, or CNC routers.
  • ✅ Improve the quality and appearance of your workpieces by giving them a smooth and precise edge. Reduces the need for sanding or filing after cutting, saving you time and effort.


Product Description

ZokMok Bottom Bearing Pattern Flush Trim Router Bits Set (Dark Green)

head

Applicable Project Materials
Applicable Project Materials

Suitable for Woods Like: MDF, laminate, particleboard, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.

  • MDF
  • Soild Wood
  • PlyWood
  • Acrylic
  • Medium and low density Project

ZokMok Bottom Bearing Pattern Flush Trim Router Bits Set (Dark Green)

4pcs Carbide Flush Trim Router Bits

The flush trimming bit has 2 regular blades that can be especially handy in a router table so that the template runs on the bearing allowing you to cut with the grain smoothly and prevent tear-out.

  • Cutting Edge Material: ZokMok Carbide (Updated with New High strength Bearing)
  • Color: ZokMok D-Green
  • Shank Dia. 1/4‘’ (6.35mm)
  • Bearing Dia. : 1/4" & 5/16" & 3/8" & 1/2" (6.35mm & 8.00mm & 9.50mm & 12.70mm)
  • Cutting Length:1/2” & 3/4” & 1'' & 1-1/2'' (11.9mm & 19.00mm & 25mm & 38mm)

KA
2025-08-16 12:31:11
These bits arrived nicely packaged in their own little plastic tubes and then within a cardboard box. They even supplied several extra replacement bearings and set screws with the set. The bits themselves look to be well made.I have not had the time to actually use them yet, but see no reason why they wont preform as hoped.For occasional amateur woodworking, these will do just fineUpdate...I have been using these router bits in my cordless 1/4 inch router for a few weeks. They work very well. They seem sharp and accurate and cut through hard maple and cherry with littke effort. These are a real bargain.
Unkopidr
2025-06-15 10:22:46
I decided to install my first pocket door and one thing I quickly discovered after tearing into the wall and buying a slab door was the need to make some jigs and rout for the handle and pull hardware.Despite my collection of over 36 router bits, a number of which I have never used, I didn't have any of these - flush bits with a guide wheel at the shank instead of the tip. This turns out a perfect collection for pocket door hardware, and the assorted sizes - I thought them a little overkill - turned out to be a godsend as I used three or them for this one small project.I did a couple of test cuts on scrap and it's a good thing I did, just to get used to using these for two depths (shallow on the outside and deep on the inside). To my surprise, I found it better to cut the smaller, deeper cuts first so I could get a better site on clamping my jig for the next wider, shallow cuts.These came sharp sharp, each in a nice and secure little clear case. Deep shanks for good purchase. No idea how long they will last but for this first project, much better suited for my task than I realized when placing the order. Very satisfied!
Birdman
2025-06-14 16:02:29
They are not bad for the money, BUT, my first cut with these was on a small piece of maple, routing out a 3" circle. In 30 seconds the bit broke on the bottom edge. I just used a longer one and adjusted the router to finish, but they should not break cutting 1/4" into maple. Amazon/seller replaced the set, but common man!
HF
2025-05-16 13:50:50
Came quickly
Dale Eldridge
2025-05-02 13:35:19
This set works perfectly. I used them to cut in windows and door opening of a garage. Good quality product.
Patrick S.
2025-03-24 16:24:19
One of these arrived with a chipped end. Two of the remaining bits worked quite well and the last one broke a tip cutting relatively soft Alder wood. They are priced appropriately for a "need this for this one small job" kinda thing.
Juan R.
2025-02-23 12:25:42
Muy bueno. Gracias.
Marta L.Arthurs
2025-02-21 13:17:20
love these for flush trim, but one roller failed and had to be replaced.
dharwood
2025-01-23 16:41:22
I needed to install an under mount sink on a butcher block countertop. And to finish the cut Perfect, I made a jig, and the Cut could not have been a cleaner cut. Really finished the project off perfect.
Jerzy Pawlowski
2025-01-10 11:24:24
exellent