Your cart is empty.
Your cart is empty.Product Description
The Prier P-164 has all the characteristics of the historically proven Prier wall hydrants with the added benefit of an easy operating quarter turn valve that features a proven compression type seal. The P-164 is the easiest operating valve available. The P-164 features a soft grip operating handle for easy operation in wet conditions or cold weather. Prier Wall Hydrants provides a year round source of water to areas that are subject to freezing temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating the possibility of freezing.
From the Manufacturer
PRIER residential hydrants are the finest quality available. Made from heavy cast brass patterns, copper tubing with stainless steel and aluminum accessories, these hydrants are designed, built and tested to last for the life of your plumbing system. PRIER stems are made with heavy brass ends and are secured at the handle and at the seat with long wearing ACME threads. Since we secure our stem at both ends of the valve, we can manufacture a hydrant to virtually any length and not encounter problems associated with stem seating, rattling, or noise under flow. PRIER offers eight different residential models with as many as seven standard inlet options, twelve standard lengths and options for custom lengths and plating finishes. We make variety and customization a priority at PRIER so you can have the valve you need, when you need it.
D McNulty
2025-08-13 18:22:25
I had previously purchased this and really enjoyed using it. It was installed on a spigot that isn't used often but I would find myself using it more because of the ease of use this bib brings. So when the chance to put another in came up, I jumped right on it and ordered this one again. It turns so easily. Doesn’t leak! Very durable functions better than anticipated. Great product, pricey but worth it. Looks nice as well!
waterdog
2025-07-10 16:30:27
I installed a full turn Prier faucet in one location a few years ago and was pleased to find these quarter turn faucets when I was ready to upgrade two other outdoor faucets. So far they are working well, and I prefer the quarter turn over the full turn, though both function well.
James A. Ray
2025-07-07 15:59:44
So far so good. I like the 1/4 turn to go from closed to fully open. While the faucet works fine you need to hire a professional to do the install unless you are a really good DIY'r. I live in the south and this faucet is too short for a standard brick wall with 2x4 studs. I got lucky and found a female to male adapter that effectively extended this faucet another 1/2" to 3/4". I tried the 6" long frost free faucet and it is too long and shortening this thing isn't an option. If you decide to use this 4-1/2" version in a standard 2x4 stud wall with brick exterior you will either have to cut the wall open from the inside to reposition the plumbing or you will have to modify the length of this faucet so it will work. I found an extension/adapter fitting at McMaster: http://www.mcmaster.com/#50785k31/=10mxgoiThis fitting screws on but it needs to be soldered after screwing it on. This requires steel bristle brush, Flux, Solder, and Torch. The reason you want to solder this is in case in the future you need to remove this fixture and reinstall your old one. You risk having the adapter/extension you screwed onto the end of this faucet stay in the wall. By soldering it to the fixture you guarantee that it comes out with the fixture and you guarantee it never leaks at that connection. Before you can solder that fitting onto the end of this faucet you have to disassemble the faucet. It has delicate rubber seals inside that will melt if you try soldering the adapter/extension on without disassembling first.For most people this isn't a DIY job and it could cost you thousands of dollars in damages to your house if you screw it up.BUT! This is an excellent faucet for a professional or a very experienced DIY'r.
suresh
2025-07-05 15:00:16
It was very to put together and use it. Veeru sturdy and solid product
Megan B Goranson
2025-06-14 16:06:56
bad casting, leaks below the stem out the actual casting. Antisiphon is failing already and pops off if the hose is kinked or has a nozzle that creates any backpressure. I now either have to rip off brand new siding or cut into a brand new drywall job to replace this piece of garbage.
DES
2025-03-13 17:14:21
Prier is tops in our book. High quality solder joints, best design ðŸ‘
Michael
2025-02-14 15:35:02
It is performing great, was easy to install, nice appearance and no leaks.
Mr Bee
2024-12-22 10:54:31
When I received the valve, I turned the 1/4 turn handle to open and blew into the end. No air wasn't going through in the open position. I thought I had a defective unit. I then hooked up a temporary water line and the water did flow with no problem. Maybe the Anti-Siphon feature was in locked position? After that the valve works great and I love the 1/4 turn workings.
Recommended Products
