Your cart is empty.
Your cart is empty.
Product Name:USB3.2 Gen1 Front TYPE-E Expansion Card
Product Interface:USB 3.2 Gen1 TYPE E (A KEY) & USB 3.0 20-pin socket
Product chip:Renesas D720201
Transfer rate:5 Gbit/s
Support System:XP/ WIN7/ WIN8/ VISTA/ WIN10/ WIN11 32BIT/64BIT/ LINUX OS System
Product Features:
This product can convert the PCIE high-speed data transmission interface of the computer into a TYPE-C 3.2 gen1 front-end high-speed data transmission interface (TYPE-E 5Gbps) and a built-in USB 3.0 port.
Package Contents:
1* USB 3.2 gen1 TYPE-E expansion card.
1* Low profile bracket.
R. S.
2025-08-25 21:29:07
Used this for the front-panel connector on my new case to work with my older motherboard. Works like a champ. Windows 10 found it and installed drivers, and it's reading/writing well, and quickly.
Nick
2025-08-11 16:10:11
I got this card because the AMD ASMedia USB controller on my motherboard had lots of issues when connecting an iPad or iPhone. When looking online for information on a better USB controller, I was told to go for Renesas chipset (like this card has) or Fresco Logic, and to avoid VIA and ASMedia. I guess if there are negatives, it's that this card only supports 5 Gbps (PCIe Rev. 2.x, I believe - PCIe Gen3/4/5 would offer way more bandwidth on a 1X connector). However, it's been 100% reliable (so far), and I like that *way* more than using my motherboard's 10-20 Gbps ports that almost never work. This USB card does what it's supposed to do. No issues. If you're having trouble with your case's front USB ports working with various devices like iPhone, give this card a try.
Sean McDougall
2025-08-07 11:24:49
I typically don't trust brands that I have not seen or herd of.However for the price these were offered, I rolled the dice.I purchase 3. One for each of my kids computer which needed usb-c supply.These plugged right in, and fired right up.No problems what so ever. Windows installed drivers before the desktop loaded.I do recommend these to anyone in need of internal motherboard expansion.
Customer
2025-05-21 16:49:38
This adapter enabled me to use my cases usb c port for vr on a motherboard thar has no c ports. Only complaint is the connection can be loose without it seeming loose, so make sure everything is plugged in firmly before you close up your case
M. W. Folsom
2025-04-27 13:29:37
Just replaced a badly functioning USB add on card with this, a BEYIMEI PCI-E 1X to USB 3.2 GEN1 5Gbps 20pin Front Panel Header, and a GRAUGEAR 3.5 Inch Front Panel USB C Hub and it just works nicely. Running on a Windows 10 Pro - no added drivers needed.
kole s linnenbrink
2025-03-03 14:08:27
My motherboard had a broken 19-pin connector for the front panel USB ports, i popped this into a spare pci slot and now my front USB works again, very pleased. Install is very quick if youve worked with replacing/adding pc parts before
Chris
2025-02-19 17:36:02
Riceware trash.Will repeatedly prompt "windows OOBE create elevated object server" UAC prompts on windows 10 devices. I am suspicious the device is injecting malware - and it would be able to do it given that it is connected to your USB lanes.Doesn't even work. Corrupts data downloaded through attached USB lanes. Slows your computer down to a crawl for no reason.Fresh windows install with the card removed resulted in much better performance. No longer got OOBE prompts.As if it wasn't bad enough that it doesn't work, there's a high chance it is trying to steal your data. It has access to your USB lanes, so it would certainly be able to install malware on its own, which is likely what it is doing
JC
2025-02-04 10:22:27
My computer case has a USB-C port, but my motherboard did not have USB-C port to plug the case cable into, So got this small card, and added it to a PCI-E X1 slot, and it was recognized by my OS Win 11, and just works, no driver install needed in my case. Plugged an external CD Drive into my newly activated USB-C port, and it works great. This small add on card, does it job. Happy with purchase.
Mark Sherratt
2025-01-27 13:31:03
installed, together with EZDIY-FAB 5.25 inch 10Gbps Usb 3.1 Gen 2 hub, this has further prolonged and enhanced the usefulness of my ever faithful 2012 HP elite 8300 SFF Desktop.
Stylometric
2025-01-22 11:41:12
I built a PC last year but didn't acknowledge when building it that my motherboard did not have a USB C port to power the USB C on the top of the case (I have the NZXT H510). For a long time, I wondered if I could find anything extra to install which would allow me to use this port. Thankfully, I finally came across this PCI-E card from Beyimei which let me power the USB C slot on my PC case. It took about 10 minutes to install and works a treat.
Steven C.
2024-12-31 18:23:53
Acheté pour transmettre les ports USB-A et USB-C avant de mon boitier à une VM, la carte est bien reconnue par ESXI 8.0 U2 et n'a aucun problème lors du passthrough.
Alexander Hult
2024-12-26 17:35:44
Works like a charm!
Maurizio
2024-11-29 11:58:57
Scheda pci-e non mi a dato nessun problema funziona bene prezzo ragionevole consiglio .
Recommended Products
